I replaced front and rear brake pads on my 04' G35 sedan. The old brakes were about 75% worn and I replaced with a premium ceramic pad (car was braking fine). I had no problems replacing the front and rear pads and did not have to bleed the brakes at all. After the job was complete, I started the car, slowly pumped the brakes 2-3 times to get a good firm pedal. Immediately, the VDC and Slip Lights came on but brakes are working great. Now...when you first start the vehicle, the "service engine soon" light comes on and the car will run for about 30 seconds and DIE. When you restart it, the VDC, Slip light and Service Engine Soon light come on and the car runs OK. Any ideas before I have to fork out dollars to diagnose?????
An expert who has achieved level 2 by getting 100 points
I would take the car to almost any auto parts store and ask them to check the ODB II computer for codes and to reset the "Check engine light". Get the code that they tell you and it should go a long way to pointing you in the right direction to fixing this problem. It might also be that when you pumped the brakes that you somehow set a code in the computer from the ABS system and now that you have the brakes pumped up and working correctly resetting the Check engine light might fix your problem.
Good luck! Write back with any code you get and I'll see if I can help you figure out what the problem might be.
Posted on Jan 06, 2009
Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!
Posted on Jan 02, 2017
Apr 04, 2017 | Cars & Trucks
Jul 18, 2014 | Nissan Pathfinder Cars & Trucks
Jun 21, 2014 | 2007 Infiniti G35 Sedan Sport Sedan
Feb 01, 2011 | 2006 Infiniti M35
Jan 25, 2011 | 2005 Infiniti G35
May 06, 2010 | 2004 Nissan Titan
Feb 13, 2010 | 2007 Infiniti G35 Sedan Sport Sedan
May 25, 2009 | 2004 Nissan Titan
Dec 06, 2008 | 2005 Infiniti G35
Oct 31, 2008 | 2004 Nissan Titan
2,184 people viewed this question
Usually answered in minutes!
My VDC OFF and Slip light and check engine light come on too and the car dies, I dont know if I should bring it to the dealer, or what, but it's a G 35 2003, and this started right after I had the transmission oil changed.
Same lights, but my breaks will not operate????
awd light, brake light,and battert light comes on, and car loses power. Just replaced brake pads today. Pads were worn down to nothing
VDC and slip sensor lights come on
TheVDC Off and slip indicator light comes on and at times the card dies.
The VDC indicator and Slip indicator come on and the car will die at times.
The VDC off and slip lights come on in the car and at times when they come on the car dies.
My dash displayed VDC OFF and SLIP and while driving my car died. I went to start it an it took a few seconds for it to start.
The VDC and SLIP light comes on in the dash and the car will just die while im driving. sometimes when I accelerate the car doesn't seem like its getting gas. When I try to restart the car it takes longer for the car to start.
×