Question about Cars & Trucks

1 Answer

Ok on my 98 Chevy s10 I've pin pointed down to the

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 5,366 Answers

If you can make the injector click without cranking the engine, the injector ground circuit is bad, probably the computer.
If the injector only clicks when cranking, the ground circuit is working right, so the problem is with the injector drive circuit. There should be a fuse for the injectors in the power distribution box by the battery. Have you checked for that? Also check for power to the fuse with key on. Use a testlight or voltmeter to check for power.

Posted on Nov 08, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 2000 chevy blazer, truck cranks

Does your battery go dead?

Posted on Dec 18, 2008

  • 9 Answers

SOURCE: 1997 dodge dakota v6 engine wont start replaced

turn the key to the on position a see if you can here a buzzing sound around the fuel tank,if you don't hear a sound then. (be very careful while doing this) with the key off take a fuel line coming from the tank loose,make sure its pointed away from you and turn the key to the on position,see if any gas comes out,if not then your fuel pump is probably bad.

Posted on Mar 05, 2009

hawkwindbear
  • 5 Answers

SOURCE: 1987 chevy engine problem

you have to reset base idle see manual at library for procedure

Posted on Jul 19, 2009

  • 5 Answers

SOURCE: 1987 Chevrolet S-10 Pickup1987 chevy s10 2.5l tbi

Check the trottle body postioning sensor...

Posted on Jul 19, 2009

pippall
  • 1486 Answers

SOURCE: 1987 chevy S10 engine idle problem

relace the throtle air idle valve.The temp switch will allso cause this problem.

Posted on Jul 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Heater core replacement 98 chevy S10 2.2L engine


Tyrone, Check the attached links,instruction and guides, the last link has some very good info. and pics. on S10 heater core replacement. Good luck.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Heater core replacement 2000 S10 4 3L slideshow picture
How to Change Heater Core on 1994 Chevy 10 Blazer GMC Jimmy Oldsmobile...
98 GMC Jimmy Heater Core Replacement Video Diary
Heater core replacement procedure 99 S10


Jun 16, 2016 | Cars & Trucks

1 Answer

My 98' Chevy S10 Warning lights stay on after it is turned off and the key is taken out


I would suggest you take it to a Chevy Mechanic/Dealership. This maybe a common problem inherent to this make/model. Sounds like a relay issue. Various recalls were issued for this make if I recall. Always good to have the dealer check those.

Mar 15, 2014 | Cars & Trucks

1 Answer

Door pin and bushing


If your S10 is a 2001, your best bet is likely to be a junk yard

Jun 27, 2013 | Chevrolet S 10 Cars & Trucks

1 Answer

2000 Chevy S10 passeger door won't open


Remove the door panel and inspect the latch rods for damage or broken retention clips. A video is below of how to remove the panel.

Nov 06, 2012 | 2000 Chevrolet S-10

1 Answer

1972 olds 98 455ci starts and runs fine when its cold but once i've driven it for awhile it starts sputtering like its running out of gas


sounds like a vapor lock. older cars needed a set of points . they kept firing times in sync with fuel delivery , valves opening/closing try that.

Jul 29, 2012 | 1972 Oldsmobile 98

2 Answers

Brake pedal on my 98 chevy s10 is soft


1988 chevy r 3500 1 ton changed out driver front brake caliper
brakes are soft peddle goes to the floor tried to bleed but no brake fluid will come please help

Apr 14, 2010 | 1988 Chevrolet C1500

1 Answer

89-98 chevy blazer


It's not worth doing all that conversion, buy the time you spend the time and money to convert the 89 4.3 to work on the 98 blazer, it would be cheaper to install a 98 vortec rebuild. The 89 4.3 have a TBI fuel injection system and the ecm on the 98 will not work and the bad news is that the ecm on the 98 also controls the transmission shift points and the 89 will not, so even if you swap the ecm to have the 89 4.3 engine work. the transmission will not shift. Sorry for the bad news but it would be cheaper to replace the 98 engine with the years of 1996 to 2001. Good luck and hope this helps. 

Jul 21, 2009 | 1989 Chevrolet S-10 Blazer

1 Answer

98 chevy S10.Tried bleeding brakes,Front ok,Rear not reacting


Check the master cylinder and make sure it is working correctly and both resevoirs are full.

Jun 28, 2009 | 1998 Chevrolet S-10 Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...