Question about 2008 Chevrolet Impala

Open Question

Were is the door lock relay on a 2008 impala - 2008 Chevrolet Impala

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bluebirdmate
  • 1190 Answers

SOURCE: The left rear door lock

Hello: The lock/unlock unit is part of the mechanical door lock assembly. The first thing to do is remove the door panel. Check and make sure the linkages are all connected, then make sure the wires are properly connected to the door lock assembly. If all the previous is ok then you will need to replace the lock/unlock assembly. to do this you need to remove the mechanical lock assembly first then remove the actuator. It might be best to have a professional accomplish this task. You also should disconnect the actuator an check to make sure you have 12v going to the actuator when you activate the door lock switch.

Posted on Jan 14, 2011

  • 335 Answers

SOURCE: back driver door won't lock

Hello, this is caused by a bad door lock actuator. the door lock actuator is part of the door latch. the door latch will need to be replaced to correct this problem.

  • Remove the rear door outside handle. .
  • Remove the interior trim panel.
  • Remove the water deflector


  • mrtechwrench_23.gif

    Posted on May 30, 2011

    emissionwiz
    • 75822 Answers

    SOURCE: any silent recalls on 2008 chev impala rear power door locks

    There is no such thing as a silent recall, who told you that? A recall is safety related, on the other hand there are TSB's which are factory fixes for problem areas in the design of the vehicle. I see no TSB for the locks listed.

    Posted on Sep 24, 2012

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    2008 Chevy Impala LTZ: car wont lock or unlock with the power lock/unlock buttons on the remote or car door. It makes a clicking sound though when I attempt to. Is this a blown fuse? Or something else


    Where do you here the clicking sound ? in the door , behind instrument panel ? I don't think a blown fuse would do this , possibly a relay ! do you know what a relay is ? This is Chevy factory service information !
    Door Lock Operation
    When the body control module (BCM) detects a transition of either of the door lock switches to the lock position, it switches the door lock actuator lock control circuit to voltage. Since the lock actuator unlock control circuits are at ground potential within the BCM, the door lock actuator motors transition to the lock position.
    There are three pcb relays integrated into the instrument panel fuse box ( non replaceable ) door unlock pcb relay drivers door -door unlock pcb relay an door lock pcb relay ! The BCM controls these relays ! Do you know what a BCM is ?
    Circuit/System Description
    The DR/LCK fuse supplies battery positive voltage to the I/P fuse block for the door lock system. The body control module (BCM) supplies and monitors a reference voltage to the door lock switch through the door lock switch lock/unlock signal circuit. The door lock switch also receives a constant ground source. If a door lock switch is placed in the lock position or unlock position, the reference voltage is taken directly to ground and the BCM detects the voltage drop on the signal circuit.
    The BCM, upon receipt of a door lock switch lock or unlock signal, will switch the appropriate door lock actuator control circuits to battery positive voltage. The opposing side of the door lock actuators are connected to ground internally within the BCM through the other door lock actuator control circuit and the doors will lock or unlock appropriately.
    With out have a factory GM tech 2 scan tool ,It would be best if you took this to a Chevy dealer . The first part of diagnosing this problem is to hook up a scan tool !

    Wiht
    There
    How to test computer controlled door locks

    Aug 25, 2015 | Cars & Trucks

    2 Answers

    2011 chevy impala doors wont lock


    Check the fuse. not sure which one, but your owner's manual will have a drawing of the fuse panel with a list of what each fuse feeds.

    Apr 13, 2014 | 2011 Chevrolet Impala

    1 Answer

    Any silent recalls on 2008 chev impala rear power door locks


    There is no such thing as a silent recall, who told you that? A recall is safety related, on the other hand there are TSB's which are factory fixes for problem areas in the design of the vehicle. I see no TSB for the locks listed.

    Sep 24, 2012 | 2008 Chevrolet Impala

    2 Answers

    2008 chevy impala rear locks only work partially


    I have problems with all door locks. Some work some others don't. Or right side of the car won't lock or unlock. Or the left side won't unlock or lock. Or they all work great . When it's very hot outside none will or will.What's the problem.

    Sep 09, 2011 | 2008 Chevrolet Impala

    1 Answer

    Back driver door won't lock or unloc without manualy doing . 2008 chevy impala


    Hello, this is caused by a bad door lock actuator. the door lock actuator is part of the door latch. the door latch will need to be replaced to correct this problem.

  • Remove the rear door outside handle. .
  • Remove the interior trim panel.
  • Remove the water deflector


  • mrtechwrench_23.gif

    May 29, 2011 | 2008 Chevrolet Impala

    1 Answer

    The left rear door lock on my 2008 Impala LT will not lock and unlock with the remote control. All others work ok. Can only operate left read lock manually.


    Hello: The lock/unlock unit is part of the mechanical door lock assembly. The first thing to do is remove the door panel. Check and make sure the linkages are all connected, then make sure the wires are properly connected to the door lock assembly. If all the previous is ok then you will need to replace the lock/unlock assembly. to do this you need to remove the mechanical lock assembly first then remove the actuator. It might be best to have a professional accomplish this task. You also should disconnect the actuator an check to make sure you have 12v going to the actuator when you activate the door lock switch.

    Jan 14, 2011 | 2008 Chevrolet Impala

    1 Answer

    Popping sound from near glove box in dash in 2008 Impala


    This is the location of your BcM or Body control Mod. This controls all the things you are talking about. Lights, flashers,door locks trunk lock, that clicking you are hearing is a relay turning something on. So Lets say you are driving and it starts to get dark your BcM will change your driving lights to full night time mode, turning lights on, on your dash. Now you have Bright and dim functions. There is a sensor in the dash up front in the windshield that senses dark/light and does this. That is what you hear, a relay in your BcM clicking off/on some function of the car.

    Aug 13, 2009 | 2008 Chevrolet Impala

    2 Answers

    2001 Chevrolet Impala Door Locks Suddenly Quit Working


    Passenger side of the fender under the hood - check the fuse relay box - about $12.00 a piece - they do go bad from time to time.
    exchange the power lock relay with another one and test the locks.
    then put the relay back and go to the autostore.

    Aug 07, 2009 | 2005 Chevrolet Impala

    1 Answer

    2001 Impala -- Auotmatic Door Locks Stopped Working


    also check under the hood in your power distribution box to see if there is a relay for this .. under the lid of this box tells you which relay is which.. thanks and holler if you need more Jerry

    May 05, 2009 | 2005 Chevrolet Impala

    1 Answer

    Fuse for locks constantly blows


    Try replacing the relay. Clean the socket of the relay and fuse

    Feb 09, 2009 | 2003 Chevrolet Impala

    Not finding what you are looking for?
    2008 Chevrolet Impala Logo

    Related Topics:

    223 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8210 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...