After it starts back up, I can drive it for days/weekd before the next event. No other symptoms runs GREAT til the second it dies. Then runs great the second it starts back up. Weird.
SOURCE: Sudden loss of power while driving
One thing you should notice that could tell you if the the engine is misfiring is that the check engine light will flash. If it dose it is saying you have a misfire in either one or more cylinders. If the check engine light dose not flash then it could be more of a fuel pump related issue. but as I said 1st thing would be to check the code... then i could tell you whats going on. good luck
SOURCE: 2006 pt cruiser idles high with no pcv valve hose connected
Replace the PVC valve, it's probably clogged.
SOURCE: 1999 Chrysler Concord won't start at times and dies while driving
Have somone check the timing belt make sure it has not jumped any teeth common problem on a old car with high mileage.
Testimonial: "I verified the problem was the timing belt. I thought it was the MAP sensor but turns out, timing belt was about to break, thanks."
SOURCE: sometimes it starts up and sometimes it dose not
If its a 2.5, then its likely the distributor.
SOURCE: 1998 town & country. It won't start again.
We had the same problem. It was the circuit board in the dash. There were crackes in one of the solder spots. My mechanic removed the dash and did a spot solder on the place with the cracks. It has worked for two months. It seems the solder spot was with a too cool of a solder when it was manufactured. Do it yourself or get your mechanic to fix the probem.
92 views
Usually answered in minutes!
After the initial 3 cutoffs fo my car, it stopped happening. 9 months later it did it again and a local shop replaced 2 sensors that finally showed up as a code. Perfect since.
×