Question about 1997 Buick Park Avenue

2 Answers

'Whats wrong when my back window wont defrost in my 97 park ave.'

Posted by on

  • Anonymous Jan 18, 2009

    Rear defroster is completely dead. Stopped working after a slight electrical burning smell was noticed. I do not know where the fuse is for this because no owners manual was with the car when I bought it.

  • Scotty
    Scotty May 11, 2010

    Some additional details would perhaps help solve your issue.

    Is it completely dead or does it just defrost in certain areas or along strips in the window?

    Have you taken any corrective actions? In other words, have you tried anything to fix the issue so far?


×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If your kneeling on your back seat facing the back window, on the left side behind the liner on the side there is a small black box that your rear defroster and your aireal plug into, chances are that the connection for your defroster has burned out, mine was totally melted.

Posted on Apr 08, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am also having the same problem. I think it might be the fuse,but I must it first.

Posted on Jan 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I installed a new blower motor in my 97 buick park ave the new motor only has one connector so I'm left with a loose wire now I have no interior lights no rear defrost and my air bag light is on


One connector with two wires . A red an black . They both come from the blower control module . You have the wrong wires , because this would not effect the lights or make the air bag light come on or not cause rear defroster not to work .

Nov 10, 2015 | Buick Cars & Trucks

1 Answer

I have a 94 buick park ave. It wont blow out of the vents only the defroster and floor


you must have a bad vacumm leak check underneath the hood and follow the hoses leading to the intake manifold towards the firewall.

Apr 19, 2013 | 1994 Buick Park Avenue

1 Answer

Have a 91 park ave when i rev up the motor it makes a popping sound whats wrong with it?


Sounds like the timing needs adjusting and/or the fuel mixture control. Make sure you have clean air and fuel filters in first.

Apr 06, 2011 | 1991 Buick Park Avenue

2 Answers

Back defrost don't work on 97 buick park avenue


Regarding the repair of the rear window defroster. There is a "electric ACD module" on the inside rear driver side roof sail that connects to the rear defroster and antenna. I had the same problem and found the connector for the defroster had overheated and melted resulting in a failed connection. The NAPA part numbers for the module and replacement connector are 25623688 and 15305949.


Oct 07, 2009 | 1997 Buick Park Avenue

2 Answers

Need wiring diagram for rear defroster.


The common problem with the rear defrost not working on a park ave is the antenna integration modules on the rear c-pillars. This is the way they make the rear defrost and antenna part of the same grid on the rear window. If your external mirrors are heating up, the rear window is getting juice too. They are fed from the same circuit. And yes, the relay does go in a particular way. Compare it to the position of the others nearby and insert with the same orientation.

Sep 15, 2009 | 2000 Buick Park Avenue

1 Answer

My back windows wont go up and the doors wont lock. door ajar light pops on


Will the windows go up and or lock from the respective doors? Is this the master control on the driver that does not respond? If so remove the driver door panel ( see 97 Park Ave door lock for instructions ) and check the wireing harness located under the switch control panel, make sure all are pluged in well and are not damaged. If the wireing harness is in good repair You might want to check salvage yards for the appropiate control switch replacement. ( watch them remove it from the junker and you'll know how to install it )

Jul 08, 2009 | 1997 Buick Park Avenue

1 Answer

Cd player


Chech the fuses quite possible 1 is blown

Apr 17, 2009 | 1997 Buick Park Avenue

1 Answer

'Whats wrong when my back window wont defrost'


yes and check wiring,does the demist light come on on the switch or dash?

Jan 06, 2009 | 1997 Buick Park Avenue

2 Answers

Where is all the fuse boxes at in a 97 park ave


you would need whats called a bcm body control module a little box under center dash .get on
car-part.com to buy one used it will save you alot of time and money

Dec 24, 2008 | 1997 Buick Park Avenue

2 Answers

Temp sensor for 1991 park ave


I have a 1991 buick century that keeps stalling but starts right back up but know it wont start at all

Jun 19, 2008 | 1991 Buick Park Avenue

Not finding what you are looking for?
1997 Buick Park Avenue Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...