- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Chyanne, usually a socket wrench with correct size socket and extension will remove mirror screws. Check the attached video links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info." How To Install Replace Side Rear View Mirror Chevy Lumina 90 94 1AAuto com
You can blame it on your significant other, blame it on the kids or blame it on someone hitting it in the crowded parking lot. Whatever the reason, the side view mirror on your car is broken, missing or hanging by a thread. It's not that hard to replace. With a few common household tools, you can replace it yourself in less than 30 minutes. Forget the body shop or service station; they're going to charge you more in labor than you paid for the part online.
How to Install Side View Mirrors 1.Open the door wide and roll the window all the way down so you don't damage it. 2.Locate the plastic molding on the opposite side of the rear view mirror at the very front corner of the door's window. It'll probably be black plastic triangular-shaped molding, but it may have the same hue as the interior of the vehicle. 3.Gently but firmly pry that triangular molding off with the screwdriver. It's only snapped into place and there's usually a small ridge or lip that seats down into the window cavity. This ridge/lip should be no more than a quarter of an inch into the cavity. Pry it from a couple of spots until it comes free. 4.Locate the wire harness and unplug the mirror if it is an electric-powered mirror.5.Locate the three nuts inside the cavity of the door. There may be some foam plugs or insulation you'll need to move out of the way, but you can replace them after you install the new mirror. 6.Remove the nuts with the ratchet, extension and appropriate-sized socket. Be careful not to drop them into the door cavity. 7.Remove the old mirror and install the new one. 8.Tighten all three nuts. Plug the mirror into the harness if it is a powered one and test it before you close everything upThank you for using FixYa hope this will help your problem and don't forgetto rate me.thanks,Josefina
you can buy just the heated mirror with a ring to clip it onto the existing mount,its just a push fit.simply connect the 2 wires and push it in the MIDDLE of the glass to pop it back on.(or you could steal one from another car......yes i know,thats how she lost hers.is it a left hand for the first offense?)take NO notice of me,in England that's an everyday occurrence. )
You'll have to buy a new one, as side mirrors cannot be repaired. Google "2009 sonata mirror" and find a good price online. Make sure to buy the correct side--RH is passenger side, LH is driver's side. Cost is about $65. If your mirrors are painted, you will also need to have it painted, as they only come in black.
There is a triangular piece of plastic inside the door opposite the mirror. You remove the panel and you'll see 2 bolts. Remove the bolts and unplug the wire connector (if you have electric rear view mirrors) and the mirror will come right off. Installation is reverse.
you need to remove the trim pannel parallel to the mirror on the inside of the vehicle, normally triangle shaped, from there there will be 3-4 nuts or bolts you need to remove, once that is done the mirror will be free to be removed.
You have to CAREFULLY ( probably wise to wear safety goggles ) and with a flat blade screwdriver, pry out ALL the broken mirror glass wearing gloves. Now with the 2 adhesive strips, align mirror glass and adhere to base. Hope this helps