Question about Cars & Trucks

1 Answer

How do i fix my car door on my 2001 blazer

Door will not shut ,,theres air gaps

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 75,822 Answers

If the latch is ok and fully latching the door shut then you may need to adjust the door and or replace the door edge gasket. Door adjustment is best left to a body shop or other repair shop like a dealer. The gasket on most GM is held on by plastic snap in clips and easy to replace.

Posted on Nov 08, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 blazer door latch won't open


I too have had this issue. This is what I did too solve problem
step 1 spray with brake cleaner to remove all foreign materials
step 2 check operation with screw driver and door handle.
step 3 check that bar on body is aligned properly with catch in door
step 4 use large torx bit to loosen bar and align with door catch then retighten
step 5 lube catch with white lithium grease or equivalent not ( water displacer 40) problem should be solved

Aug 02, 2014 | 2001 Chevrolet Blazer

1 Answer

I have a 2001 chevy blazer that is missing i have already replaced the distributor ,cap and rotor button and the plugs and wires what else do i need to check


make sure spark plugs gaps correct for the 4.2 engine gap need to be 0.050 for the 4.3 engine gap need to be 0.060. replace fuel filter and clean fuel injectors. missing problem also caused by weak ignition coil.vacuum leaks around intake manifold look for leaking hoses.if all is good do a compression test engine could have burn out valves.

Aug 02, 2013 | 2001 Chevrolet Blazer

1 Answer

Was rear ended and car frame is visibly bent down. My car is worth maybe 4 to 5 thousand and i dont know if the insurance company is going to consider it totaled or fixable. Its a 2001 Chevy Blazer,


You won't know until you take it to a body shop and get an estimate for repairs.
There may be hidden damage behind the bumper cover too.
The vehicle is a total loss with repairs cost more than 75 percent of replacement value with most insurance companies.

Jan 20, 2013 | 2001 Chevrolet Blazer

1 Answer

The driver side door on my 2002 chevy blazer wont close.how do i fix it?


Door pins are a common failure on that series of Blazer/S10's. Also, another point of contention that the door faces is a sticky latch. Basically, the door latch re-latches itself and when you shut the door into the catch, it slams into it and bounces off. An easy fix is a 3 part cocktail of brake parts cleaner. Open and shut the latch with a screw driver acting as the catch and your interior door handle a few times. P'Blaster, open and shut the door a few times with the screwdriver acting as the catch. Finally, a good shot of white lithium grease. Open and shut the door with a screwdriver as the catch several times. Once you feel it is un-stuck, actually close and open the door several times. If you notice the door rising every time it catches, you MUST replace the door pins (cheap fix). If the door still has issues, replace the door latch (and since you're in there, do some PM and replace the actuator as well).

Apr 08, 2012 | 2002 Chevrolet Blazer

1 Answer

I asked about the left front door of my 2001 2dr blazer it is hanging and not aligned


The door hinge bushings are worn out or the hinges are worn out.

Jan 05, 2012 | 2001 Chevrolet Blazer

1 Answer

2001 ZR-2 BLAZER HAS 4.3 V6 KEEPS GIVING P 0410 trouble code = secondary air injection system. What is this fault code saying and what is the fix?


your vehicle has an air pump that puts air in to the exhaust cooling it to reduce nox gasses most likely the pump has sucked up water shorting it out and blowing the fuse. there is an updated pump inlet and pump to fix this problem also need to replace the fuse after replacing pump.

Dec 16, 2010 | 2001 Chevrolet Blazer

1 Answer

2001 blazer heater blows air from the dah only. when the selector is changed, the air doesn't flow to the floor or defroster. Temp control does work.


sounds like the air selector cable came of the door on heater box ,can't remember if there is a cable or a motor,they do the same thing.You need to check the door operation on the heater box

Nov 19, 2010 | 2001 Chevrolet Blazer

1 Answer

Jeep 2001 Cherokee Sport Rear Passenger door was hit. Lights will not go out.


Can you open the door? Most likely the door is not making (enough) contact with the plunger which shuts off the lights. If you can get to this plunger, until you get the door fixed, either tape the plunger to the "in" position, or tape something to the door itself to close the gap between the door and the plunger to make the plunger go in. I have had to use quarters (25cents) and duck tape until more permanent repasirs could be made.
Also: there should be on your dash: panel and interior light dimmer/turn off switch. You can turn this/set this so the interior lights do not come on at all.

Dec 25, 2009 | 2001 Jeep Grand Cherokee

1 Answer

Abs


There are speed sensors for the abs in the front wheel bearing assemblies. Rust builds up and changes the air gap between the speed sensor and the reluctor ring inside of the hub. The rust needs to be cleaned away to restore the proper air gap it fix the problem.

Sep 03, 2008 | 1997 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...