Question about Honda Cars & Trucks
If the engine isnt running this is ok! Otherwise there is an issue with your security system.
Posted on Nov 08, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2007 Forester Parking Lights
I read my owner's manual in a more deliberative manner and found that there is a Parking Light switch on the steering wheel column that I had never seen before. Apparently, when I was cleaning my care, I inadvertently flicked that switch. Good thing I didn't go to the auto repair shop and ask for them to fix it! :)
Posted on Aug 18, 2008
From page 232 in the 2007 Honda Pilot Owners Manual.
1. Turn the ignition ON.
2. Press the Select/Reset knob until the engine oil life indicator is displayed.
3. Press the Select/Reset knob for more than 10 seconds. The engine oil life and maintenance item code(s) will blink.
4. Press the Select/Reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to "100".
Posted on Apr 23, 2009
You need to push the car into Park harder and the key will pop right out :) even if it is off just push the gear in harder..
Posted on Jun 15, 2009
Call a locksmith. You may have to call several but I had one fix mine and it only cost about $200.00! To me that was a bargain because the dealership quoted me about $700.00.
Posted on Sep 21, 2009
to program a key fob- get in vehicle and close all doors. insert key into ignition, have all the key fobs you want to program for this vehicle in hand, programing erases all old fobs. turn the ignition switch to on(all dash lights light up, on click before starting the car). then hit the lock button on one of the fobs. turn the ignition to lock. turn the ignition back to run and press the lock button again from the same remote. repeat untill all the locks cycle. ones the locks cycle keep the ignition in run and press the lock button on each key fob(the ocks will cycle each time a button is pressed). then turn the ignition to lock after all fobs have been programed
Posted on Mar 17, 2010
Tips for a great answer:
Jan 01, 2016 | 2005 Honda Pilot
Mar 09, 2015 | 2003 Honda Pilot
Feb 22, 2011 | 2007 Chevrolet Silverado 1500HD
Mar 23, 2010 | 2004 Honda Pilot
Dec 31, 2009 | 2009 Honda Pilot
Jun 11, 2009 | 2002 Honda Odyssey
Apr 19, 2009 | 1993 Buick Park Avenue
Apr 06, 2009 | 2007 Honda Pilot
Feb 27, 2009 | 2007 Honda Pilot
277 people viewed this question
Usually answered in minutes!