Question about 2010 Nissan Altima

Open Question

VSP/slip light stays on & brake light on & off

Vsp/slip light comes on after driving a mile or two. Brake light comes on and off at times.Does this even when roads dry.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: 2003 Nissan Sentra Brake lights stay on

When you depress the brake pedal, the brake pedal will move away from the brake light switch and cause a close circuit and the brake lamps light up. There is a rubber bunk on the pedal which pushes against the brake light switch to shut it off when you release the brake pedal. Most likely this rubber bunk has either fallen off or disintegrated leaving a hole in the brake pedal so there is nothing to push against the switch to shut it off. Look up the brake pedal until you see the brake light switch, then depress the brake pedal to see if the rubber bunk is still there. It is easy to replace. Or you can use some double sided adhesive tape and a coin and stick the coin over the hole in the brake pedal.

Posted on Oct 23, 2008

  • 1 Answer

SOURCE: brake lights stay on all of the time, ABS light on when driving

You most likely need to replace your brake switch, which is a
a $8 part. If you look up along the brake peddle you will see it depressing a switch. on the end of that switch is a electrical connector that you can press on one side to remove.
Once removed your brake lights will be disconected and your ABS
light should go off. You then need to replace the switch that it pluged in to.

Posted on Apr 12, 2009

  • 383 Answers

SOURCE: Brake lights stay on when lights are on

randyref: The most common problem with the Nissan's when it came to brake lights staying on, was a little plastic stopper button
which is located up near the top of the brake pedal arm.
If you follow the brake pedal arm up, you will find the brake light switch. If you push the pedal down, feel where the brake light switch is suppose to contact the pedal frame.
You will probably discover that there is a hole there instead of something that the switch was to come in contact with so it could be compressed which in turn, opened the circuit causing the brake lights to go out.
The part is available from Nissan and usually is stocked because it is a common problem. I stock 3-4 in my shop and I'm not a dealer.
The part it self is a round semi soft clear plastic disc with a small button which you push through the hole in the pedal frame, where it snaps in place.
I'm willing to bet that this will solve your problem. Check it and get back to me.

Posted on Apr 20, 2009

keithheavili
  • 410 Answers

SOURCE: brake light and stop brake light stay on after car is turned off. This is killing the battery. Tried changing the 15 amp breaker under sterrting column

Your brake light switch is eith stuck or gone bad.  It is located on the brake pedal and you can try to jiggle it to see if it will free itself and turn the lights off or you will need to replace it.  It's a pretty easy job and relatively inexpensive.  Let me know if you have any other questions.  Thanks for rating my response and for using FixYa!

Posted on May 28, 2009

  • 1 Answer

SOURCE: BRAKE LIGHTS STAY ON

At the top of the brake pedal, there are 2 small hard plastic fittings that fit into 2 holes. When those plastic fittings get old, they get brittle and break and then fall out. Those plastic fittings are what push against the brake light sensor. So when they fall out, there is nothing that "trips" the brake light sensor. They cost 10 bucks at nissan. Try that first. Bet that does it. It did for me !!

Posted on Jul 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 Camry - VSP light is on. Is this a sensor on the brakes? Can it be fixed at home?


Yes, of course ... provided you have three things! The know-how, the right tools/equipment, and the right PART(S)!

May 11, 2017 | Cars & Trucks

1 Answer

Why does my car accelerate without pushing the gas pedal and my check vsp and engine light comes on?


can be throttle body -computer - transmission problem have the vehicle scanned for the trouble code most auto stores offer this service for free the code will be start point towards correcting problem

Oct 17, 2016 | 1998 Lexus LS 400

1 Answer

Antilock brake light on & off


sounds like the brakes need to be bleed

Aug 18, 2012 | 1987 Ford Bronco II

1 Answer

Vsp and check engine lights are on. why?


You have to have a shop or parts store do a FREE OBII scan to read faults that triggered lights to determine what has failed.

Feb 23, 2011 | 2004 Lexus SC 430

2 Answers

Brake light stays on


the switch for your brake lights is located near your brake pedal,it is usually a spring loaded switch that comes out when the pedal is pushed & the pedal pushes it back in when it is released,this switch may have come loose & is active all the time,you need to make sure that it is pushed hard up against the brake pedal & tighten the adjusting screws to lock it in position,check that your stop lights come on when the brake pedal is pushed in....hope this helps....cheers

Jul 09, 2010 | 1997 Nissan Pickup

1 Answer

No speedometer, everything else on cluster works


it may be the vsp or (vehicle speed sensor) it should have triggered the check eng light. If no check eng. light check the sensor connection. this is located on top side of tranny. let me know what you find.

Apr 27, 2010 | 1999 Dodge Caravan

3 Answers

Brake light stays on just happened 143000 miles


Check your brake switch as it could be faulty hence causing a close circuit which in turn causes the brake light to stay on.It is normally located at the top of the brake pedal.Hope this helps.

Feb 11, 2010 | 2003 Chevrolet Astro

1 Answer

ABS & Brake warning lights turn on


it is possible but its also possible you have a wheel speed sensor acting up. you would have to have it scanned for codes

Jul 09, 2009 | 2002 Buick LeSabre

1 Answer

Battery and brake indicator light stays on after start


When the lights are on check the battery voltage. Should be 13.0 to 14.5. If you unplug the connector on the alternator when the lights are on, do they go off?

Mar 11, 2009 | 1994 Nissan Pickup

Not finding what you are looking for?
2010 Nissan Altima Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

723 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...