Question about 1988 Chevrolet Nova

1 Answer

1988 nova..... trying to find a picture of the heater fan motor so I know what to expect before I take it out. It's 40 below and I don't want any surprises. robbi

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Robbi, I know it sucks not having a blower but in my experience replacing my blower fan at home , I would not recommend tackling the job in cold weather. Even in the warmth of the Minnesota summer it was a bear to reach up underneath the dash to reach the three soft metal screws. I stripped the head on one but was able to get it out with my vise grips. The second one came out fine but I had to use a mirror to get a vantage peir at the head. The last one was right in front. and was easy to remove.once the screws are out you need to wrestle with the cage to shimmy it out of the housing. And yes, I took the motor apart and it was the brushes that were warn to the nibbins.
EF

Posted on Jan 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1988 chevy nova blower switch


check the fuses and the relays to it for 12v. also check the switch.

Oct 06, 2013 | Chevrolet Cars & Trucks

1 Answer

2003 mitsubishi outlander heater fan doesn't work, how might I fix it?


either bad blower motor resistor (least expensive fix to atempt) , or blower motor bad or electrical circuits to motor

Dec 17, 2011 | 2003 Mitsubishi Outlander

2 Answers

Need to know where to check fuse for 1996 ford mustang gt 4.6l fan


In the high current fuse box which is located in the engine compartment. It is a 60 amp fuse and should be marked as fan. In the middle row, second from bottom close to the diagonal cut.

May 17, 2011 | Ford Mustang Cars & Trucks

1 Answer

I am trying to replace the fuel filter on a 1988 chevy nova. Not sure where it is located. Would like to do this myself if it isn't to hard to figure out. Also would like pictures if anyone has any.


the fuel filter on sich cors is usually located in the fuel tank, and can usually be accessed by removing the cover that is under the rear seat cushin.

Mar 26, 2011 | 1988 Chevrolet Nova

1 Answer

1988 bmw 325is heater keeps blowing 30amp fuse, tried to find a short but me heater blower fan isnt working what could be the problem. cant keep a fuse without blowing


More than likely the fan motor its self is short to ground try to unhook the wires to the fan motor and install a new fuse and then turn the fan on with the wires removed and if the fuse is still good you know it is the fan motor its self

Feb 12, 2010 | 1988 BMW 3 Series

1 Answer

Motor shuts down at stop signs and when parked, caarb model 1988 chev Nova


have rhe throttle positioning sensor checked it could be bad not allowing the car ro run right

Jan 19, 2009 | 1988 Chevrolet Nova

3 Answers

1995 Subaru Impreza wagon - heater fan


Mine use to work on high only. It was the switch cylinders, something like that. It was an easy fix. Now my blower motor works intermittently. If I kick it, it turns back on. It is located on the passenger side close to the door side directly above your feet (below the jockey box). Kick straight up. If you need to replace it it is also an easy do-it-yourself repair. Make sure before you go out and replace your blower motor that you check your switch. A lot of repair shops will replace the motor w/o checking the switch, you end up paying for 2 repairs. You can make sure it's not the switch by jumping (bypassing) the switch.You apply jumper wires (not cables) directly to the motor, if the motor turns on you know it's the switch.

Jan 01, 2009 | 1995 Subaru Impreza

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...