Question about BMW Cars & Trucks

1 Answer

Vibration in braking system on 530d checked out all good discs and pads replaced. DSC light coming on is this the problem?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Generally vibration in the brakes is cause by warped rotors. The cause of warped rotors could be over tightening the lugnuts, or excess heat due to a currently stuck or previously stuck caliper.

Vibration can also be noted in the brakes due to faulty tie rod ends, ball joints and wheel bearings/hubs. Tires can also cause a vibration in the brakes, but normally you will feel it more when driving at certain speeds.

Finally in some unusual cases vibrations while braking have been traced back to the transmission and it's related components. This is fairly uncommon though.

Posted on Nov 09, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
bbtoast
  • 319 Answers

SOURCE: 95 sub emerg/parking brake light will not turn off

Only two things should normally activate the light:

Parking Brake engaged switch.

Low Fluid level in master cylinder.

I don't think you did any work to the Parking brake, but you should check it to be sure.

I believe that you would have double checked the fluid level, but please check it again.

Other things that could activate the light would be a worn or leaking master cylinder; improper brake fluid type; a damaged brake booster diphragm .

I have attached a link with excellent info on how a brake system works here.

Also, does the light always stay on, or only when you apply the brakes?

Brian

Posted on Jun 25, 2008

  • 84 Answers

SOURCE: brake warning light on,beeper sounds when car is driving

Sounds like the sound when you leave the handbrake on. The same light as the low brake oil level will come on with the handbrake. And the warning sound coming from the cluster will come on if you leave the handbrake on and start driving to warn you that you left it on. Guessing your handbrake is not on and that your brake level sensor on the master cylinder is good (on the cap) check your handbrake switch and the wires there. You can unplug it and try it like that or you might have to bypass the 2 wires in the connector together. I can't remeber if with the handbrake on if it closes the circuit or the opposite. Once you have the connector in your hand you can unplug it with the car running and see if the light goes off. If not you can jump the 2 wires and see then. Or just check the switch isn't staying stuck. You'll see more once the handrake console is off. Just look around the mechanism of the handbrake and you'll find the switch.

Posted on Nov 20, 2008

ElDopa
  • 295 Answers

SOURCE: I replaced the front pads on a VW JETTA 2.5 and

Use the VAGCOM software tool, or just disconnect & reconnect the battery, that will reset any existing faultcode in the ECU.

Posted on Mar 22, 2009

emissionwiz
  • 76649 Answers

SOURCE: ABS light on after replacing the front and rear brake pads .

u will need to check the wheel speed sensors behind the brake rotors to see if they got damaged or disconnected during the brake job, as long as the ABS light is on the Anti-lock brake system is disabled, regular braking without the need of ABS will feel fine.

Posted on Apr 01, 2009

  • 67 Answers

SOURCE: BRAKE LIGHTS STAYING ON IN THE DASHBOARD

i´d say you missfitted the wearing sensors while changing the pad. they work that way, that when they get chassis contact, this triggers the dashboard light.

Posted on May 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Medium vibration coming from the front and through steering during braking from high speed.


2 things spring to mind. If stopping under heavy brakes ,the abs could be working giving you the impression of vibration But I am inclined to go with warped disc rotors. They give the impression of pulsations under you foot and will vibrate the steering to a degree. Check discs for condition ans check pads for lining thickness Anything under 1/4 of original thickness should be replaced

Mar 05, 2013 | Cars & Trucks

Tip

How To Help Keep Your ABS Brake light Off On Your Dashboard


Have you ever driven in someones car and seen the ABS light lit up like a Christmas Tree on the dash board?
Here are a couple of helpful tips on how to keep this braking system in good shape.
#1. When replacing your Disc brake pads be certain NOT to hit the wheel sensors on every wheel as damaging them can kick the ABS light on an when this light comes on the ABS system shuts down until it is repaired.

#2. Try to use the newer ceramic disc brake pads as they are less likel;y to throw dust all over the wheels and the sensors impediing the workings of the wheel sensors, thus requiring more frequent cleaning of the brake dust residue that forms on the sensors and ultimately causing the BCM to read a system failure and shut down the system till it is fixed.

#3. Be sure to have your wheel and axle bearings inspected for excess play as if they go bad the wheels can ultimately vibrate and wobble sending this information through the particular wheel sensor and back to the Body Control Module thus setting off the ABS light, and perhaps if the axle bearing etc. is bad enough, the excessive wobble could be translated as a wheel slippage thus causing the ABS to lock up the brake caliper on this particular wheel and create all sorts of havoc.
As always.....Happy Motoring!!!

on Aug 03, 2010 | Chevrolet Caprice Classic Cars & Trucks

2 Answers

Why is brake warning light is on


It can be issue with master cylinder or the problem is there is still some air there in the system,that has to be bleed.Or else the parts replaced are not aligned properly/.I suggest everything back.


There are few help links mentioned below to troubleshoot the issue.


Click the link below and follow its procedure:-----


2002 Ford Windstar: Brake Warning Light ON dash?

http://schematicsdiagram.blogspot.in/2012/06/2002-ford-windstar-brake-warning-light.html

-----------


Battery and brake Warning lights on Dash
http://alltypesofpartsreplacing.blogspot.com/2012/10/battery-and-brake-warning-lights-on-dash.html
-----------
ABS & Brake warning lights remains steady on dash? http://schematicsdiagram.blogspot.com/2011/12/abs-brake-warning-lights-remains-steady.html
------------


Brake warning light comes on and car will not start intermittently? http://repairhelpcenter.blogspot.com/2011/12/brake-warning-light-comes-on-and-car.html
------------ When the car stops, abs pump turns ON? http://howtobyme.blogspot.com/2011/12/when-car-stopsabs-pump-turns-on.html
----------- Where is Power Brake Booster located on 1995 Lincoln Town Car? http://howtobyme.blogspot.com/2011/12/where-is-power-brake-booster-located-on.html
----------- Sometimes ABS light comes on while Driving?


http://howtobyme.blogspot.com/2011/12/sometimes-abs-light-comes-on-while.html
-----------


All types of brake problems and repairs http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

----------
Brake Fade Issue? http://whoisbyme.blogspot.in/2012/07/brake-fade-issue.html

-----------
Brake System Troubleshooting? http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

----------
Car Brake lines have no pressure? http://schematicsdiagram.blogspot.com/2011/12/car-brake-lines-have-no-pressure.html

------------
Car Brakes Dragging? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-dragging.html

-------------
Car Brakes grabbing? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-grabbing.html

-----------
Car Brakes Making Noise? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-making-noise.html

-------------
Car Brakes Pulling? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-pulling.html

----------
Pulsating Brake Pedal? http://repairhelpcenter.blogspot.com/2011/12/pulsating-brake-pedal.html

---------
Spongy brake pedal? http://repairhelpcenter.blogspot.com/2011/12/spongy-brake-pedal.html

----------
Hard Brake Pedal? http://repairhelpcenter.blogspot.com/2011/12/hard-brake-pedal.html

------------
Fading Sinking Brake pedal?

http://whoisbyme.blogspot.in/2012/06/fading-sinking-brake-pedal.html

-------------
Feels Like Brake pedal Pulsating http://repairhelpcenter.blogspot.in/2012/06/feels-like-brake-pedal-pulsating.html

-------------
What is Brake Drum Bar? http://repairhelpcenter.blogspot.in/2012/02/what-is-brake-drum-bar.html

------------
ABS light stays on but brakes work fine?

http://howtobyme.blogspot.com/2011/11/abs-light-stays-on-but-brakes-work-fine.html

-----------
Vibrations while braking On Chevrolet Van? http://technoanswers.blogspot.in/2012/04/vibrations-while-braking-on-chevrolet.html

-----------
Dragging brakes? http://howtobyme.blogspot.in/2012/03/dragging-brakes.html

------------
Brake pedal stuck? http://howtobyme.blogspot.in/2012/03/brake-pedal-stuck.html

-----------
After replacing brake rotors and pads, brake pedal remains on floor? http://technoanswers.blogspot.in/2012/02/after-replacing-brake-rotors-and-pads.html

----------
How to replace Brake Power Booster? http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-brake-power-booster.html

-----------
1997 Chevy Tahoe Brake lights not working? http://technoanswers.blogspot.in/2012/02/1997-chevy-tahoe-brake-lights-not.html

------------
How to service Drum brakes? http://repairhelpcenter.blogspot.in/2012/02/how-to-service-drum-brakes.html

-----------
What type of problems usually noticed on Drum brakes? http://repairhelpcenter.blogspot.in/2012/02/what-type-of-problems-usually-noticed.html

----------
How to test Drum Brakes? http://repairhelpcenter.blogspot.in/2012/02/how-to-test-drum-brakes.html

---------
Brake Bleeder Screw Function? http://repairhelpcenter.blogspot.in/2012/02/brake-bleeder-screw-function.html

---------
Toyota Tundra: Parts diagram to replace Brake Drums?

http://technoanswers.blogspot.in/2012/06/toyota-tundra-parts-diagram-to-replace.html
---------- Squeak and grinding sound is heard when brakes are applied?

http://technoanswers.blogspot.in/2012/02/squeak-and-grinding-sound-is-heard-when.html

------------

Brake Pads Inspection on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/brake-pads-inspection-on-acura-integra.html

-------------

How to remove Brake Pads on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-pads-on-acura.html

--------------

How to remove Brake Disc Rotor on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-disc-rotor-on-acura.html

------------

Brake Caliper OVERHAUL on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/brake-caliper-overhaul-on-acura-integra.html

------------

How to remove Brake Caliper on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-caliper-on-acura.html

------------

How to remove Parking Brake shoes on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-parking-brake-shoes-on.html

-----------

How to remove Parking Brake Cable on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-parking-brake-cable-on.html

-------------
Brake pedal is pulsating and vibrating? http://repairhelpcenter.blogspot.com/2012/01/brake-pedal-is-pulsating-and-vibrating.html

----------

These details will help.

Nov 23, 2012 | 2004 Ford Expedition

1 Answer

How do I top up my brake fluid on my bmw530d 2006


ok your beemer doest need brake fluid added unless there is a leak in the system. you have brake pad wear indicators that light up dash light when brakes get low. the fluid in system goes down as pads wear fluid does not need added to system. at a glance at master cylinder i can tell if pads need looked at. the master cylinder is under engine cover at fire wall drivers side remove and look but dont add unless a leak is present and then have repaired.

Aug 19, 2012 | 2007 BMW 530D

1 Answer

I have a orange warning light on, circle with 3 dashes either side ?


This symbol is for worn brake pads. When the pads wear down the sensors make electrical contact with the disc rotor and the light comes on as the circuit is completed. Check out brake pads all round, inmost cases the pads at the front wear down first. Check symmetry of wear. The pads should wear symmetrically and evenly either side of the brake disc. If the pads are wearing on just one side of the disc check that the caliper body is not seized and that the brake guide pins are allowing freedom of movement. It is always a good idea to replace all the pads on one axle at the same time as this ensures even braking. Remember, after replacing pads to pump the brake pedal until stiff prior to moving off so that you can be sure that you can stop when you have to.

Mar 22, 2011 | Volkswagen Golf Cars & Trucks

2 Answers

Renault clio abs light comes on with vibration through brake pedal. discs and pads renewed


How hard are you stepping on the brake pedal? What you are describing sounds like the ABS system activating. When you step on the pedal hard enough to engage the ABS the light will come on, in some cars it will blink. You will also feel the thumping/vibration in the pedal since the system works by repeatedly engaging and disengaging the brakes. If it is happening when you step lightly on the brakes then you may have a bad wheel speed sensor or possibly a bad or miss-adjusted brake switch.

May 01, 2010 | 1998 Volvo V70

2 Answers

Braking vibration. more severe at higher speeds/


Might want to have the ABS system checked. IF the vibration is also felt through the brake peddle by it surging I would suspect the ABS system is misreading and causing the vibration. Good luck and have a good day.

Jul 22, 2009 | 2003 Chevrolet Impala

2 Answers

My DSC and Brake warning lamps continuously light up in yellow once the engine has warmed up. They remain on after driving for a while and sometimes they shut off. Any ideas?


Check to see if your brake pads and rotors are in good condition. Or if you have replaced the pads yourself and have not reset the wheel sensors this would cause the ABS Antilock Brake System light and the ASC Automatic Stability Control light to stay on as the ASC uses the ABS brakes with computer assistance to control the car

Jul 09, 2009 | 2001 BMW 325

1 Answer

ABS and ASC warning lights stay on 2000 530d


Check to see if your brake pads and rotors are in good condition. Or if you have replaced the pads yourself and have not reset the wheel sensors this would cause the ABS Antilock Brake System light and the ASC Automatic Stability Control light to stay on as the ASC uses the ABS brakes with computer assistance to control the car

Jul 06, 2009 | 1999 BMW 5 Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...