Question about Cars & Trucks

Open Question

Diagram rear brake assembaly 1981 oldsmobile cutlass

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
c17hydro
  • 2984 Answers

SOURCE: How to remove rear calipers

  1. Raise and safely support the vehicle.
  2. Matchmark the relationship of the wheel to the axle flange. Remove the wheel and tire assembly.
  3. Reinstall two lug nuts to retain the rotor.
  4. If the caliper is being removed from the vehicle for replacement or overhaul, perform the following:
    • Disconnect the brake hose from the caliper. Plug the opening in the caliper and the brake hose to prevent fluid loss and system contamination.
    • Detach the parking brake cable by lifting up on one end of the cable spring clip to free the end of the cable from the lever.
  5. Remove the bolt and washer attaching the cable support brake to the caliper body assembly.
  6. Remove the sleeve bolt, then remove the caliper body assembly. Pivot the caliper body up to clear the rotor and then slide it inboard off the pin sleeve.
  7. If the caliper is being removed for shoe and lining replacement or to provide access to the support bracket, rotor of wheel brake components, hang the caliper from suspension using a suitable wire hook so as not to stretch or damage the brake hose or brake cable.
  8. Inspect the pin boot, bolt boot and sleeve for cuts, tears or deterioration. If damaged, replace the boots.
To Install:
  1. Install the caliper assembly, as follows:
    • If not replaced, remove the pin boot from the caliper body assembly and install the small end over the pint sleeve (installed on the caliper support) until the boot seats in the pin groove. This is to prevent cutting the pin boot when the sliding body assembly onto the pin sleeve.
    • Hold the caliper body assembly in position it was removed and start over the end of the pin sleeve. As the caliper body assembly approaches the pin boot, work the large end of the pin boot in the caliper body groove. Then push the caliper body fully onto the pin.
    • Pivot the caliper body assembly down, using care not to damage the piston boot on the inboard shoe. Compress the sleeve boot by hand as the caliper body move into position to prevent boot damage.
    • After the caliper body assembly is in position, recheck the installation of the pad clips. If necessary, use a small prytool to re-seat or center the pad clips on the support abutments.
  2. Install the sleeve bolt and tighten to 20 ft. lbs. (27 Nm).
  3. Fasten the cable support bracket (with the cable attached) with the retaining bolts and washer. Tighten to 32 ft. lbs. (43 Nm).
  4. If disconnected, attach the end of the parking brake cable to the parking brake lever by lifting up on the end of the cable spring clip and work the end of the parking brake cable into the notch in the lever.
  5. Unplug and attach the brake hose, if it was disconnected.
  6. Remove the two lug nuts retaining the rotor.
  7. Install the wheel and tire assembly, aligning the marks made during removal.
  8. Carefully lower the vehicle, then bleed the brake system if the brake hose was disconnected.
  9. Firmly depress the brake pedal 3 times to seat the pads against the rotors.

Posted on Jul 12, 2009

Ad
  • 1 Answer

SOURCE: rear brake lights don't work on 1996 Oldsmobile Cutlass Supreme

believe it or not your problem is quite common. you need to replace the turn signal switch. it is located in the steering collum beneath thr air bag. it is not an easy job. better to have a mechanic do it

Posted on Jul 20, 2009

fknstart
  • 404 Answers

SOURCE: How do you remove the rear brake caliper on a 1995

undo the small bolts holding the brake pad housing remove pads .undo the larger 2bolts retaining the calipers then remove ,, not when changing disks you should repack your bearings,

Posted on Oct 23, 2009

  • 1 Answer

SOURCE: changing the rear brakes on a 97 oldsmobile cutlass supreme

use a pair of pliers.put each side of the jaws of the pliers in one of the V-grooves of the piston and turn clockwise whle pushing it in

Posted on Nov 04, 2009

arauzvictor1
  • 466 Answers

SOURCE: 1986 Oldsmobile Cutlass Supreme vacuum hose

Ok sent you this the engine you have to specify that engine has to help you. Thanks2c36ea6.jpg

Posted on Mar 24, 2010

Testimonial: "good job getting info. and real quick too"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 oldsmobile cutlass fuse box diagram


On this website, you find fuse box diagram and description for Oldsmobile Cutlass Supreme (1995)

Oldsmobile Cutlass Supreme 1995 fuse box diagram Auto Genius

Feb 26, 2012 | 1995 Oldsmobile Cutlass Supreme

1 Answer

Rear brake shoes installation


Check out this link: http://www.autozone.com/autozone/parts/1995-Oldsmobile-Cutlass-Ciera/Brake-Shoes-Rear/_/N-j1n9aZ8ko2c

Hope it helps you...if you need further assist. contact me; over4dy@yahoo.com

Sep 13, 2011 | 1995 Oldsmobile Cutlass Ciera

1 Answer

Where is the brake bleeder on a 1995 oldsmobile cutlass supreme?!?!


you have 4 of them 2 in front / 2 in back . 2 in back are on the brake backing plate 1 bleeder on each side. 2 in front 1 bleeder on each side on the caliper. when bleeding start with rigth rear left rear front rigth frontleft . check master cylinder fluid level while bleeding. keep full of fluid

Nov 12, 2010 | 1995 Oldsmobile Cutlass Supreme

1 Answer

Cant get the caliper in the rear brakes to go in on my 1993 oldsmobile cutlass supreme while changing the brakes...


They may screw in instead of compress, if they do you need a special tool that you can buy at a parts store for $10 to $20 bucks.

Nov 02, 2010 | 1993 Oldsmobile Cutlass Supreme

1 Answer

I need to know if i need a new headlight switch or if i need a fuse replaced, but i need a diagram of the fuse panel.


The fuse block on all models is located under the left hand side of the instrument panel. All flashers are mounted on the fuse block. Each fuse is marked on the fuse block as to which circuit it is protecting. Some early models also use an in-line 30 amp, fuse for the air conditioning hi-blower, located at the cowl relay and an in-line 10 amp, fuse for power antennas.

Check this diagrams...

3924055.jpg

Fig. 19: Chassis wiring - 1981-83 Cutlass


c7ba420.jpg

Fig. 20: Chassis wiring - 1981-83 Cutlass continued



Hope this help.

Mar 11, 2010 | 1983 Oldsmobile Cutlass Supreme

1 Answer

How do you remove the rear brake caliper on a 1995 oldsmobile cutlass supreme so I can replace the disk and install new brake pads?


undo the small bolts holding the brake pad housing remove pads .undo the larger 2bolts retaining the calipers then remove ,, not when changing disks you should repack your bearings,

Oct 23, 2009 | 1995 Oldsmobile Cutlass Supreme

1 Answer

93 Oldsmobile Cutlass


check for a crossed filament in the brake lamp bulbs on the right side. have seen this many times before- usually at 5:00 on fridasy when i was on the way out the door
good luck

Aug 17, 2008 | 1993 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...