Question about Honda Odyssey

Open Question

2008 Rear wiper arm hangs down on 2008 Honda Odssey

WIper arm hangs down does not cycle

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

polarcycle
  • 1392 Answers

SOURCE: How to remove rear wiper arm

Remove the nut holding the arm. Should be able to lift up on the arm and loosen the joint at the motor.

Posted on May 30, 2009

  • 85 Answers

SOURCE: How do I replace the rear wiper arm on a 2008 Kia Sedona

Your wiper arm has an interference fit which means it is essentially pressed on. The best way to remove it is to buy a wiper arm puller, which will have two arms that fit underneath the arm and a bolt that will push on the wiper post, they are pretty slick it should pop right off. Any auto parts store should be able to furnish you with the tool. If you're not going to use it alot, you might call your dealership (or friend with lots of tools) and see if they will pop it off for you.

Posted on Dec 07, 2009

gripfitter
  • 557 Answers

SOURCE: The arm on my rear wiper does not move.

remove the arm to see if the motor turns. Look inside where the arm mounts, is the inside worn out?

Posted on Dec 23, 2009

  • 151 Answers

SOURCE: Can't remove rear wiper to replace on 96 caravan

Lift wiper arm from rear window. then release latch that holds the blade to the wiper arm.( It's small tab)

Posted on Jan 27, 2010

kennyz195
  • 61 Answers

SOURCE: replace rear wiper arm

there is a cover at the base lift it up and then you have a nut. 10mm remove this and pull off the arm. sometime they get stuck and you will have to pry it up.

Posted on Apr 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove the rear windshield motor wiper?


If after all this time you still need to replace the back wiper.
There is a plastic lever where the wiper attaches to the arm.
Squeeze this lever against the metal wiper arm, while pushing
the wiper blade towards the base of arm. It should unhook
the blade from the wiper arm.
Good luck.

Mar 11, 2015 | 2008 Chevrolet Equinox LS

1 Answer

Rear wiper blade disconnected...how do we fix?


Have to remove the wiper arm & see if the splines are
damaged & if the motor works as it should
There are no easy vehicle fixes
You have to understand how something works & then
diagnose why it doesn't & make the repair
If you get lucky she only ruined the wiper arm &
not the motor or it's drive spline.

Jul 08, 2013 | Honda Odyssey Cars & Trucks

1 Answer

I remove the wiper arm & the outsdie lock of the shaft,remove the screws that hold the wiper motor inside, to I need to remove the 20mm nuts that hold the rubber seal outside the glass (in which I can...


IF YOU TALKING ABOUT REAR WIPER MOTOR REMOVAL YOU HAVE TO REMOVE PULL THE REAR WIPER ARM COVER BACK TO ACCESS THE WIPER ARM RETAINING NUT.DETACH THE NUT AND PULL WIPER ARM STRAIGHT OFF THE SHAFT TO REMOVE IT.

Nov 26, 2010 | 2000 Honda Odyssey

1 Answer

I installed a new wiper motor. I ran it before installing the wiper arms. it will not stop at zero. it over travels down into the cowling. I try to rest them higher then they stop some where in the middle...


Try to run the motor without the wiper arms tightened down and turn it off so it can cycle down to its rest state. Then install the wiper arms.

Make sure, that the car's windshield wiper wiring is correct for this motor.
---
Wiper Arm & Blade Removal & Installation Front To Remove:
CAUTION
When the wipers are parked (off), the driver’s wiper arm must be above the passenger’s wiper arm.
  1. Remove the clip holding the outside end of the wiper arm cover to the arm.
  2. Lift the arm cap up to expose the nut.
  3. Remove the wiper arm mounting nut.
  4. Using a suitable two jaw puller, remove the wiper arm from the wiper pivot.
To Install:
  1. Verify that the wiper motor and linkage are in the parked position.
  2. Place the wiper arm in position over the wiper pivot.
  3. Install the nut to hold the wiper arm to the wiper pivot. Torque nut to 26 ft. lbs. (35 Nm). CAUTION
    Make sure to tighten the wiper arm nut properly.
  4. Push the arm cap cover down.
  5. Secure the clip holding the cover to the wiper arm.
Rear To Remove:
  1. Lift and hold the wiper arm away from the rear window.
  2. Lift the lock securing the wiper arm to the pivot.
  3. Slowly release the wiper arm so it rests against the lock.
  4. Remove the wiper arm from the pivot.
To Install:
  1. Install the wiper arm on the pivot.
  2. Pull the arm outward and release the lock.
  3. Gently release the wiper arm until it rests on the rear window.
prev.gif next.gif

Aug 22, 2010 | 1996 Dodge Grand Caravan

1 Answer

C hange rear blade 2008 gmc


At the mounting area of the blade to the rotating wiper arm is a tab that has to be pushed in and held to remove the wiper blade. The tab will be on the wiper blade's center housing ansd is very small to see

Apr 25, 2010 | 2008 GMC Acadia

1 Answer

2006 CRV rear wiper not working


Inspect the wiper where it attaches to the motor for any broken or missing parts. Also, examine the wiper itself for damage. If so replace it with another from your local auto parts store. Also if you ask, they will install it for you.

Apr 21, 2010 | 2006 Honda CR-V

1 Answer

Replace the rear wiper arm shaft


There is a plastic cover that pops off at the pivot end of the wiper arm. pulling up on this with a hook of some kind from the furthest end should release it. Under it you will find a nut that holds the wiper arm to the shaft. It's quite common for the nut to come loose and the shaft spins without moving the arm. Try tightening this nut (with the ignition on, be sure the wiper motor is off, then turn off ignition and put the wiper arm in the parked position). This is a common problem if you've ever tried to turn on the wiper when it was frozen to the glass.

Feb 26, 2010 | 2000 Honda Odyssey

3 Answers

How easy is it to replace the front wiper motor on a 2004 ford escape ? Where is it located ?



Front Wiper Motor
Removal & Installation

NOTE A new wiper motor assembly comes with the linkage arm installed.
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove the windshield wiper mounting arm and pivot shaft
    WARNING Do not remove the wiper motor linkage arm from the wiper motor assembly. If the arm is removed, the wiper arms may not park in the correct location.
    NOTE Use a suitable tool to separate the wiper linkage arm from the wiper mounting arm and pivot shaft assembly.
  3. Remove the 3 bolts and the wiper motor.

    7f7866e.gif

    Fig. Wiper motor and linkage

To install:
  1. Install wiper motor and bolts.
  2. Tighten wiper motor bolts to 10 ft. lbs. (13 Nm).
  3. Install windshield wiper mounting arm and pivot shaft.
  4. Check wiper operation.

Rear Wiper Motor
- Removal & Installation
  1. Remove the rear pivot arm.
  2. Remove the rear wiper motor shaft nut cover
  3. Remove the rear wiper motor shaft nut.
  4. Open the lift gate window.
  5. Remove the rear wiper motor cover trim panel.
  6. Disconnect the electrical connector.
  7. Remove the 2 rear window wiper motor nuts
  8. Remove the rear window wiper motor.

    79be491.jpg
    Fig. Rear wiper motor view-2008 model shown, other years similar

To install:
  1. Install rear wiper motor and tighten mounting nuts to 62 inch lbs. (7 Nm).
  2. Reconnect the electrical connector.
  3. Install wiper motor cover trim panel.
  4. Install rear wiper pivot arm tighten nut to 53 inch lbs. (6 Nm).
  5. Install shaft nut cover.
  6. Check wiper operation.

Good luck (remember rated this post).

Feb 25, 2010 | 2004 Ford Escape

1 Answer

How do I replace the rear wiper arm on a 2008 Kia Sedona? I took the nut off, but the rear wiper arm doesn't come off; as if it were glued on. The new wiper doesn't show grooves like you would normally...


Your wiper arm has an interference fit which means it is essentially pressed on. The best way to remove it is to buy a wiper arm puller, which will have two arms that fit underneath the arm and a bolt that will push on the wiper post, they are pretty slick it should pop right off. Any auto parts store should be able to furnish you with the tool. If you're not going to use it alot, you might call your dealership (or friend with lots of tools) and see if they will pop it off for you.

Dec 05, 2009 | 2007 Kia Sedona LX Minivan

2 Answers

Odyssey Rear Wiper upside down


The rear wiper should be able to come off from the rear. What do uyou mean "upside down?" at the pivot end there should be a nut, take it loose and adjust the arm.

Nov 02, 2009 | 2001 Honda Odyssey

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...