Question about 2004 Pontiac Grand Am
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the fuel pressure regulator is on the end of the fuel rail it is held on by a torx screw relieve the fuel pressure using the schrader valve on the fuel rail remove regulator holding screw and replace new regulator be carful not to damage o-rings on new regulator
Posted on Nov 02, 2008
first look underneath the hood... is it there on a sticker... if not i'll need the size of the motor to let you know
Posted on Jan 27, 2009
It's under the hood, on the driver's side, under a square, black box with a lightning symbol on it. Loosen the flower-shaped screw that holds the lid of the box down, remove the lid, flip it upside down and when you look at the inside of the lid, you'll see a map of all your car's fuses. There's also a fuse diagram on the very end of the dash, but it's accessible only when you open the driver's side door. When you're driving, that end of the dash is blocked by the closed door.
Posted on Jul 01, 2009
Hello! To check the fluid level, the first thing you want to do is get the fluid to operating temperature, by driving it for a bit and letting it shift through all gears. Once you've done that you need to make sure you park the car on a very level surface. Remove the front passenger wheel and the splash guard. From there reference the picture below to give you an idea where the fluid check plug is located - there is no dipstick on this transmission (4T45e). You will also see the fill plug location.
If you do a pan drop and filter replacement only, the fill capacity is 6.9 quarts. You will want to use Dexron III type transmission fluid.
FYI - here are the torque specs for the pan bolts is 106 in/lbs and the check/fill plugs are both 124 in/lbs.
Hope this helps and good luck!
Posted on Sep 25, 2009
Testimonial: "i already found the info, but the answer is 100% cinsistant with the info i researched. thank you!!!! "
Tips for a great answer:
Oct 23, 2010 | 2004 Pontiac Grand Am
Jun 21, 2010 | 2004 Pontiac Grand Am
May 29, 2010 | 2004 Pontiac Grand Am
May 21, 2010 | 2006 Pontiac Grand Prix
Apr 21, 2010 | 2004 Pontiac Grand Prix
Jan 05, 2010 | 2004 Pontiac Grand Am
Nov 09, 2009 | 2004 Pontiac Grand Am
Jun 20, 2009 | 2004 Pontiac Grand Am
144 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: