Question about 2000 Pontiac Sunfire

2 Answers

Turn Signals = when turned on they do not blink

When the signals are turned on they do not blink except when signal handle is pushed up and down and occationally when it decides it wants to work.

Posted by on

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Bright's come on cruise control out and blinker not working hazards do flash

Posted on May 31, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 107 Answers

The turn signal switch is or wore out or broken internally and needs to be replaced. Mike

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blinkers only work sometimes


chevy had an issue with the blinkers and hazards not working all the time i found that when my turn signals stop working push the hazard switch until they blink then the turn signals start working again. its a faulty turn signal/hazard switch that needs to be replace costs about 30 bucks pretty simple to replace.

Dec 24, 2010 | 2000 Chevrolet Malibu

1 Answer

Turn signals not working in a 1993 Jeep Grand Cherokee


fuses good? turn signals come on but won't blink? check blinker switch under dash at fuse panel, it will be a round push incylider next to fuse panel, with signals on put your finger on round cylinder, if you don't feel it click, it's bad.also if not that check for a blown bulb in turn signals. hope this helps!!

Nov 11, 2010 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Turn signals come on but do not blink.


ARE THE FRONT AND REAR TURN SIGNAL INDICATOR BULBS ON STEADY AS WELL?

Sep 29, 2009 | 1972 Chevrolet Corvette

1 Answer

2003 ford explorer sport turn signals blink rear brake lights


The ford explorer sport track. Will have a short either at the plug of the multi-function switch or 6 inches down where the column bends the wires during tilt.

Sep 05, 2009 | 2003 Ford Explorer Sport

1 Answer

2004 monte carlo. Turn signals dont work. The stalk still works with other functions, such as wiper, brights. The fuse is fine. Could it be a bad relay? When u push the stalk up or down nothing happens on...


try pressing the hazards on and off if they still don,t work replace the flasher unit. it is built into the hazard switch( all one unit ) change this and all will be good.

Aug 30, 2009 | 2004 Chevrolet Monte Carlo

1 Answer

Turn signal problems


Turn signals have a relay (its a small switch that charges and discharges current) which controls your turn signals blinking speed and interval. This is most likely your problem. You should be able to get a new one at your local parts store. Follow these instructions, in this order, and let me know how it works.

Step 1:Turn on the hazard lights and walk around the Taurus checking that all four turn signal lights are working. If any of them are not working, replace the bulbs. A non-working bulb in any of the turn signals will often make the turn signals appear that a flasher is going bad.

Step 2:
Locate the fuse box and check the fuses for the turn signals. There may be more than one. Replace any fuses that are blown and then recheck the turn signals again. If they still aren't working properly, then move on to replace the flasher. Step 3: Look for a round, silver-colored object near the fuse box. Put your finger on the object and turn on the turn signal. You should be able to feel a mechanical clicking as the turn signal blinks. This is the flasher. Step 4: Pull the silver flasher out of the socket and replace it with the new one. Each of the flashers should have two pins sticking out of the bottom side. Start the Taurus and recheck the turn signals to ensure that they work. Joel

Mar 04, 2009 | 1999 Ford Taurus

1 Answer

Turn signals 2003 Ford F-150


Sounds like the turn blinker is shorted internally. Suggest you change it out, to test this.

My next check is that no wiring is melted and burned, such as can happen with any connection to tow a trailer. U-Haul has fine print that indemnify them of any problems they cause! have you towed anything recently?


Dec 25, 2008 | 2005 Ford F-150

6 Answers

Both turn signals do not work or works intermitantly


There is a recall on the alero for this issue. We had the same with our 01 alero and they fixed it under the recall.

Jul 26, 2008 | 2001 Oldsmobile Alero

1 Answer

1973 vw beetle sedan--turn signal


i beleve the flasher on this cars, i suppesed to have a ground cable
most of times it is brown color, try to locate the flasher and make sure you have the ground and also the ignition switch power going to the turn signals flasher

May 27, 2008 | 1998 Volkswagen Beetle

Not finding what you are looking for?
2000 Pontiac Sunfire Logo

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...