Question about 1999 Chevrolet Express

Open Question

Fuse keep blowing when i use power lock what do i check

Fuse for the power door lock keep blowing when i push lock

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Security Light always on, door lock fuse keeps blowing

This is most likely a problem with your Passlock anti-theft system which is known issue with these cars. Passlock is a "passive" anti-theft system, which means that it will disable your ability to start the car if it thinks there is a problem. The three components that can cause this are: 1) Ignition Switch, 2) Ignition Cylinder, 3) Body Control Module (computer). The dealer is the only one who can solve this problem (unless you can bypass it, but it is not that easy). Estimated repair from most dealers is $800 and up.

Posted on Dec 02, 2008

raycrazek
  • 106 Answers

SOURCE: keep blowing out auto door lock fuse

after you replace the fuse try closing the door and put the key in and turn it back and forth locking and unlocking it and see what happens when you use the power lock
ray

Posted on Jan 19, 2009

  • 206 Answers

SOURCE: fuse for locks constantly blows

Try replacing the relay. Clean the socket of the relay and fuse

Posted on Feb 17, 2009

  • 118 Answers

SOURCE: passenger windows/ power seats fuse keeps blowing

Check the seat wiring harness below the seat and under the carpet. Water and moister will cause it to rust and break the wires or short them out. The windows and power seat require the use of a circuit breaker, this is recommended.

Posted on Jul 20, 2009

InMrFixIt
  • 121 Answers

SOURCE: Fuse to suburban cigarette lighter/power locks keeps blowing.

Unplug cigarette lighter, check circuit, unplug each door individualy at first, Don't forget the back doors, check circuit. Usualy the door wiring is damaged but there may be more then two cigarette lightes depending on the model.

Posted on Dec 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does the fuse immediately blow on my power door locks? how to fix this?


You have a short somewhere in the system. Maybe one of the lock actuators or a switch. To test disconnect all locks and switch then replace fuse if don't blow start with driver door and reconnect lock check fuse see if it blew if not reconnect switch active lock check fuse see if ok. Continue with each door separate using same steps until fuse no good you will have found short. Replace shorted part.

Apr 30, 2016 | Cars & Trucks

1 Answer

Fuse on lighter keeps blowing


Question did u buy used? Have you checked that the fuse and the CIG lighter right for vehicle and 3 any after market electronics in dash. Stereo CD DVD etc? Before I answer.

I have to put number 2 fuse in to open back hatch power lock. All the other power locks work for doors without it not rearchatch. But its the horn so.... My horn blows and its not thevhorn relay in glove compartment because it blows. Its the padding that's gone in steering wheel.

Jul 11, 2014 | 2005 Chevrolet Silverado 1500 2WD

1 Answer

Jeep keeps blowing fuse


You have a dead short and yes it could be in one of the door lock switches, figure out which one is blowing the fuses and take it out, might just have a wire that came loose in the back and is causing it to short out when you hit the switch button.

Jul 07, 2014 | 1996 Jeep Cherokee Country

1 Answer

M38 fuse keep blowing


the parts are shorted, the FUSE stops the fire. and flames.
we fix this buy isolating the shorted part.
we do that with an ammeter. (there are other ways, ask)
i see the ammeter prove short then
i try each door manually , 1 by one form the local door switch lock
to see if one door blows the fuse when activated.
BINGO, so then unplug that door lock solenoid, still blow the fuse
(i use a fuse substitute device (sold in all good auto-stores) called a fuse, circuit breaker converter)
lock sol, removed, still blows?, yes? then harness shorts, (hard work)
if Sol, pulled cures over-current, its bad. a shorted soleniod.

there are other ways, ill just list them.
no ammeter?
no C-Breaker.?
  1. use a light bulb in place of fuse. (i use a head light in a box)
  2. a current limited power supply in place of fuse. (see over current)
  3. Pul all parts, 1 by one on this bad line and a box of fuses.
there are 4 ways.
I always use an amp clamp meter on the line
and the circuit breaker trick.
then pull parts. and conn. on the bad feed. (lots there are)

that's it, for shorts.

Mar 09, 2014 | Jeep Liberty Cars & Trucks

1 Answer

Fuse 129 keeps blowing x5


The warning light may not have been reset, door lock actuator bad creating a short - blowing fuse, or bad switch.

Dec 13, 2013 | BMW X5 Series Cars & Trucks

1 Answer

Fuse to suburban cigarette lighter/power locks keeps blowing.


Unplug cigarette lighter, check circuit, unplug each door individualy at first, Don't forget the back doors, check circuit. Usualy the door wiring is damaged but there may be more then two cigarette lightes depending on the model.

Dec 29, 2009 | 1990 Chevrolet Suburban

1 Answer

None of the power door lock switches work.


Have you checked the wires between the doors and body, they will break in time, and yours is a year where they could be broken now, they don't last forever.. that will cause the fuse blowing, and the locks not working.
Check all doors, but most likely the Drivers door or Passenger door will be the culprit......

Sep 15, 2009 | 1994 Pontiac Grand Prix

1 Answer

2002 Dodge Ram 1500 power door locks keep blowing fuse


by process of elimination!
one door at a time so disconnect 3 & keep changing the active one till you find which one isnt working
then test its circuits ok
Cheers rob.

Jul 20, 2009 | Dodge Ram 1500 Cars & Trucks

1 Answer

2003 ford escape, fuse keeps blowing for door locks, radio and dome light. y


check for a shorted to ground positive wire repair as nesseacry

Jun 01, 2009 | 2003 Ford Escape

2 Answers

Keep blowing out auto door lock fuse


You have a short Somewhere. Check inside the Door where the Harness goes into the Doors. It is the Black Flex duct that looks like a Vacuum hose.

Jan 19, 2009 | 2004 Chevrolet Blazer

Not finding what you are looking for?
1999 Chevrolet Express Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...