Question about 1998 GMC Suburban

Open Question

Oil filter housing leaking 1996 gmc 7.4 - 1998 GMC Suburban

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 7353 Answers

SOURCE: how do you get the oil cooler line loose at the

there should be 1 nut and stud holding the lines to the housing. I would suggest replacing the upper o-ring for the oil filter adapter at the same time. The oil cooler hoses are also prone to leak, if so, you want to replace evreything while you are there.

Posted on Sep 21, 2009

Ad
techbuster
  • 5081 Answers

SOURCE: where's the oil filter located on a 1996 gmc

On a 5.3 liter engine it is located just in front of the flywheek housing on the drivers side.

Posted on Apr 10, 2010

  • 1 Answer

SOURCE: 2001 GMC Jimmy 4WD leaking oil by filter

I have the same problem, any idea of how much it would cost going to a mechanic? The etal part of the line has a large slice in it from hitting the transfer case. I can't seem to get the hoses off, so I'm bringing it to a mechanic.

Posted on May 23, 2010

  • 2309 Answers

SOURCE: i have a 1998 GMC

replace the filter housing gasket, not hard to do

Posted on Oct 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil leak


if its the oil filter housing then pull the housing off and replace the gasket.

Mar 28, 2014 | 1996 Ford Mustang

1 Answer

Oil leak from oil filter housing


Hello,
  1. First check and make sure the filter is not lose.
  2. You might want to pull the oil filter and check to see if the gasket has spit or if more than one was accidentally put on during the last oil change,
  3. Should that check out there then, with the oil filter off, take and try to rotate the housing itself a bit. Just see if there is some movement. If there is then there is a nut that you can tighten up. It the nut will be on the same bolt shaft that the oil filter screws onto. Sometimes when taking off a really stuck filter the housing can come loose.
  4. There are also two hoses attached to the oil filter housing. Make sure they have not ruptured or that the clap has not failed.

A ton of pressure goes through the oil filter housing. You don't want to drive the vehicle until this is fixed because all your oil can leak out rather quick and seize your engine. Regards, Tony

Apr 13, 2011 | 1996 Land Rover Discovery

1 Answer

Audi a4 1996 engine diagram oil leaks where the oil filter screws on to, but the filter is okay. it has 2 pipes going into it what's that component called.


caller the filtre housing make sure only one o ring on it otherwise it will leak
sometimes old o ring stays in housing ,and filtre leaks because 2 orings

Mar 09, 2011 | 1996 Audi A4

1 Answer

The seal on the oil filter housing is leaking


YOU NEED TO REPLACE OIL FILTER SEAL IF YOU OIL FILTER ON TOP OF ENGINE.IF OIL FILTER ON BOTTOM ENGINE LEAKING YOU HAVE TO REPLACE OIL FILTER WITH NEW OIL SEAL.

Feb 12, 2011 | 1996 Volkswagen Jetta

1 Answer

I have a 1988 GMC safari. Replace oil filter twice but oil still running down the filter. My guess is that the adapter that the filter spins onto is leaking between "it" and the block. I...


Make sure the seal from the old filter is not still stuck on the housing. If it is it will leak for sure. I always smear some oil on the new filter seal before putting it on. I also fill the new filter with oil.

May 21, 2017 | 1998 GMC Safari

1 Answer

Where's the oil filter located on a 1996 gmc sierra 4x4 ?


On a 5.3 liter engine it is located just in front of the flywheek housing on the drivers side.

Apr 10, 2010 | 1996 GMC Sierra

1 Answer

How do you get the oil cooler line loose at the filter housing to replace the o ring on that line on 4x4 1996 gmc k1500


there should be 1 nut and stud holding the lines to the housing. I would suggest replacing the upper o-ring for the oil filter adapter at the same time. The oil cooler hoses are also prone to leak, if so, you want to replace evreything while you are there.

Sep 21, 2009 | 1996 GMC Sierra

1 Answer

Oil leaking from assembly that oil filter attackes to.


is the filter tight? did someone forget to remove the old filter O ring gasket? that is more common than u think, check it before u spend at least $100-150 on the housing.

Mar 10, 2009 | 1996 Acura SLX

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...