Question about Nissan Cars & Trucks
Posted by Anonymous on
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: o2 sensor location
DTC P0156 indicates the output voltage of the downstream Heated Oxygen Sensor (HO2S) is less than some calibratable functional window.
The possible causes are:
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.
Posted on Apr 16, 2009
It is small and round (2 wire connector) and located either in the flexiable air intake hose to the engine or in the engine air filter housing.
Posted on Nov 18, 2008
bank 1 refers to the side of the engine that #1 cylinder is on , and sensor 2 refers to downstream , after the catalytic converter. , this link shows bank 1 on a 2001 nissan maxima V6 being on the firewall side . if you had a 4 cylinder it would be downstream after the catalytic converter .
Posted on Jan 04, 2009
Tips for a great answer:
Sep 06, 2015 | Nissan XTrail Cars & Trucks
Feb 26, 2015 | 2005 Nissan X-Trail 2.5i
Aug 03, 2014 | 2005 Nissan X-Trail 2.5i
EVAP Canister Vent Valve Malfunction (Closed)
EVAP canister vent control valve is damaged or has failed.EVAP canister vent control valve rubber tube is blocked.EVAP control system pressure sensor is damaged or has failed.EVAP water separator is damaged or has failed.EVAP canister is saturated with water.Click here to see the suspected parts to check out.
Jan 29, 2013 | 2005 Nissan X-Trail 2.5i
Jul 30, 2012 | Nissan Quest Cars & Trucks
Jan 21, 2011 | 2005 Nissan Xterra
A code P0430 may mean that one or more of the following has happened:
It is most likely that an O2 sensor just prior to the catalytic converter has gone "lazy" and is not reading properly. To remove the O2 sensor, I would soak the sensor first with a rust penetrant and then you will need a 7/8" wrench or socket (depending on the sensor's location).
Oct 25, 2010 | 2005 Nissan Frontier
261 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: