Question about 2001 Ford Expedition

Open Question

MY 2003 LINCOLN NAVIGATOR CONTINUES TO DIE OUT WHIE i AM DRIVING, AFTER APPROXIMATELT 1-5 MINS IT WILL RESTART IS IT THE SMART JUNCTION BOX OR THE CENTRAL JUNCTION BOX? OR ARE THEY BOTH THE SAME?

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
mcgyver468
  • 710 Answers

SOURCE: can't find central junction box

Under the steering wheel are two plastic screws. Turn them one quarter turn counter-clockwise. Pul the panel away from the dashboard. And your there.

Posted on Apr 25, 2009

Ad
  • 106 Answers

SOURCE: drive for 1 mile dies wait a few min. starts

This may be a theft deterrent system issue. Is the ignition key you are using original? If not, try the original. If it is, there may a malfunction in the ECM. Some vehicles will start with non-dealer keys, but will shut off automatically if the computer fails to read the chip in the key within a certain time. Of course it could also be a problem with the ECM overheating or a faulty fuel pump relay.

Posted on Feb 02, 2010

clifford224
  • 1975 Answers

SOURCE: I need a 2002 ford windstar central junction box

I;m guessing when you say juntion box you are talking about the power distribution box/fuse box located in the engine compartment. These are the diagrams that I have given you below. this should be in your owners manual if you have one. If you don't and would like a copy, you can email me at csautomotivecars@att.net with your make, model and year and I will be happy to email you a copy. I hope this helps and good luck.


clifford224_397.gifclifford224_398.gifclifford224_399.gifclifford224_400.gifclifford224_401.gif

Posted on May 07, 2011

emissionwiz
  • 76109 Answers

SOURCE: 2000 ford expedition central junction box lotation

It is under the hood near the battery.

Posted on Oct 22, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Navigator Lincoln Navigator the locks keep locking and unlocking


Faulty input to smart junction box . Door ajar switch . or the module has internal problem . Do you know how to do automotive electrical testing ? How to use a DMM - digital mutimeter , read an use a wiring diagram to find test points in a electrical circuit ? Have a factory or professional type scan tool to check for DTC'S an view input's to the control module in charge ? The Trainer 29 Understanding How Electrical CIrcuits Work and How to Test...
Electric Testing Techniques You Need to Know
The electronics on your vehicle are complex , above most people's skill level to even mess with ! There are no magical fixes for these type problem's , need to do testing .

Apr 22, 2017 | Lincoln Cars & Trucks

1 Answer

Where is my fuse box to my 2003 Lincoln Navigator under the hood


Central Junction Box (CJB) (14A068) C270A
under dash panel, RH side

Oct 17, 2016 | Lincoln Cars & Trucks

1 Answer

What color is the power wire to my radio in a Lincoln ls 03


ORG/BLK wire from 20A FUSE 18 in central junction box. If there is navigation, there will be GRY/ORG wire from 5A FUSE 2 in the battery junction box.

Sep 14, 2016 | 2003 Lincoln LS

1 Answer

2007 Lincoln Navigator Turn signal relay location?


It doesn't have one Controlled by smart junction box .
The smart junction box (SJB) monitors the multifunction switch position by sending multiple voltage reference signals to the multifunction switch. When the multifunction switch is in the LH or RH TURN positions, or the hazard lamp switch is pressed, that input signal is routed to ground.
When the SJB receives a request for a turn signal or hazard lamps, the SJB supplies voltage to the appropriate turn lamps.
The timed on/off cycle is determined by the SJB and is set to flash approximately 80 times per minute if both the front and rear turn lamps operate correctly. If an individual turn signal lamp is inoperative, the SJB flashes the remaining turn lamp approximately 160 times per minute.

Mar 28, 2016 | 2007 Lincoln Navigator Ultimate 4x4

1 Answer

2006 Lincoln Navigator 12 volt auxiliary outlets have no power?


F 1 . 39 20amp. location central junction box . under dash panel Right side .

Oct 15, 2015 | 2006 Lincoln Navigator

2 Answers

How meny fuse control the driver side window


1 circuit breaker and 2 fuses
Circuit Breaker #601--30Amp--in Battery Junction Box
Fuse 103--50Amp--in Battery Junction Box
Fuse 14--15Amp--in Central junction box
Multiple Relays and Modules Involved--if circuit breaker and both fuses good, diagnostic scanner use indicated.

Mar 14, 2014 | 2001 Lincoln Navigator

1 Answer

When i slow down my 2003 navigator the engine dies


IAC (idle air control) not maintaining idle target4_8_2012_7_13_03_pm.jpg

Apr 08, 2012 | 2003 Lincoln Navigator

2 Answers

Where is the smart junction box located and what does it control?


The 2003 Expedition smart junction box was formerly called a GEM module in previous years. It has relays that control your keyless entry codes, the relays that control the dome lights and the delayed radio shutoff as well as other functions.

On a 2003 Expedition, the sjb (smart junction box) is located on the inside passenger's side kick panel below the glove box. It is most easily accessed by opening the glove box and squezzing the limiting tabs on each side so the glove box can open fully and tilt forward. It is approximately 6" long by 4" tall and about 1 3/4" thick. The part number on the label will be 2L1T-15K602-AN or similar for 2003 Expeditions.

Nov 02, 2011 | 2003 Ford Expedition

1 Answer

Passenger headlight don't work 2003 lincoln navagator


high beam or low beam? or both of them on one side.

  • One low beam headlamp is inoperative
  • Central junction box (CJB) fuse 23 (10A) (RH headlamp).
  • CJB fuse 25 (10A) (LH headlamp).
  • Circuitry.
  • CJB.
  • Go To Pinpoint Test C .


  • One high beam headlamp is inoperative
  • Circuitry.
  • Headlamp assembly.
  • Go To Pinpoint Test D .

  • The high and low beam headlamp is inoperative on one side
  • Circuitry.
  • REPAIR ground circuit 57 (BK).


  • Headlamp switch
  • Multifunction switch
  • Vehicle Security Module
  • Central junction box (CJB) fuse(s):
    • 17 (15A)
    • 23 (10A)
    • 25 (10A)
    • 35 (20A)
    • 40 (20A)
  • Circuitry
  • Headlamp bulbs
  • Daytime running lamp (DRL) relay



Apr 19, 2009 | 2003 Lincoln Navigator

1 Answer

2003 Lincoln Navigator will not shift from all 4wheel drive into 2wheel drive


this is common on these trucks just put your witch in 2 wheel and go ahead and drive it will let loos when it sees the correct secquence and drive a little and shift to netural.
just neve do it from high to low range

Sep 18, 2008 | 2003 Lincoln Navigator

Not finding what you are looking for?
2001 Ford Expedition Logo

Related Topics:

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...