Question about 2007 Honda Odyssey

1 Answer

How can I replace 2007 Hond odyssey tail lamps?

The tail lamps on the trunk door was broken in an accident.I got a replacement part. The lectrical connections are still okay. How can I pop it out from the door and place the new one back on it.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 716 Answers

You Have To Remove It From Inside The Trunk The Light Bulb Will Turn And Come Out Then To Remove The Lens Unscrews From Inside As Well.

Posted on Jan 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a service bulletin for a Pontiac G5 for electrical issues?


their are 7 recalls on the 07 none are for an electrical problem with lighting system
http://www.pontiacproblems.com/recalls/G5/2007 and the following tsb from march 2010 is for flickering lights
  • TSB #PIC-5073B NHTSA ID #10034409
    • Date Announced: MARCH 01 2010
    • Additional Info: How to Fix
    Summary: CHEVROLET/PONTIAC: VARIOUS ELECTRICAL CONCERNS. SIR LIGHT, IP LIGHTS FLICKER/INOPERATIVE, PARKING LAMPS FLICKER/INOPERATIVE, TAIL LAMP DIM/INOPERATIVE, TRUNK OPEN LIGHT, RADIO INOPERATIVE DOOR LOCK INOPERATIVE, NO START, NO CRANK. POSSIB
    More Information »

ELECTRICAL SYSTEM:WIRING

  • TSB #PI-0817 NHTSA ID #10047261
    • Date Announced: SEPTEMBER 01 2012
    • Additional Info: How to Fix
    Summary: CHEVROLET/PONTIAC/SATURN: ENGINE FAILS TO START AFTER ENGINE CRANKS DUE TO FUEL PUMP WIRE HARNESS CONNECTOR NEEDS REPLACING, WITHOUT REPLACING FUEL PUMP COVER ASSEMBLY (FUEL PUMP FLANGE). MODEL 2007-2010 COBALT, G5, ION. *PE
    More Information »

ELECTRICAL SYSTEM:FUSES AND CIRCUIT BREAKERS

  • TSB #PIC-4578 NHTSA ID #10022806
    • Date Announced: JUNE 01 2011
    • Additional Info: How to Fix
    Summary: EPS/STR WHEEL CONTROL FUSE (#19) OPEN. *KB UPDATED 10/04/07. *NJ UPDATED 8/7/09. *PE UPDATED 8/1/11. *PE

    More Information »
  • TSB #PIC3385 NHTSA ID #10020916
    • Date Announced: FEBRUARY 01 2008
    • Additional Info: How to Fix
    Summary: REPEATED PARK LPS FUSE OPEN. *KB (ADDITIONAL INFORMATION) UPDATED 4/1/08. *NJ
2007 Pontiac G5 Recalls CarComplaints com

Sep 21, 2015 | 2007 Pontiac G5 Gt Coupe

1 Answer

My driver side tail light just the left side is broken . i am not sure if that is the inner or outer portion it is the piece that is covering the actual tail light if that helps my car is a 2007 hyundai...


I assume you're asking if only the lens can be replaced. I'm afraid not. The tail lamps can only be acquired as complete assemblies. You will see what I mean when you remove the assembly and examine it. There are three (3) to four (4) 10mm nuts holding the assembly in place and can be accessed from inside the trunk. You'll need/want to use a deep-well 10mm socket.

Sep 05, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

Tail lights are not working...brake lights work. I realize it's from same bulb. Dbl filament intact. Fuses intact. Please advise. Thank you.


there is a tail lamp failure sensor located in the trunk on the drivers side around the gas door area..take apart and lok on both sides of the board and see if there are any burnt spots...if any part of the board is burnt replace the sensor and all the bulbs in the rear and if there is any kind of add on trailor harness remove it.....also in the trunk on the left side trunk hindge there is a harness that runs to the sensor and the tail lights......look good at the harness where it comes from the inside of the car to the trunk at the bottom back side of the hindge there is a place where 2 harness come together and where it will bend every time you open and close the trunk........look good for any broken wires cause this is a common problem with this year and model......let me and fixya know if i was of any help to you and a thumbs up and a comment would be greatly appreciated....if you need anymore advice let me know......good luck and have a blessed day.........

