Question about 1999 Daewoo Matiz
I need tappet clearances for dawoo matiz please
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same problem on my wifes car only a few weeks ago and the problem was blocked fiters in the pumps for the front and back washers. You'll need to remove the drivers front wheel and plastic wheel arch cover. The pumps will pull out of the reservoir, use a container to catch the water, The filter is just a piece of wire mesh which can be eased out of the pump for cleaning
Posted on Apr 29, 2010
Yes it can be done. I removed the battery and tray and gearbox mount only then was able to wriggle the motor out (after removing sarter,alternator,power steering and air con compressor). Also removing the plastic cover near the front pulley helped. Need small hands! Good luck!
Posted on Jun 11, 2009
You have most likely crossed the leads try putting them back on in order, since it occosional pops it tells me you crossed the wires, and if it ran before this then that is your problem, you also could have broken the leads and would need to test with an ohm meter to see if you have.
Posted on Jul 06, 2010
Tips for a great answer:
Jan 26, 2016 | Cars & Trucks
Jan 24, 2015 | 2006 Tata Indica LSi
Sep 06, 2012 | Mitsubishi Pickup Cars & Trucks
Aug 21, 2012 | Cars & Trucks
Apr 05, 2011 | Ford Mustang Cars & Trucks
Feb 14, 2011 | Ford Escort Cars & Trucks
Mar 25, 2010 | 1988 Mitsubishi Cargo
Nov 02, 2009 | Nissan Sentra Cars & Trucks
Feb 22, 2009 | 1994 Honda Prelude
354 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: