Question about 2005 Chrysler Pacifica
Posted by Anonymous on
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: universal garage opener
The solution is in the owners manual.If you want to program the "homelink transmitter" in your car,you will need a remote unit for your garage door opener to do this.It is fairly easy and straightforward.I programmed my 07 Pac and it works great.Good luck!
Posted on Mar 22, 2009
if your garage motor have rolling codes you need to put your car inside garage near the motor leave ignition on go to the motor locate learn button press it then quickly go to the car and press and hold one of the buttons for approximately 30 sec or until it start blinking rapidly, if you have a regular motor take one hand held opener go inside car ignition on same time press open button on handheld remote and on the car button 30 sec and it should be programmed.
Posted on May 18, 2009
how about a real answer......
1. Press and hold the two outer HomeLink buttons, and
release only when the indicator light begins to flash (after
20 seconds). Do not hold the buttons for longer than 30
seconds and do not repeat step one to program a second
and/or third hand-held transmitter to the remaining two
2. Position the end of your hand-held transmitter 1-3
inches (3-8 cm) away from the HomeLink buttons while
keeping the indicator light in view.
3. Simultaneously press and hold both the HomeLink
button that you want to train and the hand-held transmitter
buttons. Do not release the buttons until step 4
has been completed.
4. The HomeLink indicator light will flash slowly and
then rapidly after HomeLink successfully receives the
frequency signal from the hand-held transmitter. Release
both buttons after the indicator light changes from the
slow to the rapid flash.
5. Press and hold the just trained HomeLink button and
observe the indicator light. If the indicator light stays on
constantly, programming is complete and your device
should activate when the HomeLink button is pressed
Posted on Dec 27, 2009
Sorry, the process is simple but too lengthy to post here.
They make the system and have very complete instructions you can download.
PLEASE NOTE: MOST but not ALL Brands / models of opener will work with this system.
Posted on Jul 18, 2010
Tips for a great answer:
They make the system - you can download step by step instructions.
Follow carefully if you miss anything you need to start over.
Hope this helps.
Feb 20, 2011 | 2005 Chrysler Pacifica
Jan 28, 2011 | 2004 Chrysler Pacifica
Jan 24, 2011 | 2006 GMC Envoy Denali
Jul 26, 2010 | 2004 Toyota Sequoia
Apr 06, 2010 | 2005 Chrysler Pacifica
Feb 20, 2010 | 2006 Chrysler Pacifica
Dec 29, 2009 | 2006 Chrysler Pacifica
Apr 28, 2009 | 2006 Subaru B9 Tribeca
Apr 24, 2009 | 2005 Chrysler Pacifica
Mar 08, 2009 | 2005 Chrysler Pacifica
64 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: