Question about 2004 Ford Explorer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I believe the fuse for your starter is in the power distribution box, 93 explorer 4.0L 4X4. find diagram for this in Chilton Ford Ranger/Explorer/Mountaineer 1991-1999 Repair Manual 26688 page 6-43 Fig.88 Be aware that there are (4) figures for the 93 4.0L explorer and each shows a different part of the same engine wiring. See top right 'power distribution box' follow lines to the part of your engine you are concerned with, which fuse number, then look inside your engine, passenger fender, push down on the protective ?wall then pull the cover up, see your diagram and fuse numbers. The diagram for inside fuse box, page 6-31 fig.63 I hope this helps
Posted on Jul 26, 2008
The one with the turnsignal intergrated into it?
Push the Mirror FORWARD, up close to the pivot poit there is a small torx head screw - unscrew that.
At the tapered end carefully pull/pry down. That end has a small metal spring clip that holds it up, be careful with it, if it snaps, you can NOT by a new one...
Posted on May 18, 2009
Go to any glass shop, they'll cut a new mirror and glue it on top of the old one. Much cheaper than replacing the whole unit (hundreds).
Posted on Jun 10, 2009
Aside from the fuses, your drive side power door lock may be failing to work because of a bad door-lock relay system, or, alternatively, the locking switch/button, itself, is not malfunctioning and in need of replacement.
A great handyman site that specifies the above probable causes and more is the following link:
Posted on Jul 18, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
Tips for a great answer:
Nov 15, 2016 | 2007 Mercury Mountaineer
Jun 21, 2015 | 2004 Ford Freestar
Oct 10, 2009 | 2004 Ford Explorer
Jul 18, 2009 | 2002 Ford Explorer
Jun 10, 2009 | 2004 Ford Expedition
May 10, 2009 | 2003 Ford Expedition
183 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: