Hey, I just bought an 03 Tiburon GT and it did not come with any remote key fobs. I bought one online from eBay and it seems like a brand new key. I took it to Hyundai and they claim they cannot pair it to the computer in my car. Any suggestions on what this may be or what I can do to get the remote working with the car?
Seriously don't use the factory alarm system / keyless entry.
While my car was under warranty, the alarm malfunctioned and it wouldn't disarm. The solution was to have the car towed to a dealership and install a new BCM. This would have cost me over $1,000 - and it's not an isolated case.
Don't get a Hyundai key fob. Have an after market alarm / keyless entry installed. It will be cheaper & easier.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sep 1, 2011 - Uploaded by tyreeztt
Also if your remote isn't working with a new battery please check out this ... TO - Change the battery and quick fix your car remote / keyless entry ...
Apr 17, 2010 - After I changed the battery, it would no longer lock / unlock the doors. ... I can start the call and all .. its just the door and trunk lock / unlock function that does not seem to work . ... now your fob is learned... the keyless entry goes into a "sleep" mode to preserve the batt.. if u do not use the ... Still don't work .
CarGurusAug 17, 2009 - i change my battery an now my lock an un lock buttons dont work on my remote how o i reprogram it? ... I have a Hyundai 2003 Tiburon, and the followingworked for me, get ... However for a replacement keyless remote fob, you will have to go to ... And no, they don't do it for free (ranges from $30-$50 in my ...
Key fobs that don't permit entry can be a major hassle for drivers, but fortunately, there... Drivers with a bit of basic electronics experience are often able to replace their ...After confirming that a remote is faulty, try replacing its battery. ... like "Jeep Wranglerkeyless remote," to find listings that will work with specific vehicles.
Well, you basically have only 3 choices: 1. Pay the fee at the dealership 2. Purchase the high-dollar equipment that is required to perform the programming procedure 3. Forget about adding another key fob to tor vehicle.
TECHNICAL SERVICE BULLETIN
Group 90 - ELECTRICAL
Date October, 2003
Model Elantra 2001-2004, Santa Fe 2001-2004, Sonata 2002-2004, Tiburon 2003-2004, XG(NNN) NNN-NNNNand XG(NNN) NNN-NNNN2004
Subject SECURITY SYSTEM KEYLESS ADAPTER CABLE
This bulletin supersedes TSB # XXXXX DESCRIPTION: The security system keyless adapter cable (SPX/Kent-Moore P/N 09900-21300) is a special service tool (SST) that is used for programming new keyless entry remote transmitters to the factory security systems. The keyless adapter is used in conjunction with the Hi-Scan Pro (with Hi-Scan SOL Pro Software Version 09-29-03 or newer) and Data Link Connector (DLC) Cable. SERVICE INFORMATION: The keyless adapter cable can be used on the following vehicles: ^ 2001 -2004 Elantra ^ 2001-2004 SantaFe ^ 2002 - 2004 Sonata
This reset for key fob Hyundai coupe year 02 to 04
Turn ignition to position two
Press lock or unlock once
Ensure indicators flash once to confirm reset
This will enable fob providing you have no other faults
Good luck barry
you can get it to crank but you just won't be able to use the keyless function without going back to the dealer first locate the ecu fuse in the fusebox under the dash, pull it out but don't put it down. Next put your key in the ignition and start turning over the motor, now the car won't crank or push oil through the motor with the ecu deactivated so don't hold it for too long. Now as your turning the motor over, reinsert the ecu fuse. The car will fire to life...you will have essentially reflashed your ecu so people with tuned ecu's beware. Your keyless won't work but hey at least now you can drive to get it fixed...as for the naysayers, yes I tried this on my tiburon and it still works fine so don't worry...good luck
My used 2003 Passat came with both fobs unable to hold a key. I had to break them open to retrofit a loop. These are some great links that I bookmarked. The first one should give you programmin instructions.Good luck!
2000 Mazda 626
Note:Make SURE the battery is new. Instructions for programming ONE keyless remote fob. 1.Open the driver’s door & leave open. 2.Insert the key in the ignition. 3.Turn the key to the on and off position 3 times. 4.Remove the key from the ignition. 5.After door open chime stops, press the door open button 3 times. 6.After chime, press any fob key twice. 7.After second chime, press any fob key twice again. 8.After third chime, press any fob key twice again. 9.Press the door open button once. 10.The car should give another acknowledgement chime. 11.Test key fob. This DOES work. I just programmed mine successfully today, three hours ago.