Question about 2000 Honda Civic

1 Answer

Black rubber stripping

Can someone tell me how to replace the black rubber stripping on my passenger front door. About 8-12 inches has come off, and the garage wants 85.00 dollars. Is there a cheaper way for me to do this?? Can I buy this Black rubber stripping at an AUTOZONE??

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 107 Answers

You may need to go to the dealer or a salvage yard to get the strip. It is bolted on with 3 or 4, 10 mm nuts inside the door panel and at the front and rear of the door panel. It should take you about an hour to do the repair yourself. Mike

Posted on Jan 06, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Both front power windows don't work. Front switches on the drivers & passenger door are not backlit, but the rear two are.

Check the Black with Violet stripped wire to the master switch for a good ground. Hook a volt meter to battery ground and the other probe to the ground pin at the master switch black ground wire pin in the connector while operating switch. Post results.

Apr 15, 2016 | 2012 Ford Fiesta S 4dr Hatchback 1.6L...

1 Answer

My passenger side front and rear windows,locks and mirror controls dont work

the window control and mirror those wire goes truth the driver door if you open the rubber in the middle of the door wire always get damaged there its when the door is open many time wire move and snap inside that black flexible rubber you have to open that rubber and repair those wire thank for using fixya

Mar 01, 2011 | 2004 Jeep Grand Cherokee

2 Answers

I have a 2008 Chevy Uplander. The rubber moulding

IN most commercial auto storesd they sell a molding spray glue that is OK at best but most body shops have the GOOD STUFF GOOP for rubber molding this is good stuff ask for a little for personal use they may give you the end of a tube of GOOP

Jun 11, 2010 | 2008 Chevrolet Uplander

2 Answers

The windows and driver door lock buttons stop working. but i can lock the door for passenger and backdoors from the passenger door ,but the windows won't go down

Dec, 13/09 Surprisingly, many others have reported the same problem in internet Q & A sites. It happened to me yesterday and, just as many others discovered too, the black wire inside the black cover over the harness between the door panel and the body near the door hinge was completely severed. I removed the cover from the door end and tried to push it back and out of the way to expose both ends of the black wire. It is awkward and would be difficult to work with the end of the black wire coming towards the door. So, I made a 1/2 inch **** in the covering near its end closest to the Jeep body and, using needle nose pliers, fished the black wire up and through the ****. I could then strip 1/2 inch of plastic covering the end of the wire and then twist the stripped end of a 3 inch length of flexible wire (similar to that from a lamp cord) around that black wire and solder the joined wires using a soldering iron, solder and flux. I then wrapped the soldered joint with electrical tape, pushed it back through the **** in the cover and pulled it through the cover to extend conveniently closer to the end of the broken wire coming from the door panel. I stripped the end of that black wire, similarly soldered it to the splicing wire, wrapped that joint with electrical tape and easily replaced the end of the cover over the white plastic cap on the door panel.
It was great to hear the door lock and unlock using my remote opener, to find the windows again opened, interior lights dimmed when the driver's door closed. Don't let service try to sell you new locks, switches etc without first checking for a broken wire in the harness. This do-it-myself project took less than an hour with material already on my workbench. Others have reported dealers have charged as much as $400 for time to check everything else before finding the broken wire. DH Cambridge, ON Canada

Nov 11, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Need Accessories For My '85 Thunderbird Turbo Coupe

you might be able to find them in the ford motorsports catalog... you can get the catalog at the parts counter at any dealership. you might get lucky at a junk yard

Feb 13, 2009 | 1985 Ford Thunderbird

2 Answers

03 impala passenge has FLOOR were it come from

pop the hood and take out the plastic shroud on the passenger side at the firewall. there is a rubber weather stripping that will direct the rain water off the wind shield other wise the rain will fall directly onto the top of the fan motor then run down onto the carpet. i noticed mine when the fan motor iced up and was about an inch thick of ice. all i did was RTV on the weather stripping to redirect the water good luck.

Feb 02, 2009 | 2003 Chevrolet Impala

1 Answer

Escort van weather stripping

It's the rubber piece that runs all the way around the door. Around a inch thinck, squishy, and well, black. It's hard to miss.

Sep 17, 2008 | 2001 Ford Escort ZX2

1 Answer

Replacing Passenger Side Door Moulding

First are you talking about the weather stripping that goes around were the door close into? If this is it, just pull off the old one clean the area good, brake clean works very well. then put the new one in place I recommend some contact cerment here and there to keep it in place so its not flopping all over you. If this is not the black strip please let me know which piece it is.

Aug 21, 2008 | 2000 Honda Civic

17 Answers

Power windows, door locks and mirrors inop.

Sounds familiar - I pulled the rubber boot back and found the black wire was broken. I stripped the wires and put on a couple bullet connectors (terminators) and all is good. Just wish I would have seen this post before I took the door panel off... Oh well...

May 21, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Honda Civic Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides