Question about Cars & Trucks

Open Question

Hello, I have a Balco wheel balancer, model B93 and it says it needs calibrating, I have no manual so some guidance on how to calibrate it or how to get a manual would be most appreciated. Thanks

Calibration advice or where to get a manual .

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 4340 Answers

SOURCE: Compass calibration Hummer H2 2005. Compass

There is an offset that is used. I need to know what area of the world you live in. Then there is a digit that you set the compass to. and it is then CLOSER to actual.

Posted on Sep 07, 2009

Testimonial: "This together with the standard procedure helped! Thanks! "

Ad
  • 484 Answers

SOURCE: Clutch calibration on a manual shift 2004 Mazda3

i'm not sure what you mean, "calibrating the clutch". Is the pedal sinking to the floor or not engaging the clutch well? If it seems spongy, there may be air in the line and it will need to be bled. If it does not engage well at all, check your clutch master cylinder for proper level of fluid in the reservoir or any fluid leaking out, the hose for leaks and the slave cylinder for any leaks. If they are, then whatever part was bad will need replacement.

Hope this is a little help,
matt

Posted on Sep 17, 2009

Testimonial: "Thanks, I was thinking of aclibrating becasue I though about the old wire clutches. This is not a wire clutch. Thanks"

  • 333 Answers

SOURCE: yes I need te calibration (gap) for this auto

NGK BKR5E-11
DENSO K16PR-U11
CHAMPION RC10YC4
Gap 0.039 - 0.043 in (1.0 - 1.1 mm)
Torque 15 - 20 ft.lb

Posted on Sep 25, 2009

Testimonial: "Hey Superbovine thanjs so much for all you help a was great because the auto parts stores doenst have this info........ THANKS AGAIN"

  • 271 Answers

SOURCE: Hello,I am overhauling a 4hf1 engine and need

Main bearings - stage 1-80 Nm; stage 2-100Nm.Big ends-stage 1-22Nm,stage 2 -45Nm.Flywheel/drive plate-55Nm.Crankshaft puley-120Nm.Cil.head as main bearings.Valve clearance - cold - inlet-0.15 , exhaust - 0.25. Timing 6/800 at sea level.Good luck!

Posted on Nov 28, 2009

Testimonial: "THANKS FOR THE INFORMATION. VERY HELPFULL. KENNETH. "

  • 4340 Answers

SOURCE: The compass indicator in the

There is usually an OFFSET needed to have the compass work correctly. Specific settings should be specified in the owners manual, and you should be able to do this, as you would need to do so as you traveled long distances....

Posted on May 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2007 checy impala read "calibration complete" what does that mean ????


CALIBRATION COMPLETE
Refer to Electronic Compass Calibration do you have an owners manual ?
Compass Calibration
The compass direction will show CAL if it needs to be calibrated. Before calibrating the compass, drive the vehicle to an area that is magnetically clean (free of large metallic objects).
  1. Turn ON the ignition.
  2. Before calibrating the compass, make sure the compass is set to the variance zone in which the vehicle is travelling. See Compass Magnetic Variation Adjustment below.
  3. Press the vehicle information button until the PRESS TO CALIBRATE COMPASS screen is displayed.
  4. Press the set/reset button to start the compass calibration.
  5. The DIC will display CALIBRATING: DRIVE IN CIRCLES. Drive the vehicle in circles at less than 8 km/h (5 mph) to complete the calibration. The DIC will display CALIBRATION COMPLETE when the calibration is complete.

Oct 02, 2016 | 2007 Chevrolet Impala

1 Answer

Need to know how to calibrate


What is it exactly you're trying to calibrate? typically in any form of calibration, you need a unit and method of measure, initial specifications so you know where you're calibration needs to be set before, during, and after your work. and a method of adjusting the item to be calibrated. usually a haynes manual, or other form of service manual will provide you with more detailed instructions on the specific type of car/truck/ etc you're working on. Hope this helps

May 09, 2016 | Cars & Trucks

1 Answer

What is calibrate compass on 2004 Buick Rendezvous


Manual Compass Calibration If the compass appears erratic and the calibration symbol does not appear, you must manually put the compass into the calibration mode. To get into this mode, do the following: 1. Turn the ignition on and cycle the DIC to the compass/temperature mode. 2. Press and hold the SET button for longer than three seconds. ZONE # PRESS & HOLD SET TO CHANGE: This display mode will be displayed when you are manually calibrating the system. The current zone number for compass variance will be displayed in place of the # symbol. Use the SET button to select the zone number from the graphic shown to select the current area of the country that you are driving in. PRESS SET TO CALIBRATE COMPASS: After selecting your zone, press the MODE button and this will be displayed on the DIC. Press the SET button and complete three 360 degree turns in an area free from large metal objects. The following two messages will toggle in the display until you calibrate the compass: • DRIVE VEHICLE IN CIRCLE • CALIBRATING COMPASS When calibration is complete, the display will return to its normal mode. 3-61 info obtained from MANUAL OWL
press the helpful button and follow me on fixya for more tips

Compass Variance Zone Procedure DIC Compass Driver Information Center DIC...

http://www.manuals365.com/swf/buick/2004_buick_rendezvous_owners.html?page=200

http://repair.chiltondiy.com/Buick/Rendezvous/Repair-Manual-Online
http://www.repairservicemanuals.com/Buick

Feb 02, 2016 | Buick Cars & Trucks

1 Answer

What is calibrate compass on 2004 Buick Rendezvous Vous


Manual Compass Calibration If the compass appears erratic and the calibration symbol does not appear, you must manually put the compass into the calibration mode. To get into this mode, do the following: 1. Turn the ignition on and cycle the DIC to the compass/temperature mode. 2. Press and hold the SET button for longer than three seconds. ZONE # PRESS & HOLD SET TO CHANGE: This display mode will be displayed when you are manually calibrating the system. The current zone number for compass variance will be displayed in place of the # symbol. Use the SET button to select the zone number from the graphic shown to select the current area of the country that you are driving in. PRESS SET TO CALIBRATE COMPASS: After selecting your zone, press the MODE button and this will be displayed on the DIC. Press the SET button and complete three 360 degree turns in an area free from large metal objects. The following two messages will toggle in the display until you calibrate the compass: • DRIVE VEHICLE IN CIRCLE • CALIBRATING COMPASS When calibration is complete, the display will return to its normal mode. 3-61 info obtained from MANUAL OWL
press the helpful button and follow me on fixya for more tips

Compass Variance Zone Procedure DIC Compass Driver Information Center DIC...
http://www.manuals365.com/swf/buick/2004_buick_rendezvous_owners.html?page=200
http://repair.chiltondiy.com/Buick/Rendezvous/Repair-Manual-Online
http://www.repairservicemanuals.com/Buick

Feb 02, 2016 | Buick Cars & Trucks

1 Answer

How do I calibrate a Coats 700 tire balancer?


go to google --type in nytechsupply.com and there is a full operatots manual for that machine
you tube states that it is an auto calibrated machine
there is a calibration check procedure in the operators manual and again it states that the calibration is to fine tune for single spin operations.
I found this by typing into google---calibrating a coats 700 tyre balancer and there are pages which included the nytecsupply page.

Feb 07, 2015 | Cars & Trucks

1 Answer

Hello, my name is Lydie Dobri , my 2008 Lincoln MKX keep saying on the dash board calibration complete. what does it mean? lydieleby@yahoo.com


It can mean the Compass has been calibrated. It can mean the GPS has been calibrated. Someone could have switched from Kilometers to Miles and results were converted.

Jan 27, 2015 | Lincoln MKX Cars & Trucks

1 Answer

I need a calibration manual for a BM Autoteknik brake tester BM7010


hi there
are you interested to sell the rig and the weights?cheers

Feb 20, 2012 | Cars & Trucks

1 Answer

Calibration procedure


You have this in the wrong product category, this is Cars and Trucks. Please repost so the correct expert sees it.

Feb 16, 2012 | Cars & Trucks

1 Answer

My truck runs rough while driving at a steady speed


It is due to roughness in the engine fuel settings. It will be good to calibrate the fuel to see if the enigne is smooth.
Check the fuel. check for wheel balancing.

Sep 11, 2010 | 1981 Ford F 150

2 Answers

Steering Wheel shakes at 60+


IT HAS TO BE BALANCE if it was shocky related or loose wheel bearings it would have been in evidence before the tyre change ---I would recommend you take it to one of the better tyre only establishments and ask them to balance your 2 front wheels both inner and outer please let me know the result, imay learn something------------------------but I doubt it

Aug 14, 2009 | 2004 Jaguar X-Type

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...