Question about 2000 Pontiac Sunfire

3 Answers

Turn Signal Switch where is it located

Not sure where turn signal switch is located so we can replace it. Thank you

Posted by on

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 344 Answers

The turn signal switch is located on the left hand side of the steering column. You have to remove the air bag (be aware, if you remove the air bag incorrectly, it could activate and cause an injury) and the steering wheel to replace the turn signal switch. The stalk that is sticking out of the left side of the steering column is attached to the switch that controls the turn signal. Either get a good repair manual or take the car to an authorized repair station for that type of car for this repair

Good luck!

Posted on Jan 06, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Try looking under the dash somewhere. hope this helps

Posted on Jan 06, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Director Badge:

    Uploaded 100 video answers.

  • Expert
  • 159 Answers

Here's a video that will show you where it is and how to replace it.">

Posted on Jan 25, 2011

2 Suggested Answers

chuck943
  • 783 Answers

SOURCE: turn signal switch

The electronic flasher is located under the dash just to the right of the steering column above the accel pedal.It has a 5 wire connector wire colors are W/R,LB,Y/LB,P/O,BK.

Posted on Feb 02, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

After using turn signal you can still hear clinking, is hazard relay part of turn signal


The hazard switch is also the device that supplies the turn signal "flash". If you continue to hear the noise of the turn signal flashing when the turn signals off than the problem is the turn signal switch. It is grounding The purple wire from the hazard switch which makes the hazard switch think the turn signal is on. The fix for this is to relace the turn signal/multi-function switch. Typically they will start to go bad in stages. Your symptom is the first stage. Eventually either the turn signals or the brake lights will also sto working. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Feb 10, 2012 | 2000 Oldsmobile Alero

3 Answers

I have a 2000 ford explorer and both my 4 way flashers and turn signals are not working


check the fuses and both flasher cans,if not working then,u need to check the blinker switch

Dec 23, 2010 | 2000 Ford Explorer

2 Answers

1999 pontiac grand am - loud buzzing sound when I turn on the turn signal. Turn signal lights are lit (on) but steady, they do not flash. If its the turn signal switch - where is it located?


ON THIS YEAR 2 THINGS ARE USUALLY THE PROBLEM. THE TURN SIGNAL SWITCH OR THE HAZARD SWITCH. IT DOESNT HAVE A FLASHER. THE FLASHER IS INTEGRATED IN THE HAZARD SWITCH. ITS ABOUT 20 BUCKS FROM THE DEALER. THE TURN SIGNAL SWITCH HAS TO BE REPLACED AS AN ASSEMBLY. THE COLUMN COVERS HAVE TO COME OFF AND THE WHOLE ASSEMBLY NEEDS TO BE REPLACED

Aug 15, 2010 | 1999 Pontiac Grand Am GT

2 Answers

Turn signal clicker comes on randomly but doesn't affect lights


No the dash is the hazard light switch, it's also the turn signal flasher, dealer part only replace, replacing it will fix your problem. Feel the switch when you hear the clicking.

May 21, 2010 | 2004 Chevrolet Malibu

2 Answers

Left signal wont turn off, and right signal wont


I Think your turn signal switch is most probably faulty. So that, you will need to replace it. Please, check the video below. It shows the operations to replace the turn signal switch. I think that the operations are quite similar in most modern cars. Good luck!

How to Easily Replace a Turn Signal Switch - Clio 2 and other Renault/Dacia

http://www.youtube.com/watch?v=JKiy-F8pd6o
How to Easily Replace Turn Signal Switch Clio 2 and other Renault Dacia

Mar 27, 2010 | 2004 Saab 9-3

2 Answers

96 monte carlo rear window brake light works but not brake lights. tail lights work, blinkers work, replaced brake switch and bulbs still not working


This is a common GM specific problem. Your turn signal switch contains an elaborate networking device that has to cancel brakelights while running a turn light. Often times the ground within the turn signal switch is lost causing your situation. After investigating such other possibilities as fuses and loose grounds it may become necessary to replace the turn signal switch. Thank you, Dana

Sep 21, 2009 | 1998 Chevrolet Monte Carlo

3 Answers

1997 dodge avenger turn signal probs and location


replace the turn signal switch it self, mine did the same thing with the left turn signal, put in fuse and it will continue to flash... went to junk yard pulled one out of a 97 avenger just like mine, swapped them out and now it works fine. looked to be like some corrosion... to repace: 3 screws under columb, 2 screws on side of signal switch (black plastic side). unplug and replace

Mar 20, 2009 | 1997 Dodge Avenger

2 Answers

Turn signal switch is dead. Not working at all. Not sure where its located to replace the switch


hi how are you? the turn signal switch is behind your steering wheel in the column.must remove horn assembly.then steering wheel,use puller to remove wheel.next remove clip that holds steel plate.(tool required).remove plate.then remove any steering column covers/plastic.then remove screws for turn signal switch.unplug wires and remove.then reinstall in reverse.

Feb 02, 2009 | 1993 Mercury Cougar

1 Answer

1990 turn signal switch


it was the turn signal switch thank you very... thank the apprentice for the expert knowledge

Dec 03, 2008 | 2000 Chevrolet Lumina

1 Answer

2000 chrysler cirrus


Hi...
You are looking for the location of the TURN SIGNAL FLASHER.
The turn Signal flasher on a 00 Chrysler Cirrus.
Is mounted inside of the Turn Signal switch.
Some model If you remove the steering cover you will have axces to the Flasher.
But In some Model you will need to replace the Multifuntion Switch ( Turn signal switch)

OK.. I hope this help on your question.
I'm Based on a AUtorepair Software. to give the answear..

Thank you for use fixya..

Aug 06, 2008 | 1996 Buick Century

Not finding what you are looking for?
2000 Pontiac Sunfire Logo

427 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

63584 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...