Question about 2000 Toyota Sienna

Open Question

Integration Relay 2000 Toyota Sienna

Can you send pictures of how your removed Integration Relay? I have my Sienna dash torn appart, but I can't figure out how to remove the fuse box to view what is connected to the back.

Thank you for your time,

William

Posted by on

1 Suggested Answer

  • 2 Answers

SOURCE: integration relay p/n 82641-08020 for my 2000 Toyota Sienna van

Dealer Item ` $200
Junk Yard ~ $100
https://toyotapartscenter.net/toyotasiennaparts.html?gclid=CPX5u8HUlZ4CFSn6agod6Ae1oQ sells them for $167.17 + shipping and tax
PH; 800-516-1455
I recommend a pull, light tap and reconnect, recheck B4 buying. Also, shop manual has proper test procedure, Pages BE16-17

Posted on Nov 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a 12V output from integration relay going to headlight switch of 98 sienna LE. no headlight both hi and low, but flash headlight is working.


There is a fuse for both the low and high beam headlights.
There is a relay for both as well.

The headlight switch feeds the relay.

Thank you the excellent symptom of the problem.

Yes,12 V. goes to the headlight switch.

Mar 09, 2013 | 2000 Toyota Sienna

1 Answer

2000 Toyota Sienna. Does it have a low pressure switch? A/C Compressor clutch not engaging. 5A fuse ok and dash A/C light lights. System has some pressure. How do I identify the clutch wire to engauge...


The Sienna has had problems with the relay that controls the clutch going bad. Under the hood, next to the battery, there is a fuse and relay box. One will be marked magnetic clutch or an abbreviation of that. If the part number is 90987-02022, it should be changed out to the updated relay with a part number of 90987-02028. It 's around $70 from Toyota or you could find an aftermarket one for about $17 at your local automotive parts store. On some models the a/c light will blink if this is the case but not on all. You could swap it with the fog or possibly the horn relay to see if this is the problem.

May 24, 2011 | 2000 Toyota Sienna

1 Answer

2000 sienna first power door and dome lights don't


Chances are its a door switch or the wiring close to it. the wires bend every time you open and close the door. Check for that but if your dead set on a relay. look under the hood you should find a relay panel on the left(drivers side) finder well. On the cover of the panel box will be a listing and placement for all the relays

May 14, 2011 | 2000 Toyota Sienna

1 Answer

Blinker fuse location for 2000 toyota sienna. blinker doesn't work


The flasher relay is underneth the dash to the left of the steering wheel. You can see it if you use a mirror.

May 28, 2010 | 2000 Toyota Sienna

1 Answer

The dome lights quit working and the electric door locks will not work if the car is not running.


Probably the integration integration module, a common problem for this type failure.

Oct 08, 2009 | 2000 Toyota Sienna

1 Answer

Integration relay p/n 82641-08020 for my 2000 Toyota Sienna van


Dealer Item ` $200
Junk Yard ~ $100
https://toyotapartscenter.net/toyotasiennaparts.html?gclid=CPX5u8HUlZ4CFSn6agod6Ae1oQ sells them for $167.17 + shipping and tax
PH; 800-516-1455
I recommend a pull, light tap and reconnect, recheck B4 buying. Also, shop manual has proper test procedure, Pages BE16-17

Sep 24, 2009 | 2000 Toyota Sienna

1 Answer

Where is located the fuse or fuses from rear and break lights ,please. toyota sienna 98. is without rear and break lights


Remove push-on plastic nut beside parking brake. Detach side kick panel. Remove lower dash panel. Three screws, two bolts. The fuse diagram is on the back of the panel. That's for a 2000. Think it has the same body style.

Feb 18, 2009 | 2000 Toyota Sienna

1 Answer

99 sienna pwr door locks not locking


Well, I went to the dealer and was told that Integration relay does run both the remote locking, physical pressing the actual lock/unlock button on the armrest and dome light and door chime. I had NONE of these functioning, despite checking/replacing fuses, trying to reprogram the key, etc.
I do not have the picture of the relay with me right now.
Please explain the problem in little bit more detail and what did you already do try to fix it and I will see what I can do.

Nov 21, 2008 | 1999 Toyota Sienna

1 Answer

99 sienna pwr door lock malfunction


no/ its the lock actuators that need to be replaced/ Please rate my response thank you very much

Nov 20, 2008 | 1999 Toyota Sienna

5 Answers

Power locks and keyless entry not working


Thanks for the help. I repalced the 10amp fuse that controls the dome lights and the wireless lock started working ..

Oct 25, 2008 | 2002 Toyota Sienna

Not finding what you are looking for?
2000 Toyota Sienna Logo

Related Topics:

720 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...