Question about Chevrolet Malibu

1 Answer

It's the belt thing again

Hey I appreciate this help. I am a "woman" that try to fix my own car, cause men are always trying to get me for money. I have a 1977 chevelle. I have had this car for "8 years". I have had it so long the only work done was a transmission work and brakes. It even out last my "2002" car. Hopefully you can help me find a "diagram" for my chevy, I don't see one on my car panel at all. This is for my belt system. I have found 3 different belts going to all that is supposed to go, but this belt here, it came from the a/c compressor. Thanx

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 740 Answers

This belt should be going from the compressor to the crankshaft pulley. On some production dates its a double belt on the ac compressor. I really don't have a diagram of this vehicle so I am not 100% sure but look and see if the Ac has a double belt pulley. Good Luck contact if you need more help.

Posted on Jan 05, 2009

  • O Mclean Jan 05, 2009

    Is this a chevelle I'm only seeing the Chevette in that year. I'm trying to get that info for you..

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2011 dodge caravan and it is making a squealing noise when I turn it on and go. It stops when I break or stop the van. What could be wrong and is there a simple fix I can do at home?


If the noise is coming from the engine area could be your serpentine belt that is dirty or may be a pulley or the belt tensioner. if someone can help you. You could run a tooth brush from behind the serpentine belt to try to get any dirt out of it. you may want to check the belt while you are in there that is not showing any cracking if so you may want to replace it to prevent additional damages. if the cleaning of the belt does not work again it may be your belt tensioner. you can also try turning your a/c off or on to check if the noise goes off. that may be also cause of the A/c compressor clutch going out. will recommend taking your car to a professional technician. again may sound simple but you don't want to get stranded if your belt brakes and it will be more expensive having to tow the vehicle to a shop and possible causes of the vehicle overheating. Have a friend or some one do the brush for you and were some safety glasses. always think about safety first, trying to fix everything but your self may not always work and you may get hurt. good luck!

Nov 06, 2013 | Cars & Trucks

2 Answers

Help, My airconditioner will not go to cold and always blows out hot air


Open the hood and find the "fix A/C button" and push it. There you go.

On the other hand your car is nearing 10 and that is when things begin to go wrong. You need to find a shop which does mainly heating and A/C work on cars, these are easily found in the yellow pages. Before you go dumping money trying to recharge it, someone who knows what they are doing needs to locate and replace any defective or leaking parts, then recharge the system.

Aug 11, 2011 | 2003 Mitsubishi Outlander

2 Answers

Was driving Peugeot partner 19D yesterday when the power assisted steering seemed to stop working. There was lots of resistance when turning. PAS fluid level is ok. Continued driving then symbol for...


Hi sounds like you have a belt snapped causing the power sterring pump to fail and stopping the battery recieving a charge from the alternator, should be an easy fix with replacement belt
Hope this helps
Steve

Mar 03, 2011 | 2006 Peugeot 604

1 Answer

What is the recommended mileage for replacing the timing belt on at 1994 Toyota Camry 2200 4cly Thank You Frank


Hey Frank, take your front protection cover off and check your belt. Look for cracks and tears, also missing teeth. It is usually recommended around 100,000, but they can last longer. If the belt looks good, don't change it. If money is not an issue, then go ahead and change it if your close or over 100,000. They can last awhile but if it is over that and money is not a problem, change it. If it breaks, your stranded and it can cause engine damage. Hope this helps. Best wishes.

Feb 10, 2011 | 1994 Toyota Camry

2 Answers

I HAVE A 99 GMC YUKON, AND IN THE PAST COUPLE YEARS THE SECURITY LIGHT SOMETIMES COMES ON AND WONT LET ME START MY TRUCK. I HAVE TO WAIT TEN MINUTES UNTIL IT STOPS BLINKING TURN THE KEY OFF AND TRY IT...


This is the relearn process if you replace a key and don`t have a scan tool.You have to get the codes from the Theft Deterrent module to see what could be causing the problem.If your key is worn out it could cause this problem.Try using a different key if you have one.The dealership parts department has a tool to check the keys.Usually done at no charge.Only takes seconds to do.Could also be a bad ignition cylinder.That`s why you need the codes.Other wise you are just spending money and buying parts that you don`t need.Let me know what codes you get and I`ll be glad to help you out.Good luck.

Dec 12, 2010 | 1999 GMC Yukon

2 Answers

Airbag warning light is on in my bmw 318i 2004 what is wrong is it going to cost a lot of money to fix


prob the passenger occupancy seat sensor mat, common fault on the e46, happened to my 320ci o4 plate, around 200 pound to fix, but could go wrong again.

Apr 10, 2010 | 2004 BMW 3 Series

2 Answers

I need a manual for my 1995 eagle summit so i can fix little problems like change the spark plugs and me being a woman everyone wants to charge me and arm and leg


well for spark plugs it is pretty staight forward you dont need a manual but you can pick one up (proally) at an auto parts stor oreily autozone advanced...etc

Oct 26, 2009 | 1995 Eagle Summit

1 Answer

1997 Toyota Celica - Codes P0133 & P0401


well if its poping an o2 code try a couple things before you start spending money. when it starts up listen for a rattle from the cattilitic convertor. if you have a bad rattle replace the cat that might solve both codes if no rattle replace the o2 sensor, it might just be that. hope this helps

Apr 09, 2009 | 1999 Saturn SL

3 Answers

Out of sync folding mirrors


Try removing the mirror fuse for a few mins. I've had this problem twice.

Jan 20, 2009 | 2005 Land Rover Range Rover

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...