Question about Cars & Trucks
Go back under the truck and check to make sure all the fusible links at the starters battery post are hooked up and have continuity through them. I thank you left one off.
Posted on Nov 08, 2012
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Check the wire from the battery at the starter there is a tab to keep it from spinning when you tighten the nut,it may be touching the other nut on the solenoid causing the starter to spin.You can also remove the wire on the solenoid that engages it then it should not spin.If it does it is a starter problem
Posted on Nov 29, 2008
SOURCE: How do I replace the starter
the starter will be at the rear of the engine. Disconnect all of the cables, remove the 3 or 4 bolts that hold it in. Pull it straight out of the engine. Install the new starter. Starters are fairly straightforward, but sometimes awkward to reach.
Posted on Dec 04, 2008
You would have to check and see if you are getting any power out of the light switch. There is a seperate wire for the headlights and the dash lights.
Posted on Dec 09, 2008
disconnect head lights, and replace fuse. Then turn the light back on to see if it blow a fuse again. if not, plug on light in at a time. You might have a bad headlight???? then unplug that one if nothing happens. Then plug the other one in. It could also be a bad taillight bulb. I have had bad tail light bulbs. Do all of them, one at a time.
Posted on Feb 14, 2009
Tips for a great answer:
Apr 18, 2015 | 1996 GMC Jimmy
Jan 20, 2014 | 2001 GMC Jimmy
Jan 30, 2013 | 2001 GMC Jimmy
Jan 15, 2013 | Cars & Trucks
Nov 29, 2012 | 1995 Toyota Camry
Jun 12, 2011 | 1998 GMC Jimmy
Sep 05, 2010 | 1995 Honda Civic
Dec 02, 2009 | 1995 Jeep Grand Cherokee
73 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: