Question about 2005 Ford Taurus

Open Question

2005 ford taurus transmission solenoid - 2005 Ford Taurus

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 14 Answers

SOURCE: taurus tranny problem

There are three of them. All under the side pan covering the valve body.

Posted on Jul 26, 2008

  • 1 Answer

SOURCE: ford taurus will not shift from low gear

I have a 2001 ford taurus and i have transmission fluid leaking on ground when it runs. i was driving it today and it would not shift gears. Then when i got home i saw transmission fuild in the ground.

Posted on Mar 08, 2009

emissionwiz
  • 75814 Answers

SOURCE: How do I change the transmission solenoid on my

the solenoid pack is located on the valve body inside the transmission, u must remove the trans pan to access it for replacement

Posted on Feb 05, 2010

Testimonial: "Very helpful. Thanks!"

  • 123 Answers

SOURCE: 2005 Taurus: What is the oil capacity in my 2005 Ford Taurus?...

4.5 quarts with filter of 20w50 oil

Posted on May 29, 2010

  • 4 Answers

SOURCE: Ford Taurus Transmission Removal step by step

its quite a job, but hopefully this helps you, i have already replaced my gfs transmission on her 2000 taurus once and i need to do it again, ford really sucked on these transmissions. if you jack up the car high enough to give you about 21/2 feet of pllay under the car it would be good, take the tires off, take the calipers off, disc brakes, nut on axles, rack and pinion to the spindle, shocks, everything that will get in the way when you bring down the bottom frame. under the hood, i take out the intake air box and battery with battery plate so it gives you room to disconnect the shift cable and all connections that need to be disconnected. now remember when you bring down this frame its going to come down with motor and tranny, so you gotta either get an engine hoist or put some blocks under the mottor,take the starter off, take the torque converter cover off from the bottom its right in the middle of the motor and tranny 2 screws, there are 4 nuts honding the torque converter in there so you will probably need the help of someone to turn the main pulley as you look for those 4 nuts, take all bolts holding the transmission in place, take axles off, 2 big nuts for the rack and pinion, 2 nuts for motor mounts (if you are under the car they are holding onto the squared frame, use a engine hoist to hold on to the motor and use a jack under to hold the tranny, now this is the tricky part, you might want to use a second jack to hold the frame, as you take off the 4 main bolts for the bottom frame leave one so it dosent come crashing down, if you have everything secure, take the last bolt off as you have the jack holding it in the front in place, when you take it off then bring the jack down slowly making sure you got all bolts and connections, once that is down make sure all bolts and connections are disconnected from transmission, there are 2 metal hoses that go into the front of the transmission that are a pain to get out, squeeze the 2 little plastic ears that it has as you try to pull the tip out, play with it cause sometimes they are a pain, once you have that, double check everything and you can wiggle the tranny to make sure its loose off the motor if it is, take precaution and bring the jack down slow to bring your transmition down. hope it helps if you know some basics of mechanical.

Posted on Jul 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the cost of a 2005 ford taurus transmission


Common failure according to this page. Cost is just over 2 grand!

2005 Ford Taurus Transmission Failure

Nov 08, 2016 | Ford Cars & Trucks

1 Answer

Where is the 1994 ford taurus shift solenoid located ?


Usually the forward drum inside the transmission has broken, so you only have first gear. You will need to either replace it, or have your transmission rebuilt

Aug 11, 2014 | 1994 Ford Taurus

2 Answers

Why won't a 2005 Taurus with a fax transmission shift into 3rd gear?


run the fault codes and check for a servo/solenoid fault or a faulty TCM module.

Jul 16, 2014 | 2005 Ford Taurus 3.0

1 Answer

Location of 02 for taurus shift solenoid


Inside the transmission on valve body.

Feb 18, 2013 | 2002 Ford Taurus

1 Answer

My 2005 Taurus won't Back Up. Reverse Not working at all


Thats what they do Sir/Mam-- Wont be too very long till Drive goes Needs Transmission

Jan 13, 2009 | 2005 Ford Taurus

1 Answer

Ford taurus will not shift from low gear


I have a 2001 ford taurus and i have transmission fluid leaking on ground when it runs. i was driving it today and it would not shift gears. Then when i got home i saw transmission fuild in the ground.

Jan 08, 2009 | 2000 Ford Taurus

1 Answer

Ford taurus


you might have to replace the solenoid also called swtch, and service the transmission since any durt in the system will cause the solenoids to stuck, but the solenoids are inside the transmission

Jun 17, 2008 | 1999 Ford Taurus

Not finding what you are looking for?
2005 Ford Taurus Logo

Related Topics:

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...