Question about 2002 Oldsmobile Bravada
I have a 2002 Bravada that needs a Right Side Front Fender. Tough to find at a decent price. Does anyone know what else will fit. Maybe Blazer, Trailblazer, yukon? Not sure. Please advise. Thanks Russ
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Engine may stall with the air-conditioner on and or while adding
additional loads to the engine at idle. An example of an addition load
would be turning the steering wheel left or right with the
air-conditioning on. This type of stall usually occurs during idle or
slow parking lot maneuvers. This concern may not set any diagnostic
Clean the throttle body bore and the throttle valve plate using a clean shop towel with GM top engine cleaner, GM P/N 1052626 (Canadian P/N 993026) or AC-Delco Carburetor Tune-Up Conditioner, P/N X66-P, or an equivalent product.
Posted on Jun 09, 2008
For the Oldsmobile Bravada 4.3L V6:
6-----> o.......o <-----5
4-----> o.......o <-----1
2-----> o.......o <-----3
Let me now if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
Posted on Apr 26, 2010
the easiest way to get at them is through the wheel wells. Jack up the side of the vehicle you want to change plugs on to gain some extra clearance in the wheel well area. Remove the inner fender liner (floppy rubber part held to the inner fender with the plastic retainers). You will then be able to see the spark plugs/wires. a spark plug socket, swivel, extension, and ratchet will make the job go by quickly.
The middle cylinder on the drivers side can be a real bear since the steering shaft runs right in front of it. They make a spark plug socket just for this cylinder or you can use a regular spark plug socket, a short wrench, and a pry bar to get it to break loose.
If your not familiar with changing plugs I would not attempt number 5 yourself (the one behind the steering shaft). You could easily break it and end up in a pickle!
Other wise do them one at a time making sure to put the plug wire back on as soon as the new plug is installed to avoid mixing them up.
Posted on Nov 07, 2010
Tips for a great answer:
Jan 02, 2017 | 2002 Oldsmobile Bravada
Sep 20, 2014 | 2002 Oldsmobile Bravada
Jun 28, 2017 | 1997 Oldsmobile Bravada
Dec 26, 2010 | 2002 Oldsmobile Bravada
Nov 07, 2010 | 2002 Oldsmobile Bravada
May 21, 2010 | 2002 Oldsmobile Bravada
Jun 16, 2009 | 2000 Oldsmobile Bravada
Jan 16, 2009 | 1998 Oldsmobile Bravada
48 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: