Question about Dodge Intrepid

2 Answers

Need a 3.5 engine mounting diagram for 97 dodge intrepid and 2.7 engine mounting diagram for 02 dodge intrepid

Posted by on

  • yadayada
    yadayada May 11, 2010

    suggest alldata.com

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 120 Answers

Google 1997 Dodge 3.5 liter Engine Mounting Diagram. Same for the 2002 engine. I guarrantee you will find it.For some strange reason you would'nt call your local Dodge dealer and ask them where you can go to on the web and locate it.

Posted on Jan 06, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Give a picture of a u.joint

Posted on Feb 19, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the ambient temperature sensor located on a 97 Dodge intrepid 3.5?


Here's what it look's like,

1997 Dodge Intrepid 3.5L MFI 6cyl

The Coolant Temperature Sensor is located: Under hood, passenger side, upper engine area, mounted in water outlet.
26176891-km4jbrruc2jiya5sxebyqx44-4-0.jpg

Apr 26, 2016 | Dodge Cars & Trucks

1 Answer

Is a 2005 dodge stratus 2.7l engine mount in a 2002 dodge intrepid that had a 2.7l.


Hey Eric,here are both motor mounts,they are different,here's the 2002 Interpid,Here's the 2005 Stratus.

Jan 20, 2013 | 2002 Dodge Intrepid

1 Answer

I'm replacing timing belt and I need to find out how the timing marks on valve pulleys line up with crank. A diagram or picture would be helpful, This is a 3.5 Engine 97 Dodge Intrepid.


Here is a few diagrams of the timing marks. Be sure that you check the marks after the tensioner has been installed as well because installing the tensioner tends to slightly re-adjust the positions of the cams as it takes up slack on one side.

Be carful when turning the engine (by hand) because these engines are an interferance engine and the valves can contact the pistons. After everything is installed and tight, rotate the engine by hand twice and then recheck that the marks are good to go.

If you haven't replaced the water pump, I highly recommend you do it now.


hotrodshop_1.gifhotrodshop_2.gif

Apr 24, 2011 | 1997 Dodge Intrepid

2 Answers

Signal lights are not working,can you show me in a diagram where the flasher is located on a 1996 intrepid?


The turn signal/hazzard flasher is a small unit ( little black box, 5 prongs ) Located between the fuse box and brake peddle on a braket under the drivers side air conditioning duct. At some point and time in 1995 dodge swiched over in the middle of production so some 95 intrepid and 96 and 97 should all be the same.
ep27

Feb 14, 2011 | 1996 Dodge Intrepid

1 Answer

My 97 dodge intrepid 3.5 liter engine is smoking out the front of the engine not the exhaust. Can you tell me what is the Rear Main Seal and what is the Head Gasket and where to look for the two? If I knew...


The rear main seal is between the engine and transmission. Head gaskets are what seals the block and head of the motor. If the smoke is sweet smelling I would assume it to be a misting coolant leak from a small hole in the radiator. Even though that car is front wheel drive it's mounted longitudinally. Hope this helps.

Jan 20, 2011 | 1997 Dodge Intrepid

1 Answer

HOW TO CHANGE WATERPUMP 1999 INTREPID 2.7


    Prepare the Dodge Intrepid
  1. Step 1 Lay out a drop cloth underneath the Dodge2_bing.gif Intrepid to protect the floor from coolant spills. Designate an area to lay out each part alongside its bolts and connecting hoses and wires. Use a drop cloth here as well, some of the parts will have traces of grease and coolant.
  2. Step 2 Disconnect the negative battery cable, using a screwdriver to unscrew the clamp that secures the cable to the negative (-) post. Pull the cable away from the battery post.
  3. Step 3 Use a jack to elevate the Dodge Intrepid and jack stands to shore up the jack. Release the pressure in the radiator by removing the cap. Take out the drain plug located underneath the radiator. Catch the coolant in a resealable container
  4. Step 4 Use a grease pencil to mark on the timing belt2_bing.gif its position in each pulley before removal. This will save time when reinstalling. If needed, replace the timing belt and skip marking the old one.
    Remove the Damaged Pump
  5. Step 1 Locate the water pump on the Dodge Intrepid. It's mounted on the front of the engine block and connected to the radiator and various other parts through a series of hoses. It's rotated by the timing belt. Study these parts, as you'll have to remove them.
  6. Step 2 Disconnect or remove the parts in front of the water pump, using an adjustable wrench. In the most common Dodge Intrepid engine--the 2.7L--you'll find, in order: the upper radiator crossmember, fan module, accessory drive belts, crankshaft damper, timing cover, timing chain and guide wires.
  7. Step 3 Unbolt the water pump from the engine block, using an adjustable wrench. You may have to use a chisel to gently break the seal between the mount and the pump. Discard both the pump and the bolts.
  8. Step 4 Clean off the mounting area with a shop rag.
    Install the New Pump
  9. Step 1 Inspect the new water pump to ensure it's identical to the old pump and free of any metal splinters or debris.
  10. Step 2 Arrange the new water pump on the mount. You won't need sealant for the o-ring on a Dodge Intrepid. Hold the water pump and o-ring in place as you secure it with the new bolts. Tighten them with a torque wrench to 105 inch pounds torque in any order.
  11. Step 3 Install the timing belt and wires, using the grease pencil marks to guide you in installation. Install the rest of the parts in the order removed. The camshaft must be reconnected with a torque wrench at 125 foot pounds torque.
  12. Step 4 Replace the radiator's drain plug and refill the radiator with the amount and type of coolant specified in your owner's manual. Release the jack and jack stands.
  13. Step 5 Attach the negative battery cable to the post and tighten the screw on the clamp. Crank the Dodge Intrepid's engine and check for leaks. Then, close the hood.

Apr 04, 2010 | 1999 Dodge Intrepid

1 Answer

Could I replace a blown 97 Dodge Intrepid engine for one that works, but is year 94?


That is possible but the computer system in the '97 is much different than the '94. So there will be allot (large list) of parts to change over from the old engine to the new one. A '96 engine would be more compatible than a '94 but still some differences.

Dec 30, 2009 | 1997 Dodge Intrepid

1 Answer

Need a diagram of the firing order for 97 intrepid 3.5l


Looking from the front of the car. the passenger side is cyl 1, 3, 5, and the drivers side is 2, 4, 6. The coil pack front row is, 6,4,2. and the rear row is 3,1,5 The firing order is 123456

Dec 18, 2009 | 1997 Dodge Intrepid

1 Answer

I need a time diagram of an 2002 dodge intrepid,


Hi there;

Here is a picture of the timing marks for the 2002 2.7L intrepid engine.


Hope this helps
Farrout!

Mar 17, 2009 | 2002 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

675 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...