Question about 2006 Toyota Solara

Open Question

06 serpentine belt removal on an 06 solara - 2006 Toyota Solara

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

knotbeerdan
  • 413 Answers

SOURCE: 2004 Toyota Camry Solara- Serpentine Belt Instalation Instructions

When your hood is open look on the underside of the hood or on the top crossmember. around the top of the radiator. and there should be a little white sticker that shows how to route the belt.

Posted on Dec 29, 2008

ZJLimited
  • 17970 Answers

SOURCE: need a 2003 Toyota Solara

1f23fb1.jpg

Fig. Accessory drive belt routing-3.0L (1MZ-FE) engine


43348a8.jpg

Fig. Accessory drive belt routing-3.5L (2GR-FE) engine

Also, here can find additional information: 2003_toyota_camry_solara_drive_belt_routing_diagram

Hope helps.

Posted on Aug 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm having problems with putting serpentine belt back on. I have a 2005 toyota camry Le 2.4 liter and I can't use a breaker bar becuase I have a top motor over the tensioner. Show release the...


You will need to remove the upper engine mount, which i like to do, or do the job from under the car, which also usually requires the moumt to be removed. Let me know if you need anymore asistance as i know Toyota's to be a handful sometimes.

Aug 09, 2011 | 2005 Toyota Camry Solara

1 Answer

Trying to replace my serpentine belt on toyota solara but last bolt is hitting the frame by 1/4". is there anyway i can get it out and the new one in without having to lift the engine?


if you are talking about that you are replacing the serpentine belt tensioner then the only way that i know is that you have to jack the engine up to get the bolt to clear the frame......been working on toyota and lexus for 25 yrs and if i can assist you any other way let me know.......let me and fixya know how i did and a thumbs up........good luck......thanks.......if you are only putting the belt on then there is a nut that is made to the tensioner that you will need to put a socket on and a long ratchet and you have to pull pretty hard to release the tension to take the belt off or to put it on.......please let me know if i can help any further and give me more info on what you need..........

Jun 21, 2011 | 2004 Toyota Solara

2 Answers

Change serpentine belt on 06 sienna


  1. 1 Check to ensure the Sienna's engine is cold, then make sure the Sienna is in park, the ignition is in the off position and the key is removed from the ignition to prevent any possibility of the engine engaging during the serpentine belt replacement.
  2. 2 Open the hood and locate the serpentine belt routing diagram sticker on the side of the engine casing. Study it for a moment before removing the existing belt. It is essential the new belt be installed exactly as the diagram indicates.
  3. 3 Find the tensioner pulley, the main pulley that controls the serpentine belt, and fit a 1/2-inch socket wrench over the self-tensioner on the outside of the pulley.
  4. 4 Pull the wrench to the left to move the pulley forward, which loosens the belt, then remove the belt.
  5. 5 Compare the old serpentine belt with the new, replacement belt for length, width and number of grooves on the belt's underside. Be certain the replacement belt is the right part.
  6. 6 Fit the new belt on to each pulley according to the serpentine belt routing diagram on the manufacturer's sticker, or according to the drawing made prior to removing the old belt. Fit the new belt on to the tensioner pulley last, again applying pressure on the pulley's self-tensioner with the half-inch socket wrench to loosen the pulley.
  7. 7 Release the pressure on the self tensioner and allow the tensioner pulley to ease back into place, thereby tightening the new serpentine belt with the appropriate tension.
  8. 8 Remove the wrench and close the hood.
Thank you and good luck,
Lee

Aug 26, 2010 | 2006 Toyota Sienna

1 Answer

What is the approximate price to change the alternator belt on a 2005 solara, if i went to the dealership


The dealer will charge you 3 times what it should be, and the small shop on the corner about $50. Unless it is a serpentine belt, then the belt will be $50. Hope this helps.

Apr 20, 2010 | 2005 Toyota Camry Solara

1 Answer

How to replace the serpentine belt on a 06 A6 4.2?


I think you mean Tining Belt, BIG Difference. Sounds nornmal. Find a shop that does Euro Imports to compare prices, use only OEM parts.

Dec 30, 2009 | 2000 Audi A6

1 Answer

How to install serptine belt fir 2002 solara


First, make sure there is a diagram under your hood that shows the belt diagram so you can put it on correctly. If a diagram isn't under the hood, use this link to get a copy of the diagram.
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S6006

Now, follwo this link to a video on how to change the serpentine belt...
http://www.wonderhowto.com/how-to/video/how-to-inspect-and-replace-your-car-s-serpentine-belt-267229/

Good luck.

Oct 18, 2009 | 2003 Toyota Camry

1 Answer

How to replace serpentine belt on toyota matrix 2003


2003–06 1zz-FE Engine & 2003 2zz-FE Engine
  1. Disconnect the negative battery cable.
  2. Use a wrench and rotate the belt tensioner clockwise.
f81e9e7.gif
Use a wrench and rotate the belt tensioner clockwise—2003–06 1ZZ-FE engine and 2003 2ZZ-FE engine

  1. With pressure applied to the wrench, and tension relieved from the drive belt, remove the accessory drive belt.
To install:
  1. Raise and safely support the vehicle.
  2. Remove the right side lower engine splash shield.
  3. Properly route and install the accessory drive belt onto the drive pulleys.
  4. Use a wrench and rotate the belt tensioner clockwise.
bf314d5.gif
Use a wrench and rotate the belt tensioner clockwise.

  1. With pressure applied to the wrench, install the accessory drive belt.
  2. With the accessory drive belt installed properly, release the belt tensioner.
  3. Install the right side lower engine splash shield.
  4. Connect the negative battery cable. Tighten the battery cable bolt to 11 ft. lbs. (15 Nm).

Oct 11, 2009 | 2003 Toyota Matrix

1 Answer

Trying to change both serpentine belts on a 2000 toyota camry. cannot locate pivot bolt to change the power steering belt. can you help?


Their should be a diagram in the front of the engine compartment. Their will definitely be a diagram in the owners manual.

Jan 11, 2009 | 2003 Toyota Camry Solara

1 Answer

2004 Toyota Camry Solara- Serpentine Belt Instalation Instructions


When your hood is open look on the underside of the hood or on the top crossmember. around the top of the radiator. and there should be a little white sticker that shows how to route the belt.

Sep 29, 2008 | 2004 Toyota Camry

Not finding what you are looking for?
2006 Toyota Solara Logo

Related Topics:

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...