Question about 2004 Pontiac Grand Am
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Is it the 3400 v6 or the 2.2l four cylinder? If it the v6 then what you have to do is first know where it is. It located on the end of your fuel rail on the driver side of the car. There will be a plastic hose coming off the top of the regulator, unplug it. You then have to undo your fuel line that runs into the bottom of the regulator. You have to use a wrench to get it off, not sure what size it is. Once you undo the fuel line the next step is to unbolt it from the fuel rail. There will be two screws that run in the side of the fuel pressure regulator that are facing the driver side of the car and are threaded in towards the passenger side of the car, just undo those two screws and the regulator should come off. Just repeat the process backwards to put it back on.
Posted on Jan 09, 2009
it all depends on whose doing it, and if you have the right tools. but if your someone who knows what there doing it shouldnt take longer then about hour and half-2 hours if everything goes smoothly. but it just all depends on if you have help and no what your doing.
Posted on Apr 26, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
You don't need to drop the tank to replace the fuel pump.
Under the carpet in the trunk there is a access cover that you can take off to access the pump. You need a good snap ring pliers to get the snap ring off to release the pump from the tank.
I wish people would have first hand knowledge of the process before they start clicking post and cost a person a lot of money and time for something that isn't needed to be done to complete the job.
Posted on Oct 11, 2009
no, here is procedure according to autozone.com Fig. Exploded view of the water pump assembly mounting-3.8L engine
Negative battery cable. Drive belt Water pump pulley Power steering pump and move it aside Water pump
Water pump using a new gasket and torque the long bolts to 25 ft. lbs. (34 Nm) and the short bolts to 16 ft. lbs. (22 Nm) Water pump pulley and torque the bolts to 115 inch lbs. (13 Nm) Power steering pump and torque the bolts to 25 ft. lbs. (34 Nm) Drive belt Negative battery cable
Fig. Exploded view of the water pump assembly mounting-3.8L engine
Posted on Sep 29, 2010
Tips for a great answer:
May 24, 2017 | 2004 Pontiac Grand Am
Mar 16, 2015 | 2004 Pontiac Grand Am GT
May 08, 2014 | 2004 Pontiac Grand Am
Feb 24, 2012 | 2002 Pontiac Grand Am
Apr 06, 2011 | 2004 Pontiac Grand Am
Dec 12, 2010 | 2004 Pontiac Grand Am
Jun 21, 2010 | 2004 Pontiac Grand Am
Mar 29, 2010 | 2004 Pontiac Grand Am
Jul 14, 2009 | 2004 Pontiac Grand Am
Jul 28, 2008 | 2003 Pontiac Grand Prix
290 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: