Simly follow to the place from which they are going out Positive Cable should be attached to the starter cardburator or so negative cable (it's hard to say but you should find it) / why do you need to change them are they damaged ???
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
START BY REMOVING THE NEGATIVE CABLE FROM THE BATTERY. REMOVE THE POSITIVE CABLE FROM BOTH TERMINALS, REPLACE WITH THE NEW ONE. AFTER THIS ONE IS SOLID IN PLACE AND THE CONNECTIONS ARE TIGHT, RECONNECT THE NEGATIVE CABLE.
SEE IN THE OWNERS MANUAL IF THERE IS A RESET PROCEDURE (BATTERY CHANGE).
Why did you change the battery? Was the car running before you changed the battery? Did you remove your negative cable first before your positive cable on your battery? I ask cause sometimes people ground the positive cable to ground when they remove their battery and blow a fuse or relay. If they are good check your battery and starter you might have a loose cable. Let me know how you make out.
The battery is under the hood, just behind the passenger headlight.
There is a black bar that crosses over the battery and goes back towards strut tower. Remove this bar and the three bolts; probably a 12 or 13mm socket.
Remove the negative (black) battery cable with an 8mm socket or wrench. A 5/16" should work also.
Then remove the positive (red) cable with same socket.
Remove the battery clamp and bolt. Probably a 12mm socket with extension.
It's tight, but the battery can be removed.
Reverse instructions for installing the battery. (That includes hooking up the red battery cable first, then the black cable.)
it is in the trunk under the mat not to hard remove the mat take off the cables disconect hold strap replace the battery replace strap cables and mat just make shure you pot pos cable on pos and neg cable on neg
You need to keep a supply to it. You can buy various devices that plug into your cigar lighter. The quite simply have one of these square 9 volt radio type batteries in them. This keeps power on while changing battery. You could easily make something up with one of these batteries and a couple of leads going to the terminals after loosening the bolts. Be careful though and make sure your wires are secure so the do not come off while wrestling with the battery. Cheers John