Question about 1994 Chevrolet K1500

1 Answer

Command start will not work

I recently changed a dead battery and now the command start won't work. What's up with that?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 328 Answers

The remote probably needs to be reprogrammed.........if you could give manufacturer name and model number i could find some instructions for you.....or if you have it refer to your owners manual for the starter
hope this helps!

Posted on Jan 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset my command start


Disconnect battery five minutes
This is standard procedure to restart

Nov 09, 2014 | 2000 Dodge Caravan

1 Answer

How to reset command start in a 2009 sportage kia


use a code reader to reset the CPU. Use care when jump starting as the power surge will damage the CPU and program

Dec 17, 2013 | Kia Cars & Trucks

1 Answer

My 2008 taurus command start won't start my car, how do I fix it?


was the battery ever disconnect or did the battery dead

Dec 02, 2012 | 2008 Ford Taurus

2 Answers

Astrostart won't start the car


You may need to reset the system.

SEQUENCE ACTIVATED BY THE PARKING BRAKE .
1. While engine is running (key in ignition switch), apply the brakes and hold the pedal down.
2. Move gearshift lever to neutral.
3. Apply the parking brake Once Twice
Note: The system can be set - at time of installation - to require that the parking brake be applied once or twice.
If set for two actuations, pause one second between the two.
4. Remove key from ignition (the system keeps the engine running).
5. Exit the vehicle.
6. Within 60 seconds, close all doors.
7. The system will stop the engine and blink the parking brakes once to confirm the sequence is valid (vehicle is
ready for a remote start command).
SEQUENCE ACTIVATED BY THE REMOTE CONTROL
1. While engine is running (key in ignition switch), apply the brakes and hold the pedal down.
2. Move gearshift lever to neutral.
3. Apply parking brake.
4. Send the start command (Model 801 & 2101 - Model 903 ).
5. Remove key from ignition (the system keeps the engine running).
6. Exit the vehicle.
7. Using the remote, send the STOP command. The system will stop the engine and parking lights will blink once
to confirm that the sequence is valid (vehicle is ready for a remote start command).
http://www.astrostart.com/Support/Guides.aspx

Nov 27, 2012 | Cars & Trucks

1 Answer

Command system fuse


check for polarity at the battery check for power at the radio they may have damaged this circuit

Aug 31, 2012 | Mercedes-Benz E-Class Cars & Trucks

1 Answer

My 93 dodge akota has a high rpm idle and fault codes 12 and 25 any answers


code 12 tells you that the battery has been disconnected recently or it went dead .. code 25 is for the automatic idle speed motor (AIS)... it did not respond to the computers command for speed change .. the AIS motor can be bad or frozen .. thats mounted on the throttle body. you can try lubing it ..
here is more info if you need it:
http://www.allpar.com/fix/codes/faults/code-25.html

Dec 31, 2009 | 1993 Dodge Dakota

1 Answer

Battery went dead in car now command start will not work


that should not affect the electric start make sure no wires got knocked off or forgot to put back on battery.

Nov 29, 2009 | 2004 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...