Question about 1999 Lincoln Town Car
Fule pump fuse and control module locations please
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
have you checked out the core packs? and if you go to autozone you can get a printed diagram where the crankcase sensor is located also look for the location normally under the hood for the fuel pump relay
Posted on Jan 15, 2009
You DO NOT need to remove the fuel tank to replace this filter.
My 1999 Signature Series Town Car did not require the special tool. It has two push out clips which hold the fuel lines in place. New clips came in the box with the filter. The clips are off-white in color and look like skinny versions of the plastic safety plugs moms use to keep toddlers from sticking objects into electrical outlets in your home.
The fuel filter is located just below the rear passenger side door - along the outside rail of the frame. It May or MAY NOT require the special tool.
BEFORE YOU BEGIN.
Be sure to depressurize the system by turning the off fuel pump - either by unplugging the cord in the left side of the trunk next to the hinge mount or removing the fuse (#14 20 amp in the fuse box under the hood).
It's a good idea to take a picture of the assembly before starting to refer to when you reassemble it.
Spread some shop towels or rags on the ground to catch any fuel which runs out of the filter when you remove it.
There is a hose clamp holding the filter in its housing - loosen with a screwdriver.
Pop out the two clips then pull the fuel lines out of the filter at each end.
Wiggle the filter out of its mounting bracket, then install the new filter and reinsert the fuel lines into it.
Be sure the clips are inserted correctly to avoid leaks. TIghten the hose clamp.
Replacement took about four minutes and required only a flat-blade screwdriver. Clips pop out and back in with only finger pressure.
Posted on Mar 24, 2009
My boyfriend connected the battery up backwards and fried some wires. How do I know which wires are fried? And how much would a new fuse box be?
Posted on Jan 28, 2010
SOURCE: do you know where the
It is located in the Battery Junction Block located on the left front of the engine compartment forward of the wheel well area. It is marked "Relay 1" in the picture below.
Posted on Jan 23, 2011
Tips for a great answer:
Mar 24, 2017 | 2001 Lincoln LS
Jul 25, 2012 | 2000 Lincoln Continental
Mar 01, 2011 | 1999 Lincoln Continental
Apr 05, 2010 | 1999 Ford F150 Regular Cab
Mar 20, 2010 | 1990 Lincoln Town Car
Nov 17, 2009 | 1999 Mazda 626
Apr 18, 2009 | 2000 Lincoln Continental
Oct 27, 2008 | 1999 Lincoln Town Car
Aug 07, 2008 | 1995 Lincoln Continental
97 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: