Question about 2002 Chrysler PT Cruiser

Open Question

Power steering pressure switch on 2002 pt cruiser

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
justuscc
  • 360 Answers

SOURCE: power steering fluid PT Cruiser

power steering fluid or dextron 3 trans fluid

Posted on Oct 10, 2008

Ad
  • 10 Answers

SOURCE: Power door locks quit working, both interior

motor1258.

how did you check the relays, to find the problem with the door locks you need to remove the door panel and test for power at the door lock actuator or you can just buy the master switch and put it in and see if it works.

Posted on Apr 29, 2009

  • 60 Answers

SOURCE: my 2002 pt cruiser lost power steering suddenly

check to see if the serpantine belt is still there. It sounds like like it broke. this belt runs all of the accesories on the vehicle including the water pump. So if this happened it probably starting running hot too

Posted on Jun 23, 2009

  • 1071 Answers

SOURCE: My check engine light came on and it was P0551

it is a small sensor on pump just need a ratchet and socket it is a one wire sensor like old oil pressur sensors just tug wire it will come off

Posted on Jul 21, 2009

  • 105 Answers

SOURCE: power steering pump went out on my 2002 chrysler

not hard at all theres no special requirement just need proper decent tools and some adjustable spanners

Posted on Dec 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power steering leak


Replace the pump. The pressure regulating valve must be stuck and causing this leak. Either that or you are just unlucky and getting some really crappy hoses.

Aug 20, 2013 | 2001 Chrysler PT Cruiser

1 Answer

Power steering went out on my 2002 pt cruiser


Please check the TYRE pressure if this seems OK then you must hoist the car and check the steering with the wheels up . If this is not found to be free the power steering section must be checked in detail starting from the drive, the hydraulics to the ball joint links. Loss of fluid or fault in pump cannot be ruled out. check the drive belt which if failed will be indicated.

Nov 21, 2011 | 2002 Chrysler PT Cruiser

2 Answers

PO551 fault code on PT cruiser...power steering??


i would check the power steering fluid to make sure it isn't low. if that checks out then i would just keep an eye on it.

Jul 30, 2010 | 2003 Chrysler PT Cruiser

1 Answer

My check engine light came on and it was P0551


it is a small sensor on pump just need a ratchet and socket it is a one wire sensor like old oil pressur sensors just tug wire it will come off

Jul 21, 2009 | 2001 Chrysler PT Cruiser

2 Answers

Where is the Power steering pressure switch located on a 2000 mercury sable 3.0 OHV?


it is located in the p/s line at the steering rack where the steering shaft is located

Jul 06, 2009 | Mercury Sable Cars & Trucks

1 Answer

My 2002 pt cruiser lost power steering suddenly


check to see if the serpantine belt is still there. It sounds like like it broke. this belt runs all of the accesories on the vehicle including the water pump. So if this happened it probably starting running hot too

Jun 23, 2009 | 2002 Chrysler PT Cruiser

2 Answers

Where is the power steering sensor located on a pt cruiser


i have changed the pressure sensor switch on my 2001 PT Cruiser (B). to find it you will have to put the car on ramps and go under the car until your under the cross member (right behind the front wheel) it will be just behind the cross member closer to the driver side wheel. remember once you remove the sensor gravity will work against you and power steering fluid will pour out of the sensor hole. and when under a car there is really no place to go and if your not careful you will have to resign yourself to being covered in fluid. good luck!

Apr 13, 2009 | 2001 Chrysler PT Cruiser

Not finding what you are looking for?
2002 Chrysler PT Cruiser Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...