Question about Cars & Trucks

Open Question

2004 jeep liberty code po839 4x4 switch circuit high means?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Brian032472
  • 150 Answers

SOURCE: 2003 Jeep Liberty heater fan problem

It is the blower motor resistor. Look under the passanger side dash and locate the fan housing (looks round and black in color. Then locate the resistor it will be in that housing usually withtwo ten millimeter nuts or two simple screws holding it in. unplug the harness to the resistor and remove the resistor. Part store price is approx. 50.00. Note: on aftermarket (not Jeep) resistor sometimes you have to modify the housing a little to get it in. Hope this helps.

Posted on Feb 01, 2009

Ad
  • 2 Answers

SOURCE: how to replace a blower motor resistor in a 2004 jeep liberty

You have to take the glove box off and it is right behind it, need a #20 Torx to take it replace it. The glove box is the hardest part of the job, I just replaced mine on an 05 Grand Cherokee but it didn't fix it for me, was well worth the $8.60 to try though.

Posted on Apr 06, 2009

  • 1 Answer

SOURCE: 2004 jeep liberty thermostat change?

ihave to change my thermostat in my 04 jeep liberty is it hard

Posted on May 22, 2009

  • 1348 Answers

SOURCE: 2004 jeep liberty drive train slips when accelorating from a stop

check the drive line play at the output of the transfer case to the rear universal joint.the gears are known for that.

Posted on May 26, 2009

  • 73 Answers

SOURCE: i have code P0320 and P0340 on my jeep liberty

P0320 Ignition Engine Speed Input Circuit malfunction

P0340 Camshaft Position Sensor Circuit malfunction

Posted on Apr 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the position of radiator fan relay on jeep liberty 2006


no idea to be honest earlier jeeps had then at the front of the wing down below as i remember ?? newer one would i imagine be in the electrical box under the bonnet near the battery

Dec 02, 2016 | Jeep Cars & Trucks

1 Answer

I have a 2004 Jeep Liberty . Air Bag light is on and scanner said problem is Internal 1 . What does that mean?


The airbag module is dead. Internal 1 is a failure of the internal circuit check. You have to replace the module.

Mar 08, 2015 | 2004 Jeep Liberty

1 Answer

What does po871 mean on a 2002 jeep liberty


Definition of DTCP0871for All Makes Code: P0871 Category: Powertrain Definition: Transmission Fluid Pressure Sensor/Switch "C" Circuit Range/Performance
this could be low fluid level or a faulty sensor. Not easy to diagnose without seeing the vehicle.
Hope this helps..

Mar 26, 2011 | 2002 Jeep Liberty

1 Answer

My jeep liberty 2004 3.7 . Is showing these code`s... po300 , p0522 , po335...and I find she`s hard to start....why...


there appears to be a problem with your crank position sensor and your oil pressure switch.
http://www.obd-codes.com/p0300
http://www.obd-codes.com/p0335
  • P0522 Engine Oil Pressure Sensor/Switch Circuit Low Voltage
  • http://www.jeepforum.com/forum/f28/p0522-engine-oil-pressure-sensor-switch-circuit-low-voltage-618006/
  • The crank position sensor or its connection is probably at fault. The engine needs the signal that the crank postion sensor provides to inject fuel and supply spark at the correct time.

    Feb 06, 2011 | 2004 Jeep Liberty

    1 Answer

    H02s bank 1 sen 2, heater circuit high 2004 jeep liberty v6


    check for wire terminal pushout or spread terminal at connector where o/2 plugs into harness

    May 28, 2010 | 2004 Jeep Liberty

    2 Answers

    I am getting a trouble code thats reading P0137 on my reader for a 2004 Liberty chrysler, any idea as to what the problem is


    Symptoms There may be no visible symptoms to the driver, other than the MIL (Check Engine / Service Engine Soon) illumination.
    Causes A code P0137 may mean that one or more of the following has happened:
    • Faulty o2 sensor Exhaust leak near the rear sensor
    • Plugged catalyst
    • Short to voltage on O2 signal circuit
    • High resistance or open on O2 signal circuit
    Possible Solutions
    • Replace faulty sensor
    • Repair exhaust leak near the rear sensor
    • Check for restriction in catalyst and replace as necessary
    • Repair short, open, or high resistance on o2 signal circuit

    Jan 18, 2010 | 2004 Jeep Liberty

    1 Answer

    2004 jeep liberty heater fan works on 123 but not on high


    What do you mean you "went through a car"??? Did you crash???
    Generally one speed being "out" is caused by a burned out relay or resistor pack. Check those!!!

    Jan 11, 2009 | 2004 Jeep Liberty

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    299 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...