Question about Cars & Trucks

Open Question

How to change fan belts on thermo king sb210 - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHRE IS THE FAN FUSEE IN A 1.3 TOYOTA TAZZ


you changed the thermo switch and relays and it didnt fix it
did you test the fan motor itself

the fuse box cover should have a fuse layout diagram
engine cooling fan

look for a 30 amp fuse

they usually near the fan relays

is the air con cooling fan working with air con on
and engine running




26238251-04wei2fenntfkeahz4fn3g0j-5-0.jpgwhre-fan-fusee-in-1-3-toyota-tazz#sln-36379873-rmi0ll110lgwm2wbdtthe4rs-3-2_0.jpg

Jul 15, 2016 | Toyota Cars & Trucks

1 Answer

When my unit won't start and has a code 20


If that refrig trailer is loaded then you need to call thermo king for help ASAP. You don't want to loose the load.

Retired VP OPerations Trucking. Mike

Feb 12, 2016 | Cars & Trucks

1 Answer

My car is over heating Nissan hardbody zd30 engine?


thermo fan not cutting in /clutch fan faulty.
headgasket blowen...check for bubbles in the radiator if lots of bubbles then its a headgasket /cylinderhead problem

Nov 20, 2014 | Nissan Pickup Cars & Trucks

1 Answer

I have a thermo king md-II max its smoking alot but it is still cooling and it running a little low what might be the problem


Piston rings, or air filter. If it is low on refrigerant, you will need to top it up. You may also have a leak, which you need to find. Releasing refrigerant to the atmosphere is illegal. When was the last service? 1500 hours with normal filters/oil/belts or 3000 with EMI filters/oil/belts

Aug 30, 2014 | Cars & Trucks

1 Answer

I have a thermo king tripac and I'm having issues


Hi there, do you have the diesel fired heater unit? have you checked the inline filter and also the injector nozzle inside the burner, we had one come in that was slightly blocked and wouldn't fire up! i have a brand new complete heater unit if you need any parts.

Dec 03, 2012 | Cars & Trucks

1 Answer

My 2001 jeep cherokee has no mechanical fan but does have the electrical fan,do I need the mechanical fan?


you shouldnt have both. ever you have the thermo fan on the front of the radiator motor side or you have a viscous hub fan coming from a pulley driven by the belt. and ontop of that you should have a little electric thermo fan for your A/C on the other side of the radiator.

Feb 03, 2011 | 2001 Jeep Grand Cherokee

1 Answer

2001 kia sportage need to get info on how to change the timing belt, 2.0 motor forward facing motor, needs power steering replaced, timing belt.


Hi there,

Below are the steps..

Disconnect the negative battery cable. Remove the two fresh air duct mounting bolts on the radiator. Loosen the fresh air duct clamp at the intake housing. Remove the hose at the resonance chamber. Remove the frech air duct. 2bea4d1.jpg Remove the five cooling fan shroud bolts. ab00c68.jpg Remove the four thermo-modulated fan nuts. Remove the four thermo-modulated fan cooling fan shroud at the same time. 289c5ca.jpg Loosen the two generator mounting bolts(A and B). 2a96c03.jpg Loosen the generator drive belt from the generator by loosening the adjusting bolt(C). Remove the generator drive belt. Remove the fan pulley. Remove the four splash guard mounting bolts and splash guard. f912ce0.jpg Loosen the A/C idler puller nut(A). c0690b5.jpg Remove the A/C drive belt by loosening the adjusting bolt. Loosen the power steering pump lock bolt and mounting bolt. 843d3b3.jpg Remove the power steering belt. Remove five bolts and the upper timing belt cover. Refer to Timing Belt. Remove two bolts and the lower timing cover. Refer to Timing Belt. Loosen the tensioner lock bolt and pivot the tensionder pulley outward to remove the tension from the timing belt, then re-tighten the tensioner lock bolt. 7ca4ca0.jpg NOTE: Tightening Torque : 27-38ft·lbs(37-52N·m) Mark the timing belt rotation for proper reinstallation if it reused. Remove the timing belt. Be careful not to allow oil grease on the belt. c5d4c02.jpg Regards, Jeep Brainy

Sep 16, 2009 | 2001 Kia Sportage

1 Answer

Loud fan noise near radiator when idling


It may be the thermo fans that are on the car.They cut in and out especially if the air/con is on.The car will have a belt driven fan but the electric thermo fan,will cut in and out as it is needed creating a highspeed fan noise.Hope this is the problem and helps you.

Aug 24, 2009 | 2004 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...