Question about 2000 Dodge Neon

1 Answer

When i turn the turn signals on nothing happens, when i hit the brakes the arrow shows up on the dash and the turn signal lights up outside as well. I changed the switch and the flasher and nothing is working.

Posted by on

  • Chandler Stout
    Chandler Stout Nov 09, 2012

    I have replaced the turn signal switchand the flasher with new ones from autozone. Also, thanks....but the bulbs were the first things i changed

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 7,627 Answers

Bad wiring, cross wired, short in the wiring. has the car ever been repaired?

Posted on Nov 09, 2012

  • 2 more comments 
  • Chandler Stout
    Chandler Stout Dec 27, 2012

    I've actually not had the car very long. The wiring does look all crappy. Its spliced everywhere

  • max carson
    max carson Dec 27, 2012

    Bad sign, You will need a multimeter and lots ot time to trace the wires. Someone has mucked-up the wiring. You will need a shop repair manual for your car.

  • Chandler Stout
    Chandler Stout Dec 28, 2012

    I've got diagrams for the turn signal wiring. Hopefully that works. I dont know what the guy I got it from thought he was doing.

  • max carson
    max carson Dec 28, 2012

    Take a look at this:http://www.carparts.com/details/Dodge/Ne...

×

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
wilsodfarm
  • 986 Answers

SOURCE: 1998 Dodge 2500 pickup turn signals, hazards

There is a conector box on the left side of your steering wheel on the colum loosen it and check your wires I bet when you just loosen the block they will start working,I hope this helps you

Posted on Oct 08, 2009

  • 1 Answer

SOURCE: 01 Dodge Grand Caravan dash lights go off with turn signal...

I had this problem right after I had my battery replaced. Not believing in coincidences, I took it to a friend who checked the battery and cables. Looking at the battery cables, there are small wires that attach to a thicker cable which go to the clamp that attaches to the battery terminal. The battery installer cleaned the corrosion off the clamp and the battery cable, but the connection between the small wires and the larger cable still had corrosion between them. My friend cleaned off this area, and the problem is gone.

Posted on Dec 01, 2009

Testimonial: "I did the same thing and it did fix the problem... The problem did return right before the alternator went out. Changed out the alternator... fixed!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights turn signals not working


Try turning the 4 way flasheras on and off a couple of times and see if that clears the problem.

Jun 12, 2013 | Pontiac Cars & Trucks

1 Answer

Brake/Signal Lights Problem.


Sounds like a ground problem to me. Bulbs are not getting there ground to complete the circuit so they backfed through the other bulbs.

Oct 23, 2012 | 1998 Acura RL 3.5

1 Answer

Signal and brake light problems; Indicators flash fast on dash but not outside; Emergency flashers flash normally on the dash but still nothing on the outside. Brake lights don't work. This has been an...


Replace the turn signal switch. They can be fixed if your up to it, but you have to disassemble the switch. there are parts that have to go back in the right order. Let me know. The longer you let this go , you will start to lose the headlights. All the outside lights run threw the turn switch.

Sep 21, 2011 | 2005 Pontiac Montana

2 Answers

I have a 2005 Chevy Colorado. The right rear passenger tail light will not come on, I have changed bulbs, and I have changed the entire lense assembly.Everytime you put your foot on the brake the right...


I have this exact same issue with my 05 Colorado and its so annyoying (not to mention unsafe)... I thought it was just the blub- becuase in my case my signal is no loger blinking. My break light still works, as does my parking light...

Any thoughts as to why this is happening?

Please HELP!!!

Dec 08, 2009 | 2005 Chevrolet Colorado

2 Answers

Turn signal and brake light problem


Had the exact problem on my 98 ranger 2wd reg cab stepside with the 2.5l 4 banger. Anytime I pressed the brake my passenger side turn signal would light up solid on the dash and the lights outside. I pulled both rear lights and both headlights and turn signals to check for corrosion/loose wires. Nothing. I checked and cleaned all my grounds and fuses. Nothing. Not until I followed my rear taillights wire harness did I find the problem. The two taillights are connected to each other via wire harness. My truck had the harness split with an adapter for trailer brakes. This harness was the problem. It is located under the rear bumper by the spare tire. Simply disconnect two harness plugs going into each side and remove it. Then connect the two plugs to each other. Problem solved.

1_13_2013_9_15_28_pm.jpg

Apr 09, 2009 | 1997 Ford Ranger SuperCab

3 Answers

Turning signals dont blink


Problem is the Turn Signal "FLASHER" unit, 1.Turn on Emergency FLASHERS 2. Go under Dash while they are on Listen -for Clicking sound then feel for it 3. Should Be a Silver Round Unit About as Big IN ROUND as Half dollar coin 4. ok now Look Around for the SAME EXACT Thing Clipped onto Something Under dash At Driver side Usually Between Steering wheel and Center HUMP in Floor, 5. once you find it Take OUT the first One you Found Emergency FLASHER) and 6. Put it In Place of Turn Signal Flasher, 7. Turn off Emergency Flashers- Turn Key in "ON" Position but don't start then Try Turn Signals. Yaaaa !!!! they work ?? LoL hopefully this Does the trick, if they work Buy new one and Replace Always Use NEW For TURN Signals as they are used Much More than Emergency Flashers. Hope this is Good Instructions For you and Helps you Solve The Problem, Please DONT Forget to RATE ME Thank you Rejakwilson@aol.com

Jan 18, 2009 | 1986 Oldsmobile Cutlass Supreme

1 Answer

Left turn signal


Sounds like a wiring problem . Electric is feeding across from brake light ,probably a bare place in the wiring. Check behind the tailight.

Sep 16, 2008 | 2002 Toyota Tundra

Not finding what you are looking for?
2000 Dodge Neon Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...