Question about 2008 Chrysler Town & Country
The electronic throttle control light came on and vehichle will not start
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It is located on the back side of the underdash fuse box (junction block). You remove the lower steering column cover and knee blocker reinforcement. Then remove two plugs from the bottom of the bcm.
Remove the bolts holding the junction block to dash panel mounting bracket. Remove the junction block from the bracket. Remove screws holding the bcm to the jb. Slide the bcm downward to disengage guide studs on jb from channels on bcm mounting bracket
Remove bcm from jb.
Posted on Jan 02, 2009
It is located on the back side of the underdash fuse box (junction block). You remove the lower steering column cover and knee blocker reinforcement. Then remove two plugs from the bottom of the BCM.
Remove the bolts holding the junction block to dash panel mounting bracket. Remove the junction block from the bracket. Remove screws holding the BCM to the junction block. Slide the BCM downward to disengage guide studs on jb from channels on BCM mounting bracket
Posted on Mar 23, 2009
2001 Chrysler Town and Country- Won't start. Turn over. It acts like the fuel is not getting to the engine. After many attempts , it starts and runs like there are no problems. The car has 120,000 and has never had a problem. Is the fule pump bad?
Posted on Aug 17, 2009
I have a 2005 Chrysler T&C. The turn signal would not work at all or activate incorrect side. The switch is easy to remove as described by dukecityman.
Once the switch is of, it has four screws holding it together.I took this apart to find that there was a circuit-board which was contaminated with dirt. wiped it of, put it back together, working fine.
If you take it apart use caution. there are parts on the "top" which will fall out. ( they go right back in) The circuit-board is on the "bottom" half. You really only need to take this part off. (less moving parts)
Your going to replace it anyway, whats the harm?
Posted on Jan 28, 2010
Tips for a great answer:
Jan 14, 2016 | Chrysler Cars & Trucks
Dec 16, 2015 | 2004 Chrysler Town and Country
Nov 29, 2014 | 1999 Chrysler Town & Country
Oct 06, 2013 | 2002 Chrysler Town & Country
Apr 21, 2013 | 2001 Chrysler Town & Country
Nov 24, 2009 | 1998 Chrysler Town & Country
Jul 02, 2009 | 2000 Chrysler Town & Country
May 01, 2009 | 2000 Chrysler Town & Country
Apr 03, 2009 | 1996 Chrysler Town & Country
Jun 21, 2008 | 2001 Chrysler Town & Country
94 people viewed this question
Usually answered in minutes!