Question about 2002 Dodge Ram Maxi

1 Answer

EGR Valve location

I have a 2002 Dodge Ram 4.7L 2wd and I need help locating the EGR Valve. Would you point me in the right direction? Thanks in advance for responses

Posted by on

  • gizmo1312 May 02, 2009

    Hi I have a 04 Dakota where is the E G R valve located on the truck ?

    4.7 4wd Quad cab

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 133 Answers

4.7 does not use an egr valve

Posted on Jan 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 98 dodge ram 1500 5.9L 2wd is stalling. Looked up a couple things and the closest thing that sounds what it would be is a bad EGR valve. My problem is that my vehicle does not have an EGR valve...


Egr is a federally mandated system since the 1970s in various forms. If your truck does not have one then it has been modified and that is the first step to fixing it properly..undoing the modifications.

Aug 24, 2016 | Dodge Ram 1500 Cars & Trucks

1 Answer

Auto part store says there is no egr valve on 08 dodge ram 1500 4.7. True?


25 - Emissions Control/Exhaust Gas Recirculation, Gas/VALVE, Exhaust Gas Recirculation (EGR), 4.7L/Removal REMOVAL collapse.gif Labor Operations: Click to display a list of Labor Operations associated with this procedure

2431021.jpg The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head. An exhaust gas routing tube connects the EGR valve to the intake manifold.
1. Use a diagnostic scan tool to record any Diagnostic Trouble Codes (DTC). 2. Remove the throttle body resonator. 3. Perform the fuel system pressure release procedure (Refer to 14 - Fuel System/Fuel Delivery - Standard Procedure) 4. Disconnect and isolate the negative battery cable.


2430847.jpg 5. Disconnect the power brake booster vacuum hose (1) and the vapor canister purge hose (2) at the intake manifold.


2430720.jpg 6. Disconnect the EGR valve solenoid electrical connector (1).


2430801.jpg 7. Remove the EGR valve assembly retaining bolts (1). 8. Remove the EGR valve and the EGR routing tube from the engine as an assembly. 9. Remove and discard the metal gasket located between the cylinder head and the EGR valve assembly.


2433378.jpg 10. Remove the EGR valve routing tube retaining bolts (1) at the EGR valve assembly 11. Remove the EGR valve routing tube and discard the gasket.

Feb 14, 2012 | 2008 Dodge Ram 1500 2WD

1 Answer

I cant locate the egr valve on a 1998 Dodge ram 1500 5.2 L


An EGR valve assembly located at the front of the intake manifold. The EGR valve is a poppet style valve (on/off only) and is controlled by an internal diaphragm.

af91f0c.jpg

Fig. EGR location and associated components-California diesel

Hope helps (remember to rate this and comment ).

Sep 14, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

Where is the egr valve on a 2005 dodge 1500 5.7L


The electronic EGR valve and solenoid assembly (3) is attached to the front of the right cylinder head (1). An exhaust gas routing tube connects the EGR valve to the intake manifold.

2efe0f8.gif

Disconnect electrical connector (1) from EGR solenoid (2). Remove two bolts (3) connecting EGR tube (4) to valve assembly. Remove gasket located between EGR tube flange and EGR valve assembly.

Remove two mounting bolts (2). Separate valve assembly (3) from cylinder head (1). Remove and discard metal gasket located between cylinder head and valve assembly.
The new EGR valve will come with a new metal gasket. You can reuse the smaller gasket for the metal pipe going to the egr valve as long as its not damaged.

TY for using Fixya; remember rated this post.

Apr 14, 2010 | 2005 Dodge Ram 1500

1 Answer

Need to replace egr valve. where to locate and how to repair



Wish you could have also included the engine size.

Most popular engine is the 5.7

EGR Location:

Located on Right side of engine behind and below alternator.

Recommend you purchase a new one and it will then be easy to locate.

Hope this tip helps.

r/David

Feb 18, 2010 | 2005 Dodge Ram 1500

1 Answer

Is the EGR valve located near the ESIM Canister on a 2008 Dodge Ram 1500? My check engine light came on and the problem was that the ESIM canister was missing/no there. Is this something that could be...


well knowing Dodge as well as i .....dooo.Yes! it probably did fall off! i seen some really sorry work come out of their plants over the years and yes you need to replace it also EGR valve should be on the back side of the intake manifold

Jan 15, 2010 | 2008 Dodge Ram 1500 2WD

1 Answer

Where is the egr valve on a 2005 godge ram trk, 1500 2wd with a 5.7lt hemi


A new EGR Valve that comes from Dodge them selfs will go for around 50$

- as for replacing, the EGR valve has 4 bolts, and on this year ram in right in front of the passenger side head. Be careful not to mix up the wiring.

--Should look something like this..
https://w05.dealerconnect.chrysler.com/service/mds2002/serviceInfo/en_US/9565.jpg

Dec 30, 2009 | 2005 Dodge Ram 1500

2 Answers

Where is the EGR valve on 1986 Dodge Ram D50 pickup 2.0cc 4 cyl


if there pipes or tubes on top of your exhaust manifold that is where your EGR valve should be. if you want diagrams or text to help fix this problem i suggest the book from Chilton. they tend to explain thing pretty well.

Oct 01, 2009 | 1986 Dodge Ram 50

1 Answer

Im trying to locate a fcm and pcm...any ideas as


THE FRONT CONTROL MODULE IS LOCATED ON THE END OF THE UNDERHOOD FUSEBLOCK..YOU MUST REMOVE 1 BOLT FROM FUSEBLOCK AND 1 PLASTIC CLIP..SLIDE FUSEBLOCK BACK..FCM IS ATTACHED WITH 4 SCREWS TO FUSEBLOCK..PCM IS LOCATED ON RIGHT SIDE OF FIREWALL OF ENGINE COMPARTMENT..I HOPE THIS HELPS

Aug 26, 2009 | 2001 Dodge Ram 1500 Truck 2WD

2 Answers

2005 Dodge 1500 code p0404 EGR valve.


The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head ,

  1. Remove electrical connector (5) at top of EGR valve solenoid.
  2. Remove tube mounting bolt (1) at intake manifold.
  1. Remove two bolts (4) connecting EGR tube (1) to valve assembly.
  2. Remove gasket located between EGR tube flange and EGR valve assembly.
  3. Remove two EGR valve mounting bolts (5).
  4. Separate valve assembly (3) from engine.
  5. Remove and discard metal gasket located between cylinder head and valve assembly.
INSTALLATION
  1. Clean area at rear of left cylinder head where it joins base of EGR valve.
  2. Clean EGR tube where it joins EGR valve.
  3. Position new gasket between EGR valve and cylinder head.
  4. Position EGR valve to cylinder head. Install and tighten two bolts (5). Refer to Torque Specifications.
  5. Position new gasket between EGR tube flange and EGR valve assembly.
  6. Position EGR tube (1) to side of EGR valve and into intake manifold.
    1. Install EGR tube flange bolt (1) at intake manifold. Tighten bolt. Refer to Torque Specifications.
    2. Connect electrical connector (5) to top of EGR valve solenoid (2).Do a final tightening of two EGR tube bolts (4). Refer to Torque Specifications

Feb 05, 2009 | 2005 Dodge Ram 1500

Not finding what you are looking for?
2002 Dodge Ram Maxi Logo

Related Topics:

709 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...