Question about Saturn SL1

2 Answers

Saturn 2000 SL1 - 4 cylinder - won't start - we have changed the crank shaft positioner and car still does not start. There is no power to start the fuel pump. Fuel pump checks out good. Fuel pump not getting sygnal to send fuel to injection ports. NEed ideas!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

Try pulling the engine coolant temp sensor, They often crack not sure why but the ceramic tip cracks makes the car hard to start, or won't start, the car's idle may race while shifting gears, and often smokes. The sensor is on the right side of the engine when looking at it on the head. Easy to change and get too

Posted on Jan 17, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

2000 sl1 saturn will not start but turns over. No inside engine lights are on. It seems like it just will not catch

Posted on Nov 21, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Saturn won't start it cranks but won't turn over. There is no fire between the coil paks and spark plugs but can't figure out why


Someone would need to check for power and ground at the coils and that the timing belt is ok.

Dec 06, 2012 | 2001 Saturn SC

1 Answer

Engine shut off in the middle of the freeway, completely lost power.


check the crank shaft sensor ,check the timing belt . check the coil , check the fuel pump pressure

Sep 08, 2012 | 2003 Saturn VUE

1 Answer

Just dies, sometimes won't start. Changed crank shaft censor, still no good


ihave a 98 grnd chrk lrdo had to replace computer on fire wall, periodicly i spray all electrical connections w/ crs electric contact spray.

Jun 01, 2012 | 2000 Jeep Grand Cherokee

1 Answer

2002 saturn sl won't start, turn over but won't start


If the engine fires up for a second or two with starting fluid then the fuel pump is weak.I would check the fuel pressure and if its not within the specs then replace the pump and filter.

Jan 26, 2012 | 2002 Saturn Sl

1 Answer

1998 Jeep Cherokee -- car won't start. Turns over


have scanned to find problem code to get an idea of what it is. .it may either be the crank or cam sensor, check the crank sensor first. if it is bad it sends wrong timing info to pcm. therefore jeep will not start!! It is either the camshaft or crankshaft positioner. I would check the crank pos. first. Zach Cabot, AR
It is either the camshaft or crankshaft positioner. I would check the crank pos. first. Zach Cabot, AR
It is either the camshaft or crankshaft positioner. I would check the crank pos. first. Zach Cabot, AR

May 31, 2010 | 1998 Jeep Cherokee

1 Answer

97 Jeep Wrangler sport- Cranks, will not


Fuel flow. Either simply, a blocked fuel line (debris / filter / fouled gas) or an electronic issue. Ever let this Jeep run bone dry on gas? Hopefully not, as doing so can draw a lot of crud into your fuel lines from the bottom of the tank. Electronically, if part of the Jeep "brain" has gone bad, there may not be any fuel being routed to the engine. This most likely needs a Jeep mechanic to repair.

May 15, 2010 | 2007 Jeep Wrangler Unlimited Rubicon 2...

2 Answers

Car won't stat


try the starter

Nov 11, 2008 | 1994 Dodge Intrepid

3 Answers

1999 Chevy tahoe will not start


check the crank sensor. no signal from the crank sensor causes a no spark condition. best way to check is to put a scanner on and check for rpms.
the crank sensor is differnt from the cam sensor

Nov 02, 2008 | 1999 Chevrolet Tahoe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

489 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...