Question about 2006 Buick Terraza
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you will need to check the fuses first and if they are okay. then take a test light and check the switch for the power seat itself and see if you are getting power to and from the switch. if all is okay check power at connector for heated seat and if all is okay the heat is bad or it maybe the switch i have seen both. good luck
Posted on Dec 26, 2009
The bright light fitting is the same as the dim so take it apart fist to see how the cover screws off/on and the light comes out. Both the cover and the bulb are removed by a standard twist to the counterclockwise and replaced by a twist to the clockwise. Now to the dim light. You have to release the entire light assembly before you can remove the screw-on cover to reach the light. On the rear edge of the light unit closest to the engine is a white locking tab. Pull that tab up just to the point where it releases…pull too far and it locks again. Next, locate the other locking bracket which is a metal bracket in the center-rear of the light assembly. This bracket is held down by a screw. Remove the screw with a 10mm wrench. Lift the bracket just like you did the white bracket. You should now be able to pull (or pry) the entire light unit forward a little. Depending on the size of your hands this might be enough. If not, then you need to release the plastic bumper assembly to give you a little more space. This is done by removing two expansion locking pins, one that holds the little plastic strip down between the bright and dim lights and one that is located inside a rubber bumper on the engine side of the light unit. To remove these locking pins, pull or pry up the little tab in the center of the pin just like you were pulling a nail by the head. That should give you more space.
Posted on Apr 03, 2010
Tips for a great answer:
Jan 12, 2015 | Buick Cars & Trucks
Jan 21, 2013 | 2006 Buick Terraza
Apr 06, 2012 | 2006 Buick Terraza
Oct 18, 2010 | 2005 Buick Terraza
Aug 14, 2010 | 2006 Buick Terraza
Jun 21, 2010 | 2006 Buick Terraza
Jan 17, 2010 | 2006 Buick Terraza
Dec 01, 2009 | 2006 Buick Terraza
Jul 31, 2009 | 2006 Buick Terraza
Aug 10, 2017 | 2006 Buick Terraza
111 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: