Question about 1999 Isuzu Rodeo

1 Answer

1999 isuzu rodeo

Power windows master switch no drivers down rf rr down only lr down all passenger windows work from there window switch

Posted by on

  • Anonymous Mar 30, 2014

    passenger side power window cable is un hooked

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

The master switch is bad sad to say....they suffer greatly from manufacture defects....you can try to exchange it or find a new one
i went through 3 new ones to get a good one....i know it is expensive but the dealer may be your best bet, you can try it in the parking lot and the parts guy can watch you install it....then they have no choice but to honor the new part warranty if the new one is defective also....thanks

Posted on Jan 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 trail blazer-power windows won't work and a/c only blows from the bottom


All the power windows are inoperative ?
Power Window System Components
The power window system consists of the following components:
?€¢
Driver door module (DDM)

?€¢
Passenger door module (PDM)

?€¢
Body control module (BCM)

?€¢
LR power window switch

?€¢
RR power window switch

?€¢
Window up and window down relays in each of the rear passenger window switches

?€¢
Window lockout switch

?€¢
Reversible power window motors in each of the doors (circuit breaker protected)

?€¢
LT DOOR CB 25A (System power for left rear window)

?€¢
RT DOOR CB 25A (System power for right rear window)

Are you aware of the electronics involved ? control modules - computers ? Are you good diagnosing electrical problems . Do you own a professional scan tool ?

  1. Install a scan tool.
  2. Monitor the Driver Window Status Data parameter in the driver door inputs list.
Does the Driver Window Status Data parameter display an active state?
Your best bet would be to take your vehicle to a qualified repair shop . For both problems .

The Trainer 24 Power Window Troubleshooting

Oct 26, 2016 | 2005 Chevrolet TrailBlazer

1 Answer

Turn signals do not work, have replaced module, still do not work


Find a wiring diagram an get a DVOM - digital volt ohm meter an do some electrical testing . Videos on you tube on basic automotive electrical testing , how to read a wiring diagram . Then go http://bbbind.com/free_tsb.html free wiring diagrams . What component controls windows an door locks , I know what does , what to see what you think does . The speedometer not working is probably the step motor inside the instrument cluster . New instrument cluster ! Replace the turn signal switch.
The vehicle is equipped with power door locks. Each lock actuator is powered and controlled by the door module mounted in the individual door. The driver door module (DDM) is the master control for the door lock system but the rear integration module (RIM) contains the program that determines when the lock functions are permitted.
The vehicle is equipped with power windows controlled by the door modules. The DDM receives a window switch request, over the SBI serial data, from either the passenger door module wired to the window switch pressed or from the driver door switch assembly. The DDM checks the Class 2 serial data to see if the status information is correct (i.e. ignition switch position) to permit window operation.
If the status information to permit window operation is correct, the DDM sends the command to the door module controlling the window to move the window as requested.
Windows Power and Ground
The windows are powered by discreet power and ground circuits. These circuits are in the same dedicated connector as the window motor drive circuits.
These systems are very complex and are able to set DTC'S in the controlling module .Your best bet is to take your vehicle to a qualified repair shop .
DTC B3142 LF Unlock Switch Circuit Low DTC B3147 Passenger Unlock Switch Circuit Low DTC B3152 LF Lock Switch Circuit Low DTC B3157 Passenger Lock Switch Circuit Low DTC B3172 RF Window Up Switch Circuit Low DTC B3177 RF Window Down Switch Circuit Low DTC B3182 LR Window Up Switch Circuit Low DTC B3187 LR Window Down Switch Circuit Low DTC B3192 RR Window Up Switch Circuit Low DTC B3197 RR Window Down Switch Circuit Low DTC B3377 LF Window Up Switch Circuit Low DTC B3382 LF Window Down Switch Circuit Low DTC B3387 RF Window Up Switch Circuit Low DTC B3392 RF Window Down Switch Circuit Low DTC B3397 LR Window Up Switch Circuit Low DTC B3452 LR Window Down Switch Circuit Low DTC B3457 RR Window Up Switch Circuit Low DTC B3462 RR Window Down Switch Circuit Low DTC B3467 LF Window Express Down Circuit Low DTC B3472 RF Window Express Down Circuit Low DTC B3527 Window Lockout Switch Circuit Low
DTC'S are intended to point the qualified technician in the correct diagnostic path. You may have a communication or network problem . Are you familiar with class two serial data bus communication network . The simple bus provides a means for information exchange among the vehicle door modules. Door module information on inputs and commanded outputs are converted to serial bus interface data for exchange among the door modules. The DDM can also take information from modules connected to the class 2 serial data circuit and relay the command to the simple bus interface. The vehicle power mode message (ignition switch position) from the DIM is an example. The DDM periodically addresses each module on the simple bus interface. When a module does not respond to the DDM, the DTC for that module is set. You can't just replace these modules , some need to be programmed . Dealer only ! First check codes , power an grounds etc....

Jun 29, 2016 | 2000 Buick LeSabre Custom

1 Answer

What does the master window switch control on a 2003 trailblazer


The master window switch will control LF window, LR window, RF window, and RR window. There is also the door lock switch on the module and a window lock switch.

I hope this is helpful.

-Scott

Feb 14, 2015 | 2003 Chevrolet TrailBlazer

1 Answer

The rf rr and lr windows all quit working at the same time motors operate when you suply power and ground right at the window motors


There is a switch on the driver's side next to the P/W controls that locks out all the windows you mentioned and prevents them from being operated. Check to see if that switch has been activated. If it has not been activated then there is something wrong with that switch.

Nov 27, 2009 | 2001 Pontiac Bonneville

1 Answer

Power windows isuzu rodeo 1999


Cable must of disconnected need to take door cover off and reconnect...

Dec 30, 2008 | 1997 Isuzu Rodeo

1 Answer

Power windows


This means you need to head to the junk yard and replace the unit that controlls all the windows from the drivers seat. Very simple fix. Good luck

Dec 30, 2008 | 1997 Isuzu Rodeo

1 Answer

Rear passenger window will let down but not up


you could use a simple piece of wire to cross the pins on the back of the connector on the switch. a 14-16 gauge piece of wire is fine.  it sounds like the switch has gone faulty. 
i think on your vehicle the window switch colors should be
LF=Dark Blue, RF=Light Blue, LR=Dark Green, RR=Light Green this is for window up. just jump these to a positive feed located next to it.

Nov 28, 2008 | 1999 Oldsmobile Intrigue

Not finding what you are looking for?
1999 Isuzu Rodeo Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...