Jul 30, 2011 | 1994 Toyota Camry

1 Answer

Need to change out a broken tail light cover for a 2002 mercury sable


Replacing tail/brake/turn signal/backup lamp bulbs (page 59-60 of owners manual)

Sedan

The tail lamp, brake lamp, turn

signal lamp and backup lamp bulbs

are located in the same portion of

the tail lamp assembly. Follow the

same steps to replace either bulb.

1. Make sure headlamp switch is in

OFF position and open trunk and

remove two plastic mushroom nuts,

three push pins and the plastic

cover from inside the trunk to

access the lamp assembly.

2. Carefully pull the carpet away to

expose the lamp assembly hardware.

3. Remove four nut and washer

assemblies and the lamp assembly

from the vehicle.

4. Remove the bulb socket by

rotating it counterclockwise, then

pulling it out of the lamp assembly.

5. Pull the bulb from the socket and
push in the new bulb.

6. Install the bulb socket into the lamp assembly by rotating it clockwise.

7. Install the lamp assembly on the vehicle with four nut and washer

assemblies ensuring the washers on the nuts are flush with the body to

prevent water from entering the trunk.

8. Carefully push the carpet back in to place and install the plastic cover
inside the trunk with three push pins and two plastic mushroom nuts.

May 31, 2011 | Mercury Sable Cars & Trucks

1 Answer

How do you replace the light in a 2003 Honda Odysse clock? The digital clock works, but it doesn't light up at night


pls help me in how to replace the bulb on the clock display hond odyssey 2003. The digital still works but the light is out. Tks

Oct 12, 2010 | 2003 Honda Odyssey

1 Answer

How do you replace a tail lamp on a 2007 toyota avalon it appears you have to remove the bumper if that is the case how do you remove the bumper is there special tools ?


you should be able to access taillights through the trunk unloosen 2 or 3 fasteners and the globe where the bulbs are located.

May 17, 2010 | 2007 Toyota Avalon

1 Answer

How do I replace rear passenger side brake light on a 2007 Hyundai Sonata


There is an 'access panel' in the trunk liner right behind the tail lamp assy. Loosen wingnut to release cover. Now you have access to the bulb sockets. Be sure you replace the bulb with the same type (dual filament).. otherwise you could cause a short circuit between the 'parking lamp' and the 'brake lamp' circuits.

Sep 06, 2009 | 2006 Hyundai Sonata

1 Answer

Replacing tail lights and brake light component on a honda civic


Most cars tail lights are atached by a couple of nuts from inside the trunk. you will have to peel back the carpet , or remove plastic cover panel if there is one.

May 09, 2009 | 2002 Honda Civic

1 Answer

2003 Honda Odyssey Brake light replacement


open the rear hatch. Between the tail light housing and the rear hatch opening there is a trim strip with two flush fitted flap doors. Insert a small straight blade screwdriver into the small slot on the tail light side of the flap. Pry gently inboard and the small flap will open (the hinge side of the flap is on the side of the rear hatch opening.) Now you can remove the screws that hold the tail lamp assembly in place. Finally, there is still a "spear point" clip that fits into a socket near the front outboard corner of the assembly. Gently pry with a tape wrapped screwdriver (avoids scratches) and force the assembly straight back. The clip should release and free the assembly so you can change the bulb(s).

Jan 22, 2009 | 2003 Honda Odyssey

3 Answers

How to access brake tail light to change


Tail light replacement is not as hard as it seems.
Tools needed:flat head screwdriver and a deep 5/32 socket(a pair of pliers will work).
Step 1: open trunk and pull back truck liner at tail light.There is a small button clip on liner.Use screwdriver to pop up the center of button clip,pull clip out of hole.
Step 2:You will see a black wire attached to the body of car with 2 white clips.Use screwdriver to pop clips off of studs.
Step 3:Remove the nuts from the studs and pull tail light assembly straight back away from car.The outer side of the light just snaps in and out of place.
Step 4:Turn light socket counter clockwise 1/3 turn and pull out.
Step 5:Pull bad bulb straight out and replace.Reverse steps to reassemble.

Oct 24, 2008 | 2007 Nissan Sentra 2.0 SL Sedan

Not finding what you are looking for?
2007 Honda Odyssey Logo

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...