Question about 2001 Chevrolet Cavalier

1 Answer

Service engine light and abs senor light will not turn off

Both indicators will not turn off,and when slippery roads come up the trac control indicator light does not come on anymore, I had both abs sensors replaced.

Posted by on

  • j_campbell Jan 09, 2009

    Same Exact PRoblem

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 61 Answers

Some times the wheel speed sensor will go out on either side. This will make the A.B.S. light come on. But I dont see why the service engine light would come on. I would segest changing all wheel speed sensors and take it for a drive. The A.B.S. light should go out. If the service engine light dose not go out your local auto parts stors can run a diagnostics test to tell you what the light is on for.

Please contact me if your problem presists.

Thanks, Charlie

Posted on Feb 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Engine shuts off after driving 45 mim when trying to park in reverse.but 15 min before this engine and slippery road icon comes on when road is dry and 95 degrees outside


I think you have Ground problem.
The slippery road light is part of the ABS system. one or more ABS sensors reading is much greater or lower then VSS (speed) sensor.
Same time the engine quit is indication for lose ground.Inspect your ground connection , if you have broken engine mount will pull the wire and kill the engine and ABS system.
Good luck

Aug 17, 2015 | 2008 Toyota Highlander

2 Answers

Abs light and esp light are on in my pegoet 308


If any of four abs sensors is not working then abs light comes up and subsequently affects car's stability (esp). OBD diagnostic scanner will find out that which sensor is causing it. If all sensors are fine then most probably there is a problem with your abs/esp unit in engine bay.
PEUGEOT announced a problem with the 308 vehicles and it has been identified that the operation of the ABS/ESP braking unit may be affected by the ingress of water. Previously, recall are announced to be affected vehicles to reinforce the resistance of the ABS/ESP unit to water.

Feb 11, 2015 | 2008 Peugeot 308 1.6

2 Answers

Esp and abs light on in 2009 ford transit how do i eliminate them


Anti lock brake system light comes up when there is issue with car brake systems.It can be low brake fluid or faulty ABS fuse or its issue with brake system or assembly.Your vehicles brake system needs inspection.

To troubleshoot these issue,i suggest you to refer the help links provided below.There are direct links with accurate solution,for these specif issue.

Click the link below and follow the procedure:------

All types of ABS LIGHT / brake problems and repairs

http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

-------------------


ABS light stays on but brakes work fine?

http://howtobyme.blogspot.com/2011/11/abs-light-stays-on-but-brakes-work-fine.html

----------------
VCS and ABS lights go on and off intermittently on Lexus? http://howtobyme.blogspot.com/2011/11/vcs-and-abs-lights-go-on-and-off.html
-------------
The ABS and Traction Control Lights stays ON dash of car? http://schematicsdiagram.blogspot.com/2011/06/abs-and-traction-control-lights-stays.html

------------- ABS & Brake lights warning indicator steady on dash and speedometer not working for Dodge Ram?

http://howtobyme.blogspot.com/2011/11/abs-brake-lights-warning-indicator.html

-----------------------
Battery Light and ABS Light on Dash http://whoisbyme.blogspot.in/2012/07/battery-light-and-abs-light-on-dash.html

-------------
Sometimes ABS light comes on while Driving? http://howtobyme.blogspot.com/2011/12/sometimes-abs-light-comes-on-while.html
----------- How Anti-Lock Brakes Work?

http://technoanswers.blogspot.com/2011/11/how-anti-lock-brakes-work.html

-------------
Brake System Troubleshooting? http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

-------------
Anti-lock brake light stays on all the time?

http://technoanswers.blogspot.com/2012/01/anti-lock-brake-light-stays-on-all-time.html

-------------------

ABS light comes on and Car makes Grinding noise?

http://repairhelpcenter.blogspot.com/2012/01/abs-light-comes-on-and-car-makes.html

---------------
ABS trouble codes for all models?

http://repairhelpcenter.blogspot.com/2011/11/abs-trouble-codes-for-all-1994-00-acura.html
------------

2008 Toyota Highlander: ABS warning light Blinking and OBD Error codes Coming?

http://technoanswers.blogspot.in/2012/05/2008-toyota-highlander-abs-warning.html

--------------


2003 Lexus ES: VSC, TRAC OFF, ABS lights ON?

http://technoanswers.blogspot.in/2012/04/2003-lexus-es-vsc-trac-off-abs-lights.html

----------------
2008 Toyota Highlander Hybrid: Warning Lights Abs, Vsc & Brake Are On?

http://technoanswers.blogspot.in/2012/04/2008-toyota-highlander-hybrid-warning.html

-------------


ABS & Brake warning lights remains steady on dash? http://schematicsdiagram.blogspot.com/2011/12/abs-brake-warning-lights-remains-steady.html



------------
Can I drive the car without ABS fuse connected? http://schematicsdiagram.blogspot.in/2012/02/can-i-drive-car-without-abs-fuse.html

-----------
Where is ABS/TCS module located on 2005 Cadillac Deville

http://schematicsdiagram.blogspot.com/2011/12/where-is-abstcs-module-located-on-2005.html

------------------
ABS motor keeps running? http://schematicsdiagram.blogspot.com/2012/01/abs-motor-keeps-running.html

------------
When the car stops, abs pump turns ON? http://howtobyme.blogspot.com/2011/12/when-car-stopsabs-pump-turns-on.html

-----------
Replacing ABS unit on Buick Century? http://technoanswers.blogspot.in/2012/02/replacing-abs-unit-on-buick-century.html

----------------
2008 Toyota Tacoma: ABS causes Brake pedal fade? http://technoanswers.blogspot.in/2012/04/2008-toyota-tacoma-abs-causes-brake.html
-------------- Toyota Camry: Premature ABS Actuation? http://technoanswers.blogspot.in/2012/04/toyota-camry-premature-abs-actuation.html

-----------

How to replace ABS Modulator Control Unit on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-abs-modulator-control.html

----------------


How to replace ABS Pump Assembly on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-abs-pump-assembly-on.html

-----------


How to remove ABS Accumulator on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-abs-accumulator-on-acura.html

---------


How to remove ABS Control Unit on Acura Integra?
http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-abs-control-unit-on-acura.html

------------
These details will help.
Thanks.

Nov 24, 2012 | Ford Transit Connect Cars & Trucks

2 Answers

Anti-lock system light on


Anti-Lock Braking System (ABS)
Purpose Anti-lock brake systems (ABS) - generally also referred to as anti-lock
systems (ALS) - are designed to prevent the vehicle wheels from locking
as a result of the service brake being applied with too much force, especially
on slippery road surfaces.
The idea is to maintain cornering forces on braked wheels to ensure that
the vehicle or vehicle combination retains its driving stability and manoeuvrability
as far as physically possible. The available power transmission
or grip between tyres and carriageway should also be utilised as
far as possible to minimise the braking distance and maximise vehicle
deceleration.
Why ABS? Although today commercial vehicle brakes are designed to a very high
technical standard, braking on slippery roads often results in potentially
dangerous situations. During full or even partial braking on a slippery
road it may no longer be possible to fully transfer the braking force onto
the road due to the low coefficient of friction (friction coefficient (k)) between
the tyres and the carriageway. The braking force is excessive and
the wheels lock up. Locked wheels no longer provide any grip on the
road and are almost incapable of transferring any cornering forces
(steering and tracking forces). This often has dangerous consequences:
- The vehicle becomes unsteerable
- The vehicle breaks away in spite of countersteering, and starts to
swerve.
- The braking distance is significantly increased
- Tractor-trailer combinations or semitrailer trains may break away or
jackknife.
Load sensing valve influence On dry roads today's load sensing valves (ALB) alone are often capable
of preventing the wheels from locking if the vehicle is unladen; they also
help the driver to effectively grade the braking process on wet road surfaces,
but they are unable to prevent locking as such (no slip monitoring).
In addition, they are unable to counteract any overreactions on the
part of the driver, or any variances in frictional or adhesion coefficients
which may apply to different sides of the vehicle, or indeed to its different
axles (?-split road surfaces).
Benefits of ABS: Only the Anti-Lock Brake System (ABS)
- guarantees stable braking characteristics on all road surfaces.
- maintains steerability and generally reduces the braking distance
- prevents vehicle combinations from jackknifing
- reduces tyre wear.
Limits of ABS Although ABS is an effective safety device, it can not suspend the limits
defined by driving physics. Even a vehicle fitted with ABS will become
uncontrollable if driven too fast around a corner.
So ABS is not a licence for a maladjusted style of driving or failure to observe
the correct safety distance.
4
ABS Training Anti-Slip Regulation (ASR)
Anti-Slip Regulation (ASR)
Why ASR? Increasing the engine output (accelerating) on a slippery road surface
can easily lead to the maximum adhesion on one or all powered wheels
being exceeded causing them to spin, especially if the vehicle is unladen
or partially laden.
Spinning wheels when driving off or accelerating represent a safety risk
just like locked wheel do when braking.
Reasons - Wheels that spin transfer just as little cornering force as locked
wheels.
- They also no longer transfer any tractive power onto the road.
Consequences - Vehicles that do not move or get stuck.
- Vehicles that can no longer be steered, jackknife on uphill uphill
gradients, or swerve in corners.
Benefits of ASR ASR prevents the powered wheel from spinning and provides the following
benefits:
- Tractive power and cornering forces are maintained.
- Stable driving behaviour is ensured when moving off, accelerating
and negotiating corners on slippery roads.
- The indicator lamp (if installed) is used to warn the driver of slippery
road conditions.
- Tyre wear is reduced to a minimum, and the motor vehicle's drive
train protected
- The risk of accidents is further reduced.
ASR and ABS: ASR represents a worthwhile addition to an ABS-controlled braking system.
All that is required to turn ABS control into full ABS/ASR control is
an ECU with the additional ASR function and a few additional components
for controlling the differential brake and the engine. This why ASR
is only available in combination with ABS.
Even a differential lock for off-road use and ASR do not exclude but complement
each other.
Limits of ASR The traction capacity of an all-wheel driven commercial vehicle can not
be achieved by a motor vehicle with only one driving axle - not even with
optimal ASR.

anti-lock-system-light-vi1ay411tmzjz03ru4fkmxgj-5-0.jpg

anti-lock-system-light-vi1ay411tmzjz03ru4fkmxgj-5-2.jpg

Feb 28, 2012 | 1994 Cadillac DeVille

1 Answer

I have a 97 lumina an my trac light just came on and now my brakes are really hard to stop what could be wrong??


HAVE VECHICLE CODE SCAN SOUND LIKE FAULTY WHEEL SPEED SENSOR.WHEN YOU SEE LOW TRAC LIGHT YOU ABS BRAKE SYSTEM IS ADJUSTING BRAKE PRESSURE TO KEEP CAR FROM SKIDDING LIKE WHEN YOU ARE ON SLIPPERY WET ROADS OR ICE. IF YOU SEE LOW TRAC LIGHT YOU HAVE A PROBLEM IN ABS BRAKE AND TRACTION CONTROL SYSTEM.

Aug 04, 2011 | Chevrolet Lumina Cars & Trucks

2 Answers

My abs warrning light is showing on my bmw 316 and does not go out..


On vehicles equipped with antilock brakes (ABS), a second warning light is provided to warn if a problem occurs within the ABS system. The ABS lamp comes on when the ignition is turned on for a bulb check, then goes out after the engine starts. If the ABS warning light remains on or comes on while driving, it indicates a fault has occurred in the ABS system.

What happens next depends on the nature of the fault. On most applications, the ABS system disables itself if the ABS warning light comes on and remains on. This should have no effect on normal braking. Even so, ABS will NOT be available in an emergency situation or when braking on a wet or slick surface.

CAUTION: If the brake warning light also comes on and remains on while the ABS warning light it on, it signals a serious problem. Your vehicle may not be safe to drive. The brakes and ABS system should be inspected immediately to determine the nature of the problem!

If the ABS light comes on momentarily then goes out, the nature of the problem is usually minor and the ABS system usually remains fully operational. Some vehicle manufacturers call this kind of fault a "nonlatching" fault (meaning it isn't serious enough to disable the ABS system).

Regardless of the type of fault that occurred to trigger the ABS warning lamp, a special "code" is recorded in the ABS module's memory to aid in diagnosing the problem. On some vehicles this code can be retrieved by putting the ABS system into a special diagnostic mode. The code is then flashed out through the ABS warning lamp. The code number refers to a diagnostic chart in a service manual that must be followed to pinpoint the faulty component. On other applications, a special "scan tool" must be plugged into the vehicle's diagnostic connector to read out the fault code.

Jun 07, 2011 | 1995 BMW 3 Series

2 Answers

Olds intrigue warning lights on...


It is a sign that you either have a bad wheel bearing or 1 off your speed censors on 1 of the tires is bad, I just had this problem with my olds alero, but it was a wheel bearing that needed replaced.

Jan 24, 2010 | 2001 Oldsmobile Intrigue

2 Answers

ABS, brake, trac control, service engine soon light came.


I'm sorry to say that you will need to see a dealer or repair shop so they scan your ABS for trouble codes first and then find your problem.

Jul 24, 2009 | 2000 Oldsmobile Intrigue

2 Answers

ESP ABS LIGHT ON .AS WELL MY BREAK LIGHT FLASHING. AUDI A4 2 LITRE


i have seen this many times on VW passats which are on the same platform. You may need a new abs control unit. if the abs control unit cannot be scanned by a computer, check all fuses. if abs contol unit is needed, there is aftermarket places that can rebuild them, i recommend factory unit.

Jun 15, 2009 | 2001 Audi A4

1 Answer

What does trac off light refer to? service engine and trac off light comes on.


Trac is the control that doesnt let your tires spin when they are not making contact with the road. Just by having your emergency brake on will light up the trac light. It also come on with your abs. If you driving on a slick road and you jam on your brakes and the tires slide a little mine will say low track on my car.

Aug 11, 2008 | 1997 Buick Century

Not finding what you are looking for?
2001 Chevrolet Cavalier Logo

506 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...