Question about Jeep Cars & Trucks

Open Question

How to calibrate the headlights

I would like to calibrate the headlights of my car, but I don't know how,,, Right now they barely point on the street.

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 224 Answers

SOURCE: leaking on the right side

If it leaks after running the air conditioner it is perfectly normal and you do not need to fix anything, it is from the condensation drain line and it needs to drain to prevent water from leaking inside the vehicle.

Posted on Jun 28, 2011

gms19562012
  • 86 Answers

SOURCE: need to fix left/right headlight aiming......adjusters don't seem to work

replace headlight assy

Posted on Sep 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlights not working


The new headlights, probably blew the fuse check the fuse and relay if so get a bigger fuse to run the new headlights. Remember when replacing any light in your vehicle to not touch the glass part of the bulb with your bare fingers..

Jun 21, 2013 | 2007 Dodge Caliber SXT Sport Hatchback

1 Answer

Headlights work, but dashlights don't work


probably headlight switch known to be crappy look for melted wires on back of switch
also google cherokee forums theres at least 4 or 5
cherokeeforums.com naxja.org, cherokeetalk.com jeeps unlimited.com, jeepgarage.com

u do know i assume commanche is a cherokee pickup

Feb 04, 2013 | 1986 Jeep Comanche

1 Answer

Headlight goes on and off jeep2010 wrangler Sahara


Hi There,

Thanks for the question,
I had a similar problem with the headlights turning on and off.

What you need to do is just check the earthing inside the bonnet , usually it's to the right hand side when you stand facing your vehicle and is placed near one of the headlights.

Just ensure that the earthing is tight and not loose and your problem will be solved.

If you don't want to do it yourself, just don't worry go to a mechanic and tell him to fix the earthing as your headlight is turning on and off and he will know that you are knowledgeable and won't take advantage of you by cheating you.

If this does not work then just check one of the electric cutouts that belong to the headlights and then just ensure that they are fitted perfectly.

Hope this helps.

Regards,

Sajjad

Jun 07, 2012 | 2010 Jeep Wrangler Sahara

1 Answer

I have a 1996 Mazda protege I'm having trouble


Most bulb sockets can experience wear, and tear...after carefully removing the bulb, inspect the contact points inside the socket for cleanliness or damage...the natural grease on our hands can affect the bulb life on most bulbs...especially headlight bulbs so wear soft gloves and do not touch the clear element of the bulb...BE SURE to use bulb/socket lubricant when reassembling...this assures good contact and helps to weatherproof...this lubricant in small pouches is about $2. Worst case scenario...replace the problem sockets...new, or from a salvage yard. Hope this helps.

Mar 16, 2012 | 1996 Mazda Protege

1 Answer

Head lamp harness


No - the worst electrical problem that the headlamp harness could cause is to short itself to ground somehow (bare wire, unplugged & turned on, etc), which would blow the headlight fuse.
However, dashboard problems can cause headlight problems, since the headlight switch is located in the dash.
The common point between the headlight problems, dashboard problems, and "electrical problems" would be the under-dash wiring and/or wiring harness from ECC (Engine Control Computer, aka "the car's computer) to the dashboard - check here first for grounding/shorting problems, or water leaking out of the in-dash vents onto a wiring harness.

Dec 09, 2011 | 2006 Chevrolet Cobalt

1 Answer

How to change the headlight bulbs on my 2007 mazda 6


  • Disconnect the negative battery cable.

  • Now look at the diagram below and notice where the arrow points. You want to carefully press down (don't break that tab) and remove the back cover to the headlight assembly


11_6_2011_12_45_19_am.jpg

  • Now get behind the headlight (under the hood) and the top wires are your headlights.

  • Gently tug it out and pop the old light strait out.

  • When replacing the new bulb in the socket don't touch it with your fingers or the oils on your finger will make that bulb blow within seconds. Wipe it real clean with a clean cloth if you accidenatly do.

  • Reverse the rest of the steps to complete.

  • Hope this helps.

Nov 06, 2011 | 2007 Mazda MAZDA6

1 Answer

Need to adjust the low beams on my '02 Hyundai


Headlight adjustment is fairly straight forward, you will need to park the car on a level surface with a fence or wall 25 feet away and a reference point for measurements to the right or left of the car. First measure from the reference point to the center line of the car then transfer that to the wall, second, measure from the center of the car to the center of the headlights and transfer those to the wall, third, measure from the ground to the center of the headlights and transfer that to the wall. Once all of the reference points have been transferred, adjust the left (driver's side) headlight so that the most intense part of the beam is 2 inches below and 2 inches to the right of the left mark, the right (passenger side) headlight should be adjusted so that it will be 2 inches below and 1 inch to the left of the mark. If done correctly, you will have very good night vision without blinding oncoming traffic.

P.S. Please note that any heavy objects in the car will be a factor in correct headlight adjustment, have the car loaded as it will be normally used.

Aug 20, 2011 | 2002 Hyundai Accent

2 Answers

The black, round "collar that holds the headlight


The part you are referring to is the headlight socket. The link below will take you the part in question. This is what to look for. Most auto parts stores should carry this part.


2001 Villager Headlight Socket

Aug 12, 2011 | 2001 Mercury Villager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...