Question about Volkswagen Cars & Trucks

Open Question

Remove and replace indicator arm on 2004 VW caddy van

Indicator arm/full beam headlight burnt out. Do I need to remove steering wheel.

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: replacing turn signal indicator

for the indicator bulb? no

Posted on Sep 27, 2008

alicantecoli
  • 22156 Answers

SOURCE: indicator box behind steering wheel burnt out

the relay is the flasher unit,but on some the flasher unit is on the back of the switch ,just take the shroud lower part off and you should see it if not remove both bits ,just done one today and cant remember already ,changed the whole fuse box as well.Known as old timers i think.have to find a nice young dolly bird because as the saying goes your only as young as the woman you feel.perhaps thats why rod stewart trades them in .

Posted on Feb 19, 2009

alicantecoli
  • 22156 Answers

SOURCE: peugoet 2002 indicator arm

dont think so think you only need to remove the shroud ,then the two torx headed screws that hold the switch assembly on ,from the bottom look upwards

Posted on Mar 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Low beam headlights not coming on.


a common problem on these cars is a wire breaking off the combination indicator/dip switch. remove the steering column cowlings and check that first, it can be repaired by resoldering if thats ok check the dip beam relay and wiring etc.hope that helps.

Apr 16, 2015 | 2004 Jaguar XJ

1 Answer

Indicators on my 2000 Audi a4 not working


sounds to me like your indicator arm on steering wheel is needeing replaced .

Mar 29, 2014 | Cars & Trucks

1 Answer

Turn indicator/wiper switch assembly replacement instructions please?


steps required to remove and replace indicator switch assembly.
1.disconnect the battery earth lead.
2.from the rear of the steering wheel remove the screws retaining the horn pad..
3.lift the horn assembly away from the steering wheel far enough to remove wiring.
4.Once that is done then move to the next step.
5.Remove the locknut and steering wheel nut .
6.then mark the end of the steering shaft and the steering wheel to correctly relocate and install in same position.
7.then with the correct tool remove the steering wheel from shaft.
8.then once the steering wheel is removed you can then move on to removing the lower steering column cover screw and then remove cover.
9.disconnect the wiring from the multi point connector under instrument panel.
10.release and free wiring harness.
11.unscrew and remove the hazard switch knob.
12.remove the dipper-wiper switch securing screw and manoeurve the switch upwards.guiding the wiring through the column.
13.you will actual find there are 3 phillip head screws securing the switch to lever switch to the combination switch.

14.when putting this assembly back to together just follow these steps in reverse..
hope you find this helps you

Aug 03, 2012 | Holden VK Cars & Trucks

1 Answer

My headlight switch locked up. How do I replace it. also I need to install an alternator. Do you have instructions?


1988 ,,this vehicle can be work on with arm tied behind your back as they are nice and uncomplicated ,you will need to remove the steering wheel for the indicator switch ,and as for the alternator its only three bolts

Jul 24, 2010 | 1988 Volkswagen Cabriolet

1 Answer

The high beam indicator is on. The low beams don't work.


You need a new headlight dimmer switch located on the steering column between the dash and the firewall

Jun 03, 2010 | 2000 Mazda MPV

1 Answer

Peugoet 2002 indicator arm. left indicator keeps going on by itself. do we need to take the steering wheel off to remove the indicator arm? have been told we need to replace to whole unit (wiper arm too)...


dont think so think you only need to remove the shroud ,then the two torx headed screws that hold the switch assembly on ,from the bottom look upwards

Mar 08, 2010 | Peugeot 405 Cars & Trucks

3 Answers

Change the Front indicator on an Audi A4 2001


Take out the two Torx bolts on top of the headlight assembly. Then there is a third hidden bolt. Look through the holes in the top front of the fender, above and behind the headlight's turn signal portion (you'll probably need to shine a light in there) and you'll see the third bolt. Remove that and the headlight pulls straight forward and out. Then you can change the bulb.

Dec 09, 2008 | 2001 Audi A4

1 Answer

Headlight 2004 camry


your module in the steering wheel is faulty you should get it replaced. you can purchase it at ie Napa for alot less than through a dealer.

Sep 01, 2008 | 2007 Toyota Camry

2 Answers

1996 Volkswagen GTI LOw beams and wipers


It sounds like your switch has burnt out . You will need to remove the steering wheel and steering cowlings to remove and check the switches . Regarsd VW Audi Tech

Jun 28, 2008 | 1996 Volkswagen GTI

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